I do not like how it works on my new iPad ios6.
I do not like how it works on my new iPad ios6. How do I go back to 5.1.1?
Help please.
There are parts of your recent post that I do not understand, you can try a few things though.
press and hold the home and sleep/wake buttons until the apple logo appears on the screen, and then let go.
settings/general/reset/reset all settings
if the above do not solve your issue then a complet restore may be necessary.
Similar Messages
-
Not understanding how Wifi Works
Good morning all, so I'm not understanding how Wifi works on the 3GS. It seems to behave differently then on the 3G. If I send a video to some one and hit the sleep awake button it never goes through. It seems to only send it if I keep the screen active, and I'm not understanding how keeping wifi on drains the battery if everytime I hit the sleep button it disconnects it. It's kind of annoying, because before you could shoot off an email and it would go right through. I have noticed though that if it's on 3G it does go through. Has any one else noticed this? Thanks!
I notice sometimes when I am connected to WiFi that after I wake up the phone it takes a couple seconds to reconnect to WiFi so it does seem like the phone turns the WiFi off at some point while sleeping or at least goes into some sort of standby maybe. I don't think I have had an issue of it turning off after you hit sleep until it was done sending though. I would think that if the WiFi does turn off while asleep that it would have a sleep time after a certain amount of inactive time and not the second the screen is off.
I'm interested in finding this out as well. I havent had this issue but I do send a lot of large attachments and may need to know this for future reference.
Message was edited by: Ray Golob -
"HAVING NOT LIKE" isn't working
When I wanted to sum the value of all inputted device data except one type I had to put this...
SELECT AttributeName, DateAdd(minute,-5,System.TimeStamp) as WinStartTime, system.TimeStamp as WinEndTime, DeviceId, Avg(Value) as Value, Count(*) as EventCount
FROM input
GROUP BY TumblingWindow(minute, 5), DeviceId, AttributeName
Having 'OK' = CASE
WHEN AttributeName LIKE '%/pir/%' THEN 'PIR'
ELSE 'OK'
END
...instead of simply saying...
SELECT AttributeName, DateAdd(minute,-5,System.TimeStamp) as WinStartTime, system.TimeStamp as WinEndTime, DeviceId, Avg(Value) as Value, Count(*) as EventCount
FROM input
GROUP BY TumblingWindow(minute, 5), DeviceId, AttributeName
Having AttributeName NOT LIKE '%/pir/%'
It accepted the "NOT LIKE" version, but didn't produce any output.
Does anyone understand why NOT LIKE doesn't work in this scenario?
Thanks in advance,
Peter
#PEJL
Got any nice code? If you invest time in coding an elegant, novel or impressive answer on MSDN forums, why not copy it over to
TechNet Wiki, for future generations to benefit from! You'll never get archived again, and
you could win weekly awards!
Have you got what it takes o become this month's
TechNet Technical Guru? Join a long list of well known community big hitters, show your knowledge and prowess in your favoured technologies!Hi Peter,
Could you please try your scenario again? We deployed a service change recently which should support this scenario.
We have a different issue where testing of queries in the browser (without starting a job) does not have this fix yet, that change should be rolled out as soon as it is ready.
Zafar
Zafar Abbas -
How do I connect my new iPad to my iphone4s using my personal hotspot on my iPhone.
It will take my pass word.when you switch your hotspot on your phone you will see a user password - when you switch your laptop on and search for your iphone connect and you will be asked for the user password once you enter it and click connect you will link the two devices and they will work together as long as you have a good signal and good data allowance you shouldn't have any issues
-
Like many others, I got my new IPad 3 and could not sync all of my photos. The highest I got was 1,000 out of 15,000. Today Apple released iTunes 10.6.1.7 that , among other things, said it fixed the sync issue with photos. I excitedly, erased my ipod cache and hit sync. It looked like it was working, but just like before iTunes locked. This time at 2,244 of 15,000. Anybody have an idea of how to fix this?
What's the capacity of your iPad?
iTunes needs up to 3x of the actual size of the files you want to sync during the sync process. And syncing 15.000 photos could cross the size of the available free space on your device.
Don't forget that the pictures are now optimized for the retina display, so the size increases for each of them.
Message was edited by: Ingo2711 -
how can I get my new ipad 4 to read my compact flash cards? If not, can I download the images directly from my camera?
Tom, thanks for your quick reply. I'm a commerical photographer using Canon 5D mk2's mostly and have in the past just downloaded images to a mac book for backup. I really liked the compact size of the Ipad and just got the retina model with the camera connection kit and seem to be hearing that CF readers can't be used with it b/c they draw too much power. Seems like I remember reading I could use a cord that might have come with my cameras to download directly to the Ipad. I haven't tried it yet as I can't find the connection but then you just said it can't be done?
I'm COMPLETLY lost as to your "first pluging in a flash drive to my computer, advice. Do you mean Ipad when you say computer? "then put your movie/photo files into the folder." HOW????????
Then plug it into the Ipad?????? TOTALLY lost.
Also your saying just "do a google search for a reader doesn't work b/c NONE are able to work with the newer Ipads b/c they use TOO much power or so everyone says everyone that have tried.
Hope you can help a little more b/c I'm really getting frustrated with all the conflicting advice!
Thanks, Dennis [email protected] -
How do I sync my new ipad mini with my old ipad 2, without losing any apps or data in notes? I need step by step instructions for first-time sync with ipad mini. Thanks.
If you synced it many times, you have to have a backup. It's just a question of how old that backup is now. When did you last sync?
First of all launch iTunes on your computer and go to Edit>Preferences>Devices. Do you see any backups for you iPad in that window? If so, how new is the newest backup? That will be the backup that you will want to use. But remember that if you use that backup and it is one month old, you can only restore from that date back in time. Anything that you did on the iPad in the past month will not be in that backup.
