I do not see print dialog when I click File Print and thus cannot select a different printer from previous printing.

When I click File Print, no dialog appears. Instead, printing starts immediately so, I don't get to select a printer. At some point in the distant past (with a previous version of Firefox, maybe), the dialog must have appeared I must have chosen the Office Onenote printer. Now, whenever I print a web page, Firefox always uses that printer.
I can change to another printer by editing the config file but, I have to do that every time I want to change printers. That's a bit cumbersome. Is there any way to force the print dialog to open when I click File Print so that I can chose a printer that way?
I am using Firefox 3.6.3 with Windows XP SP3.
Thanks for you help.
== This happened ==
Every time Firefox opened
== I don't recall exactly.

I was having this issue, first when trying to "Run" and then after saving the exe and trying from the desktop.
To solve it, I simply right-clicked the exe and clicked Run As Administrator. Its installing as I type.

Similar Messages

I am trying to share 3 iCloud calendars, but I do not see any options when I click on the Share icon.

I have several calendars on my iCloud, and I want to share 3 of them with my wife. I am using Safari 6.0 on Mountain Lion (10.8), and when I go to my calendars on iCloud, I see all of the calendars listed in the left column. The three I want to share already have an active Share icon (green), although I do not recall sharing these calendars in the past.
When I click on the Share icon beside each Calendar, it shows that the calendar is shared with myself. There is NO OPTION in this window for unsharing, or adding my wife to the share, or making them a Public or Private Calendar. The only option is a check box that allows me to decide whether to receive emails alerts when something is changed.
I currently see all of my iCloud Calendars on my iPhone, iPad, and Mac Powerbook (running Mountain Lion). I share them with no one else. I have three Calendars that I do not want to share, and they have the options described in the Online Support, but the three I want to share with her give me NO OPTIONS.

I should clarify that I am using a MacBook Pro, not Powerbook (if that's the proper nomenclature).

DW CS3 does not display confirmation dialog when checking out file

We have 3 developers set up with DW CS3 Version 9 build 3481.
When checking out a file that is already checked out one pc will
display a dialog box to confirm that you want to check-out the file
as it is already checked out by someone else. This is good as we
want this dialog to appear. However on the other 2 pc's there is no
dialog box displayed and the checkout process continues as if the
file was never checked out.
The text of the confirmation dialog box reads as such :
"index.cfm is checked out by first.lastname. Are you sure you want
to override his/her checkout?". I have been through the preferences
and verified that we have setup the sites in the same manner but we
still have this issue.
Is there a known bug regarding this feature? Is there a
preference setting somewhere that I have missed?
thanks

Are each of your developers sharing the same local site?
That's why you are
getting this error if they are. The proper setup would
involve THREE
locations:
1. Local sites (unique to each workstation)
2. Staging server (shared by all workstations)
3. Production server (the live site)
You would have TWO site definitions, which would be -
(for each workstation)
1. Local = #1 (unique location for each workstation)
2. Remote = #2
(for one MASTER workstation)
1. Local = #2
2. Remote = #3
Use the first site definition for day-to-day work and
checking files in/out.
Use the second site definition ONLY for pushing files from
the staging
server to the production server.
That's the only way it will work....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"bemor" <[email protected]> wrote in message
news:g3ojq5$4il$[email protected]..
> We have 3 developers set up with DW CS3 Version 9 build
3481. When
> checking
> out a file that is already checked out one pc will
display a dialog box to
> confirm that you want to check-out the file as it is
already checked out
> by
> someone else. This is good as we want this dialog to
appear. However on
> the
> other 2 pc's there is no dialog box displayed and the
checkout process
> continues as if the file was never checked out.
>
> The text of the confirmation dialog box reads as such :
"index.cfm is
> checked
> out by first.lastname. Are you sure you want to override
his/her
> checkout?". I
> have been through the preferences and verified that we
have setup the
> sites in
> the same manner but we still have this issue.
>
> Is there a known bug regarding this feature? Is there a
preference
> setting
> somewhere that I have missed?
>
> thanks
>

HT1277 How do I deselect 'automatically setup account' I do not see this option when clicking "Add account'?

I am trying to manually set up my email accounts using mail app on my imac. Mail wont find my exchange account automatically and I want to add them manually. How do I deselect 'Automatically set up mail'? I do not see this option when I click "add account'?

try mail help, there are a number of links there, as well as info on account set up. I have to run, so that's all I can check now.
Good
luck

Stand alone region not seeing AM definition when added to seeded page...

I have created a stand alone region of type stackLayout that contains a messageLOVInput and a table for employee selection and forwarding to predefined pages. I then created a test page in JDeveloper where I added a FlexLayout region and extended my stackLayout region. This works as desired.
I then wished to test my stand alone region by adding it via personalization to a seeded page. I first copied the files to the appropriate directory in $JAVA_TOP into my custom directory. Then I loadd into the MDS, then bounced apache and OC4J. The controls renders as desired. However clicking upon the messageLOVInput in my stand alone region it opens a window and I get "Cannot find LOV in ... AM". Looking at the About this page link, I see that it is not recognizing my AM even though when I added the item via personalization (SITE LEVEL) I specified it. What am I missing here? This should be reusable functionality that can be added to any page, seeded or custom. But for whatever reason it fails to see my AM and thus cannot find the LOV. I know I didn't get the AM reference wrong during the personalization because it would throw an error if I had (ask me how I know this).
Has anyone ever done this before?

