I do not have the option for hotmail on my iphone

I want to add my hotmail account to my iphone 4 all the directions to do this are saying select hotmail in mail settings but i have no option for this i have yahoo exchange google aol but no hotmail help

Outlook - right below AOL.

Similar Messages

HT4623 i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.

i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.

Identify Your iPad
http://www.ifixit.com/Info/ID-your-iPad
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

Why do I not have the option for my mini bridge in photoshop?

I have a MAC and photoshop CC 2014 and I do not have any option to open mini bridge or even view in mini bridge anywhere in my settings, options or where it should be at the bottom of my photoshop.
Does anyone know where it is or why I don't have it?
Thanks,
Nicole

Thank you. I was finally able to take to tech support too and they tell me it has been removed. Thanks again. I will take a look at the link.

Do not have the option for the universal counting leader in project asset menu

I don't seem to the option for a universal counting leader under the "new item" action, located in my project asset menu on expert view. I am using Premiere Elements 13, on a Mac, version 10.9.5. The others are there -- adjustment layer, title, bars and tone, etc, just not the universal counting leader. Any ideas?
Thanks!

inatgybderstorm
The Universal Counting Leader is there in Premiere Elements 13 Windows 7 64 bit.
I am strictly an Elements Windows user so I am not sure of the history of the Universal Counting Leader in Mac versions.
If you do not find it, it is probably one of the Windows Only features when one compares Windows Mac versions of the program.
Unless a Premiere Elements 13 or earlier Mac user comes forward to confirm one way or the other, I going with this one being a Windows Only for
Premiere Elements 13 and possibly earlier versions as well.
ATR

Why does bios 1.8 not have the option for 1T timing?

I was just wondering why I don't have the option with bios 1.8 in my k8n neo2 platinum to run 1T command rate? I use it with memtest+ and a64tweaker and it works fine.. I just want to turn it on without software..

look around some more on the forum, there have been some BIOS betas released and can be studied about that may help you if you need a fix now... I know were alll eagerly awaiting aBIOS that will enable dual core for Neo 2 plat, at least I am, but then again I don;t KNOW for sure you'll have too do some research

Lync 2013 click to call from Outlook 2013 does not have the option for Lync call

Hello,
We are currently migrating from OCS 2007 r2 to Lync 2013. We are on office 365, but Lync is on premise. After migrating several users the option in Outlook to click to call someone only shows one option, which is to call the person's desk phone. Before there
was a dropdown where you could choose desk phone, mobile or Lync call. This issue isn't happening to everyone. We are using Office 2013 and Office 2010. Please let me know if you have suggestions or if you need more info.
Not sure if this is related, but some people have lost the option to view their contact's pictures.
Thank you in advance,
Mitch

Hi,
Please see the image below, are we talking about this?
If a contact doesn't have a phone number, we surely can't call him.
You can try updating the Offline Address Book to see the result:
http://www.howto-outlook.com/howto/oabupdate.htm
If I got anything wrong, feel free to post back.
Regards,
Melon Chen
TechNet Community Support

HT4527 I am trying to move my library and playlists to a new computer by burning to CD's. However, I followed the directions by going to File and then Library - then they said to go to burn CD(s) - I DO NOT have that option for some reason. How do I do th

I am trying to move my library and playlists to a new computer by burning to CD's. However, I followed the directions by going to File and then Library - then they said to go to burn CD(s) - I DO NOT have that option for some reason. How do I do this? I have done the library sharing thing but I am getting rid of my primary computer and am afraid I will lose the library.

To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
and select the Library that you moved. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
Your first option didn't work because you imported one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
Your second option didn't work because you simply referenced her library on the old machine.
Regards
TD

I am new to FCP. I have a canon 60d camera and purchased fcpX. I was recommended to download mgep streamline and convert my files to prores422. I do not have an option for prores 422 in my download. How can I fix the problem.

I am new to FCP. I have a canon 60d camera and purchased fcpX. I was recommended to download mgep streamline and convert my files to prores422. I do not have an option for prores 422 in my download. How can I fix the problem.Please help. There was another suggestion by vimeo.com to use applexdcam ex 1080p30. I do not have that either in my mpeg download.