Turn on the new iPad Minin and start activating OTA via WiFi. You will get to a certain point in the process where you will be given the choice to Set up as new, Restore from iCloud - or Restore from iTunes. You will want to select Restore from iTunes.
That is the short and sweet version. There are step by step instructions in this article. This applies to the mini as well as the iPad 4 or the iPad 3 for that matter.
http://www.everythingicafe.com/how-to-set-up-new-ipad/2012/03/16/ -
I lost my mini iPad in Peru, Machu Pichu area and I do not know how to use the find my iPad ... can you help???? please, before the person that found it unblock and use it
Did you enable the "Find my..." function BEFORE you lost it?
-
Nfl mobile not working on the new ipad
could anyone one tell why nfl mobile is not working on the new ipad with vz data plan
Brigrat and Kevbraah, I know you want to enjoy NFL Mobile from your iPads! I checked the description on the NFL Mobile app from the AppStore, and unfortunately the new iPad is not supported at this time. This may be updated in the future, but not at this time. I apologize for any inconvenience. Here is the link to the description. http://bit.ly/Po3mah
See the "Live video and in-game highlight videos are not available on iPads and the new iPad is not supported."
MarquiaF_VZW
Follow us on Twitter @VZWSupport -
My smart cover is not working with the new iPad
The smart cover for my iPad 2 won't work with the new iPad. I have verified the toggle is enabled in settings. Does anyone have a solution or is experiencing the same issue? Thanks :)
It's the polarity of the magnet in the older Apple Smart Covers (and many third-party cases and covers) that is causing the problem. All you need to know about this situation is detailed at my blog post:
http://markshangout.com/blog/2012/3/17/ipad-3-smart-cover-sleepwake-feature-not- working.html
Mark -
How can I get my new iPad Air to steam Netflix in HD?
When I turn on movie titled "example short 23.976" on Netflix app, it shows that it streams in about 500 kps. But when I stream the same film on my older iPad 3, it shows that it streams 4300 kps. I have comcast internet.
Do you know a fix for this issue?Tom, thanks for your quick reply. I'm a commerical photographer using Canon 5D mk2's mostly and have in the past just downloaded images to a mac book for backup. I really liked the compact size of the Ipad and just got the retina model with the camera connection kit and seem to be hearing that CF readers can't be used with it b/c they draw too much power. Seems like I remember reading I could use a cord that might have come with my cameras to download directly to the Ipad. I haven't tried it yet as I can't find the connection but then you just said it can't be done?
I'm COMPLETLY lost as to your "first pluging in a flash drive to my computer, advice. Do you mean Ipad when you say computer? "then put your movie/photo files into the folder." HOW????????
Then plug it into the Ipad?????? TOTALLY lost.
Also your saying just "do a google search for a reader doesn't work b/c NONE are able to work with the newer Ipads b/c they use TOO much power or so everyone says everyone that have tried.
Hope you can help a little more b/c I'm really getting frustrated with all the conflicting advice!
Thanks, Dennis [email protected] -
Does Smart Cover Work on The New iPad?
Does Smart Cover work on The New iPad?
JeremyI am talking about so-called third party cases like from Zenus, not on apple smart covers. If they happen to have the wrong polarity, you can just trash them. But maybe apple has a deal with them, so that they can sell yet one more. And i guess then they reverse polarity for the next model... Extremely annoying, and, I repeat myself, extremely customer unfriendly product policy.
-
How to display lyrics on new ipad
Want to know how to display lyrics on my new iPad (iOS6 latest)...
All my songs have lyrics attched, but I can not display them when music plays....Lyric display is not currently supported on the iPad Music app.
You might check the app store for some alternative music players that do. -
How do I restore my new Ipad? I forgot the passcode.
How do I restore my new Ipad? I forgot the passcode. I tried to connect it to Itunes, but I had never synced it before. So it says it can not access the Ipad because it is locked by a passcode that I need to unlock it to access it? Uggghh!!
This link should provide the help you need. You are going to have to restore your iPad as a New Device since you never backed it up. You'll then have to download your apps again (you won't be charged as long as you use the same Apple ID you downloaded them from to begin with. You'll have to rebuild your contacts, everything. From now on, make sure you are regularly backing up your device.
http://support.apple.com/kb/ht1212 -
HT4157 how can i verify my new ipad is at&t or verizon
how can i verify my new ipad is at&t or verizon since it is not indicated on the packaging that I can see
go to Settings > General > Cellular > View Account
It'll offer the ability to set up data plan through the respective carrier i believe
Maybe you are looking for
-
How to get the following-sibling nodes until a specific node
XSL people, I need to get all the following-sibling nodes for every <h> node until the next <h> node. Example: <body> <h>Header1</h> <a>Line 11</a> <b>Line 12</b> <c>Line 13</c> <a>Line 14</a> <h>Header2</h> <a>Line 21</a> <c>Line 22</c> <a>Line 23</
-
Problems with iSight on Intel iMac
I've got a very big problem with my iSight, since 2 days. The green light turn on right at booting, just after I push the Power button. Any software (Photo Booth, QuickTime Pro, iMovie) recognize my camera. The iSight isn't mentioned in Apple System
-
I looked at the product for the IPod 30gb 5g the product is called Speck ToughSkin Case for iPod (Black) and im wondering why the shipping is 2-4 weeks.
-
This is second part of a qyestion: I am working on Airbook, how do I delete forward?
-
My 2nd gen iTouch crashed while using an app. All apps disappeared except for 'Game Centre'. When I hooked it up to my iTunes, it shows 2.3G of 'other' content instead of 'app' content. So I can't just re-install the apps. They are still on the touch