I do not have any files in my utility folder why???

I was trying to open activity monitor and so I went to my utility folder and there are no files in this folder anymore....?
Anyone know whats the problem?
Thanks

No it will not. Always a good idea to keep a backup though
So to summarize to fix your issue
Inset the Mac OS Install DVD and shut down the computer
Turn on the Computer and hold down the C key
Select English for the main language
Continue the re-install process.
Takes about 35 minutes, it will not erase your HD and it will bring back your utilities when it is done.
Issue Resolved!

Similar Messages

My files did not down load properly do not have two files zip or second folder help

files did not down load properly need help need to build website for class do not have the zip file or second folder new to this

Hi
could you tell, does it gives you any error when you try to download raw files
and i would recommend you do update the camera raw plugin
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.2

After yesterday installing the latest itunes upgrade 11.1.5.5 my CD drive is no longer recognized. I do not have the file afs.sys on my computer which is supposed to cause the problem. Any ideas?

I yesterday installed the latest itunes upgrade to version 11.1.5.5. After doing so my computer no longer recognizes my cd drive Device manager states that windows cannot load the device driver, the device driver may be corrupted or missing. When I have tried to renew the driver it states the latest one is installed. I do not have the file afs.sys on my computer which is quoted as the file which causes optical drives to disappear. Any ideas

Hi, I've managed to get my CD & ipod working now but it wasn't easy. Maybe this will help you fix it.
This is what I did:
The problem: OS Windows 8.1 - was working ok with itunes (not sure which version). Upgraded to 11.1.5.5 and my old ipod stopped being recognised by itunes. As I had just bought a new ipod touch 5G I didn't pay too much attention however I soon realised that the new ipod wasn't recognised either. I uninstalled iTunes & reinstalled but that didn't fix it. I found a technote (see below) that says how to get get your ipod reconised. That worked but on a a reboot I realised that there was no CD drive appearing in windows.
It now works & this is what I did to fix it:
Went through the apple technotes on CD issues & looked a the Gear website
Looked for afs.sys file but didn't have that
The registry settings for device filters looked the same as the technotes
Device manager for CD said there were problems in the registry
I backed up the itunes folder (I was planning on a clean install & rebuilding itunes from scratch however most people want to keep their data)
I uninstalled itunes but that made no difference
I rolled back to the a system restore point that had been created not long before the upgrade to 11.1.5.5
The CD drive was now OK again
I went into Windows update and ran the updates that were available - one was for intel chipsets
I created a system restore point as a precaution
I found the registry key that is mentioned in the technotes to do with CD problems and device filters and backed it up separately as a precaution
I ran itunes (x64) 11.1.5.5
itunes asked me if I wanted to repair or uninstall - I uninstalled
I rebooted
I ran install for itunes 11.1.5.5
itunes installed ok & the CD was still there
ipods were not recognised
I followed the instructions http://support.apple.com/kb/TS1538 to update the driver
5. Verify that the Apple Mobile Device USB Driver is installed - For Windows Vista, Windows 7, and Windows 8
Update the Apple Mobile Device Driver
I now have a CD drive & iTunes recognises my ipod again - phew
Good luck

