I do not have a SIZE menu option on my new message box and the photos keep resizing very small

Mail keeps reducing the size of photos in messages. I do not have a menu bar at the bottom to allow changes to size. I cannot find anywhere to change or allow me to have a resize control.

The problem is that I do not have a size control, pop-up or other to select. I noticed on another similiar discussion there was an option at the bottom of the page but mine has none. I have checked for updates for Mail but I have everything up to date. As a last resort should I re-install Mail. If so, how do you do this ???. Thanks Rick

Similar Messages

  • I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program?

    I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program? If not how do I clear off the old site so as to re publish with Iweb.

    iWeb cannot import published files so you would need rebuild the site.
    Yahoo hosting is notoriously poor and their tech support is awful. I would suggest you look for new hosting and start afresh. Some pointers for choosing hosting...
    http://www.iwebformusicians.com/iWeb/Website-Hosting.html
    If you do choose to go this route, transfer your domain name registration away from Yahoo to your new host.

  • In firefox, whenever i have my mouse over the page (not the toolbar section), any selection i have moves. For example - a text entry box and the cursor keeps returning to the start of the box. This is only in firefox, everything else works fine (IE and Ch

    I have an issue with FF. Whenever I have my mouse on the page (not the toolbar area) any selection I make gets altered in the following way:-
    Text boxes - The cursor keeps moving to the left.
    "Radio" buttons - Selection keeps moving up.
    This is only happening in FF, I am not seeing this behaviour in Chrome or IE.
    == This happened ==
    Every time Firefox opened

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • I do not have a screen anymore to start a new internet address, or the google window, although I uploaded twice the newest version.

    A few days ago my window at the top of the page suddenly disappeared, so now I cannot access new or quick to type in internet addresses anymore. As well, also the little google window on the right top side disappeared. To make things worse, even on another top bar were some icons, one of which looked like a house that - when klicked - got me to google. Now I have nothing but only tabs of old internet addresses to access, but not what I want, i.e. a new address that I usually just typed into the address bar.

    Full screen mode on Mac: command+Shift+F
    Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible:
    *"View > Toolbars"
    Open the Customize window to set which toolbar items to display:
    *View > Toolbars > Customize
    *Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
    *If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
    *If missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
    *If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
    See also:
    *http://kb.mozillazine.org/Toolbar_customization
    *https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing

  • TS1501 how to upload my photos to my pc computer?  I just bought a new iphone 5c and the photo's did not upload on itunes. help

    How do I upload my photo's from my iphone 4 to my pc computer.
    I want to load the photo's into my new iphone 5c

    Follow this Apple article for instructions importing your photos from your old iPhone to the computer: http://support.apple.com/kb/ht4083
    Once you have the Photos on your computer, open iTunes, plug in your new iPhone. Select you new iPhone in iTunes. Go to the Photos section at the top. Check the box to sync photos.  Choose the options for which photos to sync (all from a select folder or section or individual folders).  Click Apply.
    Here is a screenshot to help. (It's from a Mac but it looks identical in iTunes on a PC).

  • I have sent a message to a friend. Afterwards, I created a new message. And the message I have sent a while ago appears even if I haven't type anything. Can you find a solution for my problem please? :(

    I have sent a message to a friend. Afterwards, I created a new message again. And the message I have sent a while ago appears again even if I haven't type anything. Can you find a solution for my problem please?

    You're welcome! Glad you got things sorted out.

  • I have a pavillion g42. just installed a new hard drive and the first cd. now my screenis

    Have a pavilion g42 . I just installed a new hard drive. After installing the first CD the screen is just black. What next?

    thats2odd wrote:
    I have about 300 songs missing anyway to update the folder to add the missing songs?
    If you know the location and you have all the songs in there, you could try the below:
    For iTunes 9:
    Choose File > Library > Organize Library
    For iTunes 8:
    Choose File > Library > Consolidate Library
    For iTunes 7 or earlier:
    Choose Advanced > Consolidate Library.
    A message will pop up.
    For iTunes 9:
    Place a check next to "Consolidate files" and click OK.
    For iTunes 8 and earlier:
    Click Consolidate.
    This action copies all of your music and other media files to the new location.

  • HT201210 My iPad "settings, general" does not have an "update software" option. How do I update without that option?

    My IPad "setting, general" does not have an "update software" option. How do I update to the most recent version?