Hi,
If your issue is resolved, you can close the thread so that it can be helpful for others :)
--Sushant

We have one iPhone3s w the lates ios6. have selected iCloud backup for photos but do not see any photos when I log on to iCloud

we have one iPhone3gs w the lates ios6. have selected iCloud backup for photos but do not see any photos when I log on to iCloud. How can I get all my photos from the iPhone3GS to iCloud?

You can't see inside a backup file on icloud, thus you can't view your photos at icloud.com.

HT201413 Why does iTunes not see my iPod when connected?

My computer does not see my ipod when I connect it to it. Nor does it come up in iTunes. How can I sync my music with this problem going on?

Try one or more of the following:
> Restart your computer
> Uninstall & Reinstall iTunes
> Reset iDevice Settings (will not delete everything)
> Go to My Computer (Windows XP) or Computer (Windows Vista & 7) and see if your iDevice shows (should show as a digital camera)
> Restore iDevice completely (will delete everything)
> Make sure both iTunes and iOS firmware is Up-To-Date
iPod Classic driver not recognized in Windows 7. Tried to "troubleshoot," message says "Not Fixed." No recommendations - Microsoft Answers
iPod not recognized in 'My Computer' and in iTunes for Windows
Hope this helps.

I can AirPrint from my ipad but my iPhone does not see printer ? Connected to same network. Is there some setting on the phone I'm overlooking?

I can AirPrint from my ipad but my iPhone does not see printer ? Connected to same network. Is there some setting on the phone I'm overlooking?

Answered this question with a reply from "how does an iphone forget a network" response

I told my wireless network to forget two airport expresses so that I could rename them. Now the network does not see them even when plugged in about 10 feet away from the airport extreme base station. Does "forget" mean forever? How to reset?

I told my wireless network to forget two airport expresses 1 1st gen, 1 2nd gen so that I could rename them. Now the network does not see them even when plugged in about 10 feet away from the airport extreme base station. The network does recognize a totally new 2nd gen express. Does "forget" mean forever? How to reset?

The network does recognize a totally new 2nd gen express.
Then, it sounds like you have already reset the 2nd Gen Express, and now you need to set it up again, like you did the first time. Only, this time, assign the device name that you want to the AirPort Express.
Do NOT use the name that Apple suggests.....which will be something goofy like........Sueswimsf's Red Apple AirPort Express
Assign a simple name.....something like 2ndGenExpress

TS3992 "This iPad hasn't been backed up in 2 weeks. Backups happen when this iPad is plugged in, locked, and connected to Wi-Fi." What do I do if I see this message and it will not go away even when I click OK? I cannot access my Ipad because of this wind

I am having problems accessing my Ipad because this pop up window will not go away even when I click OK. Any ideas?

Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

I cannot pull up pictures from iphoto. I see them but when I click on them, I get an exclamation mark inside a triangle

I cannot open pictures from iphoto. I see them but when I click on them, I get this exclamation point inside a triangle

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
What version of iPhoto? Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

I have a ! before most of the tracks in my library, they were not there before. When I click on the ! it says 'could not be used because the original file could not be found. Would you like to locate it?

I have a ! before most of the tracks in my library, they were not there before. When I click on the ! it says 'could not be used because the original file could not be found. Would you like to locate it?

Also see here for more help and information: iTunes: Finding lost media and downloads
B-rock

After Photoshop Elements quit working for the second time in three months, I uninstalled it and now cannot get it to reinstall from the disc. Nothing happens when I insert the disc. All I can do is look at the folders and files and see nothing that tells

After Photoshop Elements quit working for the second time in three months, I uninstalled it and now cannot get it to reinstall from the disc. Nothing happens when I insert the disc. All I can do is look at the folders and files and see nothing that tells me how to start the installation. Clicking "open with Auto play" gives me irrelevant options, view photos, share, etc. I'm running Windows 8. This program has worked, although buggy, for the past year.

reinstall by clicking setup on your disk or downloading and installing,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I own the iphone 4 and i was using safari and went to google something and my phone froze. My computer is not recognizing my phone when I plug it in, and my charger is not allowing my phone to charge. What can i do to get my phone unfrozen?

I own the iphone 4 and i was using safari and went to google something and my phone froze. My computer is not recognizing my phone when I plug it in, and my charger is not allowing my phone to charge. What can i do to get my phone unfrozen?

Try resetting it: hold the on/off and home buttons 10-20 seconds until you see the Apple logo (ignoring the off slider that appears first), then release. If it won't reset you may need to put it in recovery mode and restore it as described here: http://support.apple.com/kb/ht1808.

HT2905 When I click File, I don't see Display exact duplicates. Help!?

I tried following the instructions in the Apple support forum for removing duplicates in iTunes, but I got stuck very quickly. When I click File, I do not see the option of displaying exact duplicates, which is what the Apple fourm suggests. Advice welcome.

Thanks Kappy. I had just found it but thanks reply. Next question is: Is there a quick way to then delete the duplicates without having to select each one and delete?

I do not see print dialog when I click File Print and thus cannot select a different printer from previous printing.

Similar Messages

Maybe you are looking for