Resizing a TIFF File: Overwriting TIFFFields does not have any effect

Hi,
I have some TIFF files that I am receiving through a FAX server. Some of the TIFF files have an image length of *1077 pixels and a DPI of 200x98*. These images open fine in generic viewers like Microsoft Image Viewer and IrfanView and the image size in the information dialog shows up fine (1752x2158). But when I open the images in a LeadTools viewer (that works off TIFF Header tags), the image appears stretched out.
I am trying to re-sample the image to make it a true Letter size image (1700x2200) with resolution of 200x200. I have been able to set the TAG_X_RESOLUTION and TAG_Y_RESOLUTION which I can see changed in the Tag Viewer. But changing the following tags does not have any effect on the resulting image:
TAG_IMAGE_WIDTH
TAG_IMAGE_LENGTH
TAG_ROWS_PER_STRIP
the following is the code I am using, I have tried all possible ways (removing TIFFFeilds and then adding them), but it has no effect. The last options is to use a Print Driver from within Java and Print the image (that re-samples it into a 8.5x11 inch image with 200 DPI). At this point, I am just curious about writing TIFFFields with images. Any ideas are appreciated:
Thanks,
Manuj
+
import java.io.BufferedOutputStream;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.util.Iterator;
import javax.imageio.IIOImage;
import javax.imageio.ImageIO;
import javax.imageio.ImageReader;
import javax.imageio.ImageWriter;
import javax.imageio.metadata.IIOMetadata;
import javax.imageio.stream.ImageInputStream;
import javax.imageio.stream.ImageOutputStream;
import org.w3c.dom.NamedNodeMap;
import org.w3c.dom.Node;
import com.sun.media.imageio.plugins.tiff.BaselineTIFFTagSet;
import com.sun.media.imageio.plugins.tiff.TIFFDirectory;
import com.sun.media.imageio.plugins.tiff.TIFFField;
import com.sun.media.imageio.plugins.tiff.TIFFImageWriteParam;
import com.sun.media.imageio.plugins.tiff.TIFFTag;
import com.sun.media.imageioimpl.plugins.tiff.TIFFT6Compressor;
               //set the input stream for to the reader
               tiffFileReader.setInput(tiffFileInputStream);
               //define the writer
               ImageWriter tiffWriter = (ImageWriter) ImageIO.getImageWritersByMIMEType("image/tiff").next();
               //define the writer param with compression;
               TIFFImageWriteParam writeParam = (TIFFImageWriteParam)tiffWriter.getDefaultWriteParam();
               TIFFT6Compressor compressor = new TIFFT6Compressor();
               writeParam.setCompressionMode(TIFFImageWriteParam.MODE_EXPLICIT);
               writeParam.setCompressionType(compressor.getCompressionType());
               writeParam.setTIFFCompressor(compressor);
               writeParam.setCompressionQuality(Float.parseFloat("1"));
// get the metaData
               IIOMetadata imageMetadata = null;
               IIOImage testImage = null;
               for(int i=0;i<filePageCount;i++)
                    imageMetadata = tiffFileReader.getImageMetadata(i);
                    TIFFDirectory dir = TIFFDirectory.createFromMetadata(imageMetadata);
          // Get {X,Y}Resolution tags.
          BaselineTIFFTagSet base = BaselineTIFFTagSet.getInstance();
          TIFFTag tagXRes = base.getTag(BaselineTIFFTagSet.TAG_X_RESOLUTION);
          TIFFTag tagYRes = base.getTag(BaselineTIFFTagSet.TAG_Y_RESOLUTION);
          TIFFTag tagImageWidth = base.getTag(BaselineTIFFTagSet.TAG_IMAGE_WIDTH);
TIFFTag tagImageLength = base.getTag(BaselineTIFFTagSet.TAG_IMAGE_LENGTH);
          TIFFTag tagRowsPerStrip = base.getTag(BaselineTIFFTagSet.TAG_ROWS_PER_STRIP);
          TIFFField fieldRowsPerStrip = new TIFFField(tagRowsPerStrip, TIFFTag.TIFF_SHORT, 1, (Object)new char[]{2200});
          // Create {X,Y}Resolution fields.
          TIFFField fieldXRes = new TIFFField(tagXRes, TIFFTag.TIFF_RATIONAL,1, new long[][] {{200, 1}});
          TIFFField fieldYRes = new TIFFField(tagYRes, TIFFTag.TIFF_RATIONAL,1, new long[][] {{200, 1}});
          // Create Width/Height fields.
          TIFFField fieldImageWidth = new TIFFField(tagImageWidth,TIFFTag.TIFF_SHORT,1, (Object)new char[]{1728});
          TIFFField fieldImageLength = new TIFFField(tagImageLength, TIFFTag.TIFF_SHORT,1, (Object)new char[]{2200});
          //TIFFTag imageLengthTag = fieldImageLength.getTag();
          // Append {X,Y}Resolution fields to directory.
          dir.addTIFFField(fieldXRes);
          dir.addTIFFField(fieldYRes);
          //add Image Length and height parameters
          dir.addTIFFField(fieldImageWidth);
          dir.addTIFFField(fieldImageLength);
          // dir.removeTIFFField(278);
          dir.addTIFFField(fieldRowsPerStrip);
testImage = new IIOImage(tiffFileReader.read(i), null, dir.getAsMetadata());
+
The resulting image with this carries the updated DPI values (200x200) but still carries the old values of 1752x1077, the length being exactly half of what Irfan view is showing.
Edited by: Manuj on Nov 2, 2010 10:48 AM

Your problem for some reason sounds familiar.
EDIT
Ok, now I remember. Your post is like this one in the old forums,
http://forums.sun.com/thread.jspa?forumID=540&threadID=5425983
Basically, for viewing purposes Irfanview scales the image's height by 2 and changes the dpi to *200x196*. It does this to achieve a 'square' pixel. The image that appears on screen now looks roughly how a printer would print it. However, the image data is still the same squished 1752x1077 image.