    UPDATING iOS
    Over the air updating of iOS needs iOS 5 or later so unless you have iOS 5 or later you will not see updating in setting
    The following link explains how to update
    This link explains  how to update using itunes
    This explains how to transfer purchases to your computer

  • Windows 8 does not have a USB boot option

    QuestionHow can I boot my Windows 8 laptop from a USB device? I created a recovery disk on a USB thumb drive.
    So far I have:
    Entered into the UEFI (BIOS) and set USB to boot first.
    Disabled secure boot.
    I tried to reboot using the general setup options for startup in the windows settings page. I choose boot from USB through the UEFI, but got an error message that system does not have a USB boot option.
    To confirm I also created a bootable DVD with an ISO burner, but my laptop cannot detect a DVD boot option either.
    I assumed that the firmware of the UEFI for this computer allowed a bootable USB but in practice I cannot seem to get this work.
    AnswerTo assist with not being able to boot from a USB device on a Windows 8 laptop, perform the following:
    Plug in USB bootable device.
    Hold down F12 when restarting and access UEFI menu (option is below drive list). If system is set to fast boot, CLICK HERE for instructions on entering the UEFI.
    Go to UEFI and make USB "1st boot".
    Disable secure boot.
    Go to the "Advance" Tab, select "System".
    Change boot order from UEFI to CSM.
    Save changes and exit (F10).
    Computer will restart and boot from USB drive.
    When finished go back into the UEFI and set defaults then save changes and exit (F10). Windows 8 will reboot normally next reboot.

    Done that, only choices are "Set up Firefox to Sync" & "Pair a Device". No ''UNLINK THIS DEVICE". Your turn.

  • HT4623 My iPad 2 was does not have a software update option under settings?  I bought it on ebay, is there a way to get it on there?

    My iPad 2 does not have a Softwarw Update options under the settings menu...any way I can get it on there?

    Update to IOS 5 or higher
    http://support.apple.com/kb/HT4972

  • A printer that I have connected to my iMac via usb in not showing up in printer options on my iPhone or iPad and it use to before I upgraded to 8.1

    A printer that I have connected to my iMac via usb in not showing up in printer options on my iPhone or iPad and it use to before I upgraded to 8.1. How can I fix this?

    Is it an Airprint-compatible printer, and is its WiFi enabled if it is? (see: About AirPrint)
    If it isn't an Airprint supported printer, then you need a 3rd party driver on your iMac to print from an iPhone. Such as Printopia. As it worked in the past you probably have such a printer driver installed; check and see if it's running.
    Beyond that try restarting the printer, restarting the phone, restarting your router, and restarting your computer.

  • For the last 10 days I have been unable to open the Mail account on my eMac (MacOS10.4.11). When I click on the icon in the Dock the only option I get is "Force quit" and the main Mail bar will not open any  choice. Any ideas?

    For the last 10 days I have been unable to open the Mail account on my eMac (MacOS10.4.11). When I click on the icon in the Dock the only option I get is "Force quit" and the main Mail bar will not open any  choice. Any ideas?

    You can setup Mail for iCloud on the eMac.
    Do not delete the old account yet. sign up for an iCloud account if you haven't.
    I understand .mac mail will still come through. Do not delete the old account yet.
    You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
    iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
    On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
    IMAP (Incoming Mail Server) information:
    • Server name: imap.mail.me.com
    • SSL Required: Yes
    • Port: 993
    • Username: [email protected] (use your @me.com address from your iCloud account)
    • Password: Your iCloud password
    SMTP (outgoing mail server) information:
    • Server name: smtp.mail.me.com
    • SSL Required: Yes
    • Port: 587
    • SMTP Authentication Required: Yes
    • Username: [email protected] (use your @me.com address from your iCloud account)
    • Password: Your iCloud password

  • Is it possible to not have a disc menu?

    I want to make a dvd in which when you play it just goes straight to the movie without a disc menu...is this possible? If so, how?