For future reference, you will most likely get more knowledgeable answers if you post in the FCP forum where the folks who use the product regularly hang out:
https://discussions.apple.com/community/professional_applications/final_cut_pro_ x

I have a late 2008 white macbook. I have a mini dvi to hdmi adapter, and a hdmi cord. My cannot get my MB to detect an external monitor. Nothing happens when plugged in. Also, my display settings does not have an option for mirroring or arrangment tab

I have a late 2008 white macbook. I have a mini dvi to hdmi adapter, and a hdmi cord. My cannot get my MB to detect an external monitor. Nothing happens when plugged in. Also, my display settings does not have an option for mirroring or arrangment tab

Yeah, I'm having the same exact problem - It seems that the thunderbolt minidisplay port is only able to output the analog VGA signal, not the digital signal to support DVI and HDMI. This is a bug that came up after installing 10.7.1. I bought my macbook air with 10.7 on it, upgraded it to 10.7.1 as soon as I got it, so I have never been able to use hdmi or dvi with my macbook air. This is an extremely frustrating problem for me, I used HDMI on a daily basis with my PC. I have spent many hours at the genius bar running diagnostic tests so Apple can get as much information as possible to create a fix for this problem. I have been emailing tech support for 3 or so weeks now, they keep saying that they are working on a fix and it should be out soon, but 10.7.2 has come and gone and I still have no HDMI functionality with my MacBook Air!

HT5622 I have a new desktop and re-installed my identity from my airtime back up and on the log in page my picture comes up with my usual password hint, but it is not accepting my password and I do not have the option to reset using my apple id - that par

I have a new desktop and re-installed my identity from my airtime back up and on the log in page my picture comes up with my usual password hint, but it is not accepting my password and I do not have the option to reset using my apple id - that particular function is in grey and cannot be clicked on

Depending on what kind of computer you have, you're gonna need to put that backup in the appropriate folder or itunes is not gonna be able to see it for you to use.

I am using SURPLUSMETER :) I am also using Apple Airport Time Capsule as my Router that is connected to my Satellite dish Internet Modem ... Now on the Surplusmeter I have the option for PPP Modem . Ethernet Port , Airport , Network Card ,

I am using SURPLUSMETER I am also using Apple Airport Time Capsule as my Router that is connected to my Satellite dish Internet Modem ... Now on the Surplusmeter I have the option for PPP Modem . Ethernet Port , Airport , Network Card , & Adaptor .
Which one can I use properly to monitor all the wireless Devices in my hous

Actually, none of the options will do what you are looking for it to do. That is because, this application only monitors the traffic from the device it is hosted on. That would also mean that you would have to run a copy on each computer that will access the Internet on your network; note their individual usages, and then, combine them to get an idea of the total usage.
However, if you are only interested in the amount of Wi-Fi traffic that only your computer is seeing, then the "AirPort Network Card" option would be the correct choice.

HT4623 When we go to Settings General, we do not have an option for Software Update...only About and Usage.

When we go to Settings>General, we do not have an option for Software Update...only About and Usage. How do we update the system on our iPad?

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

I want to restore the secret question and I does not have the option of sending e-mail to restore

I want to restore the secret question and I does not have the option of sending e-mail to restore

Go here, find your country and follow the directions to contact Apple for help.
http://support.apple.com/kb/HT5699

In the itunes main screen, i do not have the option to delete songs

in the itunes main screen, i do not have the option to delete songs

Thanks for the help...I should have dug a little further and kept reading...I found the answer. I am using Gmail so all I had to do was go into my Gmail account settings and turn off email archiving. Now the default is delete when I edit or swipe.
Thanks

HT4623 I do not have the option to select software update. How might I resolve this?

I do not have the option to click on "software update" and wish to update to iOS 5.1. How might I resolve this?

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

I do not have the option for hotmail on my iphone

Similar Messages

Maybe you are looking for