I do not see the LAN adapter and Wifi adapter in Control Panel Network Connections. Why?
Hi,
I am unable to connect to any network. When I started digging in, I reached to Control Panel > Network Connections. There I don't find any icons related to LAN connection or Wireless connection. Why could this be happening? How to investigate it further?
Your scenario #1 is a correct configuration and should work. It seems as though your Extreme is not acting as a router as I believe you intend.
Most likely, you need to reset your modem. Power it down and let it rest for a few moments. Some need longer than others. Then, I recommend you "hard reset" your Extreme (see below) and configure it again, after the modem has been reset. From then on do not change what is connected to your modem without powering it down first.
Once configured, confirm your Extreme's wireless network works as expected and that your iPad and every other wireless device can load web pages. Then, connect the printer directly to one of the Extreme's LAN ports and confirm that it works as well. After that it should work equally well with a switch between it and the Extreme, as should every other wired device connected to the switch. This assumes your switch is an unmanaged device requiring no specific configuration.
Scenario #2: Having a router connected downstream of another is not a normal configuration, so don't pursue that as a solution. It will only distract you from determining the problem. If you want to repurpose Router X as another device do so only after everything else is working to your satisfaction.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.
Similar Messages
-
I have installed my Airport Extreme and have conencted it directly to a modem. WIFI works fine. However I do not see my LAN network (printer. NAS,..).
Analysis:
Scen#1: When I connect the LAN port of the Airport Extreme to a switch (as input) and connect the other LAN devices also to the switch, those LAN devices do not have access to the internet. Also connecting the iPAD with WIFI to the Airport Extreme I cannot find my LAN printer and other devices.
Scen#2: When I connect the LAN port of the Airport Extreme to a router X (as input) and connect the router X to the same switch, and the LAN devices to the switch, those LAN devices do have access to the internet. Also connecting the iPAD with WIFI to the router X I can find my LAN printer and other devices in the LAN network.
Question what has impacted the behaviour of the Airport Extreme, not to detect the devices in the LAN network. Why is the use of a switch directly behind the Airport Extreme not working (no internet access for the other devices and Airport Extreme is not the basis station for the LAN network)?Your scenario #1 is a correct configuration and should work. It seems as though your Extreme is not acting as a router as I believe you intend.
Most likely, you need to reset your modem. Power it down and let it rest for a few moments. Some need longer than others. Then, I recommend you "hard reset" your Extreme (see below) and configure it again, after the modem has been reset. From then on do not change what is connected to your modem without powering it down first.
Once configured, confirm your Extreme's wireless network works as expected and that your iPad and every other wireless device can load web pages. Then, connect the printer directly to one of the Extreme's LAN ports and confirm that it works as well. After that it should work equally well with a switch between it and the Extreme, as should every other wired device connected to the switch. This assumes your switch is an unmanaged device requiring no specific configuration.
Scenario #2: Having a router connected downstream of another is not a normal configuration, so don't pursue that as a solution. It will only distract you from determining the problem. If you want to repurpose Router X as another device do so only after everything else is working to your satisfaction.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility. -
Why can i not see the time line and canvas? Also, why am i not able to click on them either?
I am not able to see the time line and canvas in the motion 5. Also i am not able to click on it either
Try selecting 'revert to original layout' in the window menu. If that doesn't help I would delete Motion preferences in ~/library/preferences/com.apple.motionapp.plist and com.apple.motionapp.LSSharedFileList.plist. You can also try deleting the layouts folder in ~/Library/Application Support//Motion. I assume that at some earlier time Motion was behaving properly. If this problem has occured when you first tried to open it after downloading then I'd reinstall it.
-
I'm not seeing the Auto Save and Versions features
I have a document open in Pages '09 and I'm running Lion, but I am not seeing the auto save or versions features that you supposedly get my clicking on the document name. Can someone help? Do I have to turn this feature on in preferences?
I'm actually working on a Word document that Pages has converted and opened, but the document does have a title bar name. So..I have to do a manual save before auto save will start working?!?
You don't have to do a manual save. Pages will auto save the converted Word document. If you quit Pages after editing the converted document without saving, Pages will reopen the converted Word document, give it a temporary window title of "Untitiled" and have saved your edits.
I did think I see a preference setting for auto save that wasn't checked in my preferences.
I don't think Pages every had auto save. Word does though, and this may be what you're remembering.
Also, how does all this auto save and versions stuff work…
Have a read of Apple's support document titled OS X Lion: About Auto Save and Versions. This explains both and how the two features are related but different.
NB While Pages auto saves new, untitled documents it doesn't create a Version of these documents. -
what happend to the confetti and the water droplet transitions? I can't find them in the 09 version of keynote?
Try:
"Preferences", "General", and select "Animations: Include obsolete animations in choices".
I hope that does it! -
PP does not see my yeti USB mic even though System control panel does??
Not sure why this is not working..
Thanks
JohnThis is not unexpected. USB audio is iffy.
Use a normal mic plugged into the Mic input on your rig. -
My Computer is on BUT I can not see the screen to dark?