    (From fellow poster Mishmumken: )
    How to create a DVD in iDVD without menu (there are several options):
    1. Easy: Drop your iMovie in the autoplay box in iDVD's Map View, then set your autoplay item (your movie) to loop continously. Disadvantage: The DVD plays until you hit stop on the remote
    2. Still easy: If you don't want your (autoplay) movie to loop, you can create a black theme by replacing the background of a static theme with a black background and no content in the dropzone (text needs to be black as well). Disadvantage: The menu is still there and will play after the movie. You don't see it, but your disc keeps spinning in the player.
    3. Still quite easy but takes more time: Export the iMovie to DV tape, and then re-import using One-Step DVD.
    Disadvantage: One-Step DVD creation has been known to be not 100% reliable.
    4. (My preferred method) Easy enough but needs 3rd party software: Roxio Toast lets you burn your iMovie to DVD without menu - just drag the iMovie project to the Toast Window and click burn. Disadvantage: you'll need to spend some extra $$ for the software. In Toast, you just drop the iMovie project on the Window and click Burn.
    5. The "hard way": Postproduction with myDVDedit (freeware)
    Tools necessary: myDVDedit ( http://www.mydvdedit.com )
    • create a disc image of your iDVD project, then double-click to mount it.
    • Extract the VIDEO_TS and AUDIO_TS folders to a location of your choice. select the VIDEO_TS folder and hit Cmd + I to open the Inspector window
    • Set permissions to "read & write" and include all enclosed items; Ignore the warning.
    • Open the VIDEO_TS folder with myDVDedit. You'll find all items enclosed in your DVD in the left hand panel.
    • Select the menu (usually named VTS Menu) and delete it
    • Choose from the menu File > Test with DVD Player to see if your DVD behaves as planned.If it works save and close myDVDedit.
    • Before burning the folders to Video DVD, set permissions back to "read only", then create a disc image burnable with Disc Utility from a VIDEO_TS folder using Laine D. Lee's DVD Imager:
    http://lonestar.utsa.edu/llee/applescript/dvdimager.html
    Our resident expert, Old Toad, also recommends this: there is a 3rd export/share option that give better results.  That's to use the Share ➙ Media Browser menu option.  Then in iDVD go to the Media Browser and drag the movie into iDVD where you want it.
    Hope this helps!

  • Why does the iPod 5 not have a battery perecentage option? can't you guys put it in an update?

    why does the iPod 5 not have a battery perecentage option? can't you guys put it in an update?

    Apple has not said why.
    You can add it by:
    https://www.youtube.com/watch?v=8laNV5pjYao
    Note that % battery on an iPod is not accurate.You will see large fluctuations in % battery with load changes.

  • Does Verizon not have a live chat option for customer service?  or a phone number?   I'm having a heck of a time trying to find how I can contact them

    Does Verizon not have a live chat option for customer service?  or a phone number?   I'm having a heck of a time trying to find how I can contact them

    As taken directly from the VerizonWireless website.
    (and I am not a chat or customer service agent, I just hang around here too much)
    CHAT:  Contact Us | Verizon Wireless
    Customer Service
    (800) 922-0204
    or dial *611 from your mobile phone
    View the *611 On-Screen App for Android Video
    6 AM - 11 PM, Mon - Sun

Maybe you are looking for

  • Creative Cloud Desktop ist uninstallierbar

    Am 19, August hab ich mir ein Creative Cloud Abo zum Geburtstag geschenkt. Seitdem hab ich etwa 20 mal versucht das Hauptelement, den CC-Desktop auf meinem ziemlich neuen Protzer VAIO, downgedradet auf Win7Pro, zu installieren. Aber immer sagt es "ge

  • Variable offset in customer exit

    Hello, I need to calculate the Date based on the user entered the values in the selection criteria 0calmonth.   Say the user entered the calmonth as 05/2008, i need to calculate the date and i can achieve this in customer exit.  But under calmonth va

  • Slow reports giving "An error has occurred: Request timed out" on first run

    I have BO XI R1 SP4 installed on Windows 2003 R2 SP3 with .Net 1.1 installed. Most of our reports are quite large (>60000 rows returned) and will timeout in InfoView when first run and give the message in the subject. When you close the window and re

  • System monitors that embed/integrate Mission Control

    I noticed that Tidal Intersperse integrates Mission Control to assist with low-level monitoring and root cause analysis. Can anyone recommend Intersperse? Does anyone know of any other higher-level monitoring tools (transaction level monitoring, SLA,

  • Programming in OS X

    Hello I have been a PC user for past 8 or 9 years and i've been using Microsoft Visual Basic or Borland Delphi or similar programming languages to make programms for Microsoft Windows OS. Now i've bought my very first Mac and i'm wondering how can i