HT203433 I am having trouble moving my music to my new computer. I have enable homeshare. it does not show any files in my homeshare. How do i get them out of the normal files into home share

I am having trouble moving my music to my new computer. I have enable homeshare. it does not show any files in my homeshare. How do i get them out of the normal files into home share

Welcome to the Apple Community.
The following article(s) may help you.
Moving your iTunes library to a new computer

BDC session created as i excute I have not passed any file name

Hello Guru's
        I have created one BDC
PARAMETERS : readfile LIKE rlgrap-filename DEFAULT
             'c:\textfile.txt' LOWER CASE.
on execute I'm passing a new file name & my BDC works fine.
But in case i execute & do not pass any file name & cancel the same a BDC session is generated with zero values.
How to restrict the same. Please guide.

hi,
make ur field obligatory..
PARAMETERS : readfile LIKE rlgrap-filename DEFAULT
'c:\textfile.txt' LOWER CASE OBLIGATORY.
and make another check.
after uploading the file to internal table, check whether it contains any value...
   IF <tab>[] IS INITIAL.
      MESSAGE 'No Data in FILE.' type 'E'.
      LEAVE LIST-PROCESSING.
   ENDIF.
and if a blank session is generated, go to SM35 and delete that session...
Edited by: Sukriti Saha on Oct 23, 2008 10:39 AM
Edited by: Sukriti Saha on Oct 23, 2008 10:41 AM

Protected mode message comes up and when I try to open files it says it encountered an error and to check online.. i can not open any files now

Within the past week I have been getting messages when trying to open pdf files " that its in protected mode and can not open"
I deleted adobe and reinstalled directly from Adobe.com and now I can not open any file with a message it has encountered an error
and will check online for solution. Please assist as no files will open now
This is details of error
Problem Event Name:    APPCRASH
Application Name:    AcroRd32.exe
Application Version:    11.0.10.32
Application Timestamp:    547e9779
Fault Module Name:    StackHash_147f
Fault Module Version:    0.0.0.0
Fault Module Timestamp:    00000000
Exception Code:    c000041d
Exception Offset:    77a011f1
OS Version:    6.1.7601.2.1.0.256.48
Locale ID:    1033
Additional Information 1:    147f
Additional Information 2:    147ff66574b08dc93180d912e60eb897
Additional Information 3:    c48b
Additional Information 4:    c48be403c52ec6c06778481aaa8948d8
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Can you open Adobe Reader by itself? If so, try to disable Protected Mode [Edit | Preferenes | Security (Enhanced)].

No matter what wi-fi I'm connected to or browser I'm using, webpages take forever to load or they never load at all. Other computers do not have any problems. How can i fix this?

No matter what wi-fi I'm connected to or browser I'm using, webpages take forever to load or they never load at all. Other computers do not have any problems. How can i fix this?
I've tried safari, chrome, firefox...I've cleared the cache as well. This has been going on for several months and used to be tolerable as it was not every website. Now it has become every website and is impossible to deal with. My roommates computer and my cell phone connect fine. I'm fully connected to the router yet websites don't load. I'm using 10.7.5. Thank you!!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Can not attach any files to one of my accounts

Hello
i seem to have problems with attachments. I have 5 e-mail accounts with mail. on 4 of them i can not put attachments. I have to first use the one account which i can add attachment and then change over to the other account
any idea

Ernie
thanks for the reply Here are the answers to your questions.
yes each account has it's own drafts folder. and I can save the file into the drafts folder after follow the steps you outlined in your answer. I did repair permission but nothing has changed .
one thing i discovered is that I can attach files to the mail if i reply to it. only when i create a new mail in one of those accounts can i not attach any files.
Seeing on the side bar that you are a top user I have another question you might be able to answer
my apple help is not working, when i go to finder and go to mac help the page is blank and if i search it just searches and nothing happens

Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why do i need to do some settings for it ?

Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why? do i need to do some pre defined settings to run the cd's and dvd's ?

A .exe file is a Windows executable. OS X does not run Windows programs. If you need to use .exe files then you will need to install Windows on your Mac:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Can not open any files CS5 Win 7 64 bit

I can not open any files in Photoshop. I can open them in Bridge or LR. If I open a file in Camera Raw and try to go to Photoshop, PS opens and just sits there and looks at me as if I opened the program only.