My computer is on and I can the my front screen. BUT it is too dark , so I can't see what to do. I was having trouble and I had to reset the PRAM. Is this why I can not see the screen. And how do I fix it?
JeanneI believe the keys on an imac are F11 and F12, for dark / bright respectively.
Try that, I think it'll work.
If not, then try out all the "F" keys, one of them will work.
Ben -
How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated.How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated. -
I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.
Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?
-
I bought rango and i can not see the movie in my account anymore
i had 3 movies on my account I redeem them but now I only see 2 of them how can I see the other one, I just change my laptop
If your country allows you to re download past Movies (Not all do) then go to iTunes Store, Click on the Purchased link from under the Quick Links section on the right. Navigate tto the Movie Section, find your fil and click on the cloud icon to download at no extra cost.
If you do not see the Movie Option then Re-Downloading is not allowed in your country by the Content owners so Apple can not show it -
in Firefox can not see the Downloads window, in the jump in the boot to be seen - the download speed
Downloaded much and now can not see how to fix it?I hate the new downloads-in-a-tab scheme. This was an unnecessary change in my book (if it aint broke, don't "fix it").
So in order to get it back, I performed the about:config browser.download.useToolkitUI change, but now all I get is a blank download window that pops up every time I download something.
Is there something else that I need to do? I've checked the change and it was saved, but it didn't resolve my issue as much as it just caused me a new issue. -
I have rented a movie on apple tv and wish to finish it on my mac book air. When I open iTunes on my mac book air I can not see the movie in iTunes. It is an authorised device and I can see other purchases just. How do I fix it?
Rented movies downloaded to an Apple TV can't be transferred to any other device.
(86941) -
I have just downloaded a trial version of Photoshop Elements onto my Mac Book Pro (10.9.4). The installation to my hard drive went fine so I attempted to use Elements on an existing Photoshop file. I did not see the Elements option in my filter menu and am uncertain as to how to "add" the Elemnts to my existing filter choices. Please advise.
I'm sorry but it's very hard to understand what you mean. What filter menu? In which program? Do you mean you're trying to use PSE as an external editor with some other asset management program? Which one?
-
My movies and music videos won't show up on my computer screen, I can hear the sound but not see the video how do I fix this? I'm not sure what to do as far as turning my purchased movie into DVD goes either. I just want to put the movie onto a DVD disc but my itunes won't even show that I have a blank disc in the drive, I'm not sure what is wrong or how to fix this, any help at all would be much appreciated.
Hi @anthony7722 ,
Thank you for your query, I will do my best to help!
I grasp that you uninstalled the Intel graphic driver and the catalyst control. You reinstalled the Intel driver and now you can view and hear videos on the Internet but you are unable to set the resolution as high as previously.
When I checked the specifications for your notebook I see that you have switchable graphics.
Here are two links that I believe will help.
Overview of Switchable Graphics or Dual GPUs
Switchable Graphics on Notebooks Configured with Intel and ATI GPUs
Here is a link to HP Pavilion dv7-6150eb Entertainment Notebook PC Drivers
Please try this process.
1. Download the chipset driver, and both graphic drivers and save them but do not install them yet
2, Delete the chipset driver and install the updated one.
3. restart your notebook
4.Delete the Intel driver and install the updated one
5. restart your notebook
6. Delete the AMD driver and install the updated driver.
You should now have a Catalyst Control Center.
This should now allow you to use the higher graphic card which should support the higher resolution.
I hope this helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
hi...m using a mac pro quad core.....its not booting up...i can only see the apple logo and a circle loading...could not get into the login screen...any suggestions please.....m in the middle of a project and now i have got this one
regards,
v.s.bharanWelcome to Apple Discussions!
Do you keep your data backed up?
If not, you should always do so*:
http://www.macmaps.com/backup.html
You never know when a hard drive or a directory might go bad. Having a bootable clone is a must.
That link also shows you some tools you can use to recover data.
If you aren't backed up, try buying those tools first, before attempting to repair the directory.
Directory issues can be fixed with these tools*:
http://www.macmaps.com/directoryfaq.html
Maybe you are looking for
-
While my father was uninstalling firefox 6 he did not realize that he and my mother were logged in as users and had the application open. Firefox 6 uninstalled properly but left behind firefox 4 that will not uninstall. We have defrag the computer to
-
I need to disable Ctrl-Alt-Del from a lV 5.1.1 vi under win2k
Thanks
-
NLS_LANG with Instant Client and MS Access
Hello Everybody. Recently I downloaded Oracle Instant Client 10.1.0.3. I made a custom instalation for my little Access (ODBC)application. In the begining the installation had not any other configuration than PATH Environment variable and ODBC basic
-
APEX Web Service parsing error
Hello APEX is creating an incorrect item for parameters on my web service below. Instead of creating two items of names "name" PARM_TYPE xsd:string and "stringValue" PARM_TYPE xsd:string it is creating a single input item called namestringValue P
-
Duplicates should be eliminate in an LOV
Hi, I have a requirement in that,i created a Multi-Record block in the form.In the Multi-record block,say for a field name "Plot No" i have attached a LOV to display the List of Plot Nos.My requirement is that,If you insert a Plot No in one record th