I do not take time to match data with the PC time

Hi
I have a question and do not know why I did not coincide with the time that stores a data graph with the time at which the data is stored on the PC should be every 0.5s and there values are 0 almost, 46s between data and information.
Attached is a picture and -vi.
By the way why do not load the stage number and always reads 0?
  Thanks for your help.
Attachments:
Ejemplo guardado tabla.vi ‏73 KB

Hi Vltan.
I modified my vi.la simulation signal at 10 Hz and period 0.1s.
Where I have the problem is that when the pc was not increased in 0.1s.When the while loop period is 0.1s.
You can modify my vi.
Attachments:
Ejemplo guardado tabla II.vi ‏73 KB

Similar Messages

  • Is it possible to view/compare two Time Machine desktop dates at the same time?

    I accidentally lost a file on my desktop, inadvertently dragging it onto my browser. I don't know what file I lost, and would like to retrieve it through my Time Machine.  I don't want to replace all of the files on my desktop, but I would like to compare the files from two different dates (current date and last time saved) to discover the file I lost. If there's an easier way to make this discovery, I'm open for suggestions. Otherwise, I wonder if there's a way to see or compare my current   files on desktop vs. my last save to Time Machine (without printing out a list).
    Thanks in advance for your help!

    Hey apple_peeler,
    Thanks for using Apple Support Communities.
    It sounds like you want to find out what is now missing by comparing it with other backups. The Restoring data from Time Machine backups section explains how you can do that.
    Mac Basics: Time Machine backs up your Mac
    http://support.apple.com/kb/HT1427
    You can use the timeline on the right side of the window to reach a certain point back in time. The timeline shows the times of all backups on your backup drive. If you don’t know exactly when you deleted or changed a file, you can use the back arrow to let Time Machine automatically travel through time to show you when that folder last changed.
    Have a nice day,
    Mario

  • AddOnsLocalRegistration.sbo file does not match data in the common datab...

    We are receiving the following error everytime we logon our pc for the first time: Add-On Outlook_Integration: This Add-on cannot be upgraded. AddOnsLocalRegistration.sbo file does not match data in the common database for this add-on. See SAP Note 1323680 for more information.
    A few months ago, SBO Server was moved from one server to a new virtual server, but we had no problems with the addons. The other day, we upgraded from SBO 2007 to 8.8 and now we are having problems with the Outlook Integration.
    I have followed the directions in the message noted above, and did find the AddOnsLocalRegistration.sbo file in some odd places, with a reference to the old server. I cleaned this up, on the server and the client and I can get it running...however, after the user shuts down the pc and logs back in the next day, the problem is back.
    In the process of cleaning this up (un-registering the addon and removing the addon references in the local .sbo file) I noticed at times that we would still receive this error, when there really shouldn't be an reference to it.
    Thanks for any help.

    Hi Vaughn.........
    I guess you need a re installation of Outlook Integration Addon.
    Whatever version addon of OI you installed just uninstall it and Install it freshly from 8.8 setup package......
    Regards,
    Rahul

  • How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interrupti​on.

    I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
    So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
    Thank you in advance.
    Regards,
    Attachments:
    HP8563E_Query_Amplitude.vi ‏37 KB

    Hi,
    Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
    So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
    I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
    So I want to acquire 1 time amplitude from spectrum analyser each 5
    period of the signal that I am acquiring from parallel port.
    So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
    Here is a new algorithm.
    1) i=0 (counter: number of period)
    2) I read value from In Port
    3) If I acquire a period
    i= i+1 (another period)
    4) If i is multiple of 5 (If I read 5 period)
    acquire 1 time amplitude and write to the same
    file this amplitude and the corresponding distance
    Distance = 12*i). Remember each period of signal
    Corresponds to 12 Inches).i has to take these
    values: 5,10,15,20,25,35,40,45,50,55,60............
    5) Back to 2 if not stop.
    Thank you very much for helping me.
    Regards,
    Attachments:
    Acquire_Amplitude_00.vi ‏59 KB
    Figure_Algorithm.doc ‏26 KB

  • Problem while refreshing the data for the second time using excel services in sharepoint 2013...

    Hi,
    I have migrated my Sharepoint from 2010 to 2013.I am able to get the data at the first time of refresh when I click on refresh for the second time I am getting the empty the sheet.
    below find the flow of refresh
    First Refresh
    On Click of refresh open the workbook with excel services and return the session id.
    Using that session I am invoking RefrehAsync method of excel services
    After refresh completed I am setting the calculation of workbook as automatic(to calculate the formulas) using the same session id
    After setting the calculation as Automatic I am setting the calculation type as full(recalculate) using the same session id.
    Now I am able to see the data
    Second Refresh
    After clicking on refresh instead of opening the workbook I am using the session id(already opened workbook) and setting the calculation type as manual
    I am following the same process from refresh(RefreshAsync) as I have followed in first refresh.
    This time my formulas are not getting calculated because of that I am not able to see the data.
    Could you please let me know that am I missing anything here?
    Is this know issue in Sharepoint2013 excel services as same code is working fine with Sharepoint2010.
    If I close the workbook(session id null) and opens(new session id) for all the refreshes it is working and I am able to see the data.
    Thanks,
    Meenakshi Nagpal
    N.Meenakshi

    I am able to see the data for the second refresh  if I change the data source.If I use the same data source which is used in the first refresh I am not getting the data.Excel services will contact the cubes and calculate the formulas in my workbook.
    Could you please let me know what could be the problem at second refresh while contacting the same data source with same session id?
    Please help me asap.
    Thanks,
    Meenakshi Nagpal
    N.Meenakshi

  • Can we use the AdventureWorks2008R2 data for the real time project.

    Hi,
    In our project we are trying to do the data scrambling on First name, last name and middle name...
    In the regular practice we use to update the names as
    First Name = FN+<PERSON_SNO>
    Last Name = LN+<PERSON_SNO>
    Middle Name = MN+<PERSON_SNO>
    The Problem is the names are not looking realistic, so I thought of applying some logic and updating our PERSON table names based on Person.Person table in adventure works.
    My question is can we use the AdventureWorks2008R2 data for the real time project. Is there any cop right issue.
    Someone please help me solve this issue.
    Thanks
    Karthikeyan Jothi.

    Please read this link content:
    Adventure Works Sample Site
    sqldevelop.wordpress.com

  • How long does it take to connect to Wi-Fi the first time I use my Ipad? It's been over 30 minutes. I see that it wants to connect but it keeps on turning.

    How long does it take to connect to Wi-Fi the first time I use my Ipad? It's been over 30 minutes. I see that it wants to connect but it keeps on turning.

    It should not take very long. Up to thirty seconds tops depending on your Wi-Fi network.
    Try rebooting your Wi-Fi router. Turn off the router for 30 seconds then turn it back on. After the router completes its startup routine and indicates a good connection to the internet start you iPad again and see if it will connect.
    If you still have problems you might try connecting to a different Wi-Fi network. Maybe one at your local coffee shop or library.

  • What is the easiest way to get time stamped wvm data with AI samp Ch Vi?

    The AI sample channel VI only outputs single point waveform data which is making it a beast for me to get my input data into XY graphs. I have been trying to combine the data with a elapsed time clcok so I can synchronize all my inputs but it isnt working too great. All this stuff is in a while loop also, so that gives me trouble. Basically I just