Is this a new installation that has never worked, or is this a problem that has cropped up recently?
In any case, there are two things you can do that between them have a very good chance of getting things working for you.
1. As a diagnostic, click Edit - Preferences - Performance, and uncheck (disable) the [ ] Enable OpenGL Drawing setting, then close and reopen Photoshop. If this corrects the problem, then chances are good that your display driver needs to be updated. To do so, go to the web site of the maker of your video card (e.g., nVidia or ATI) and follow the links to the driver download that matches your hardware and operating system. When you've updated the driver and rebooted your system, re-enable the OpenGL Drawing setting (remembering to close and restart Photoshop) then re-test.
2. Clear all Photoshop preferences to standard defaults. To do this, press and hold the Control, Shift, and Alt keys IMMEDIATELY after cold-starting Photoshop from its shortcut or menu entry. If you're quick enough, it will prompt you. You'll need to go through all the preferences again to ensure any customizations you want are re-done.
Hope this helps!
-Noel

Itunes on W8 will not play any files after upgrade to 11.0.4.4

After following the prompt and updating Itunes on Windows 8 to version 11.0.4.4 on 6 June, Itunes no longer plays any audio or video files from my library. Pick a file and Itunes shows that it is playing (Pause button only) however nothing happens. The file simply does not play. Windows Media Player will not open any files. VLC will play flash video files but with no sound. Video played in IE10 seems to play ok including sound. Anyone have any suggestions. I can uninstall but figure I'll get teh same version when I re-install. Everything worked fine prior to installing this upgrade.

Resolved by running W8 System Restore to a point prior to the last Itunes update. Now back on the previous version of Itunes. Windows Media Player working correctly with all file types. Itunes working correctly also. I'm quite happy not to re-apply any updates from Apple for a while.

Using a dll function that does not have any inputs from a VI

Hello all, I'm very new to Labview, I have wraped a dll library using the LVlib wizard and now I am trying to use it in a project. I have a function that does not take any inputs or return any thing except that a struct is populated with some status information as part of the call. I am able to draw a StartInterface VI because my void startInterface(const char* configFile, struct status_struct* status) takes the location of a configutation file as an input. But I can not figure out how to connect my Call Library Node to my a function vi that does not have any inputs ( void shutdownInterface(struct status_struct* status)).
Note that the status struct is deffined to be only and out put at the creation of the LVLIB.
Thanks, Mike

Thanks for the responses guys:
I think I am aware of the conotations of inputs and outputs when I created the lvlib I specified the argument struct status_struct* status as only an output instead of the default of input and output.
I do not think that I am doing anything as complex as function callbacks. My immediate goal is to have an executable (I have application builder) with two buttons and two three text fields one text field for the input of the config file, two text-fields for a cstring that is contained in the status struct; one button to start the interface and one button to stop the interface.
This is in all likely hood a case of my self being too dense and missing something fundimental ;-) I just can't figure out how to wire the shut down method after I've configured the call library node. See the attached pictures:
Attachments:
Start.jpg ‏7 KB
shurtdown.png ‏9 KB

BizTalk Server 2013 SFTP Adapter with private key - Did not poll any files

Hello,
We have a requirement to connect SFTP secure site with the private key and polling files. Initially I have
tested BizTalk Server 2013 SFTP Adapter receiver Port using Bitvise SSH SFTP Server tool and it was working perfectly in our local network environment( with public private key authentication).
However when we connected to Client SFTP server with private key authentication, It successfully connected to SFTP Server but
did not poll any files from SFTP Site. I added only one file to SFTP Server ( 145 kb file) for testing purpose.
However BizTalk Server 2013 SFTP Send Adapter is working well with the same configuration.
I could not find any errors in Event viewer also. I can download\upload file using WinSCP tool .
So I downloaded nSoftware SFTP Adapter trial version and deployed on server. nSoftware SFTP adapter is also working find
without any issues for Client SFTP Site.
This is the configuration on SFTP Receive Adapter
This is how SFTP Server download folder permission configured. I have got this details using WinSCP tool.
<o:p></o:p>
Appreciate your help on this.<o:p></o:p>
Thanks<o:p></o:p>
PrabathD<o:p></o:p>

BizTalk Adapter for SFTP is where the polling logic is implemented. It is not part of the SFTP Client logic. any SFTP Client is for User Interaction and you do what you want/when you want.
The BizTalk Receive however is for purposes of automation and the adapter polls the receive location using the credentials every polling interval to check for the files matching the filter. When it find a file, it will read and publish to message box or
submit to pipeline for processing. Your setting the polling interval to 0 (ZERO) might actually be disabling the polling.
Set your poll interval to a non-zero value and check the behavior.
Regards.

I can not download any files using Safari ? when I choose to download application file the URL include the file name and stop responding. Any help??

I can not download any files using Safari ? when I choose to download application file the URL include the file name and stop responding. Any help??

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. The Guest login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

I do not have any files in my utility folder why???

Similar Messages

Maybe you are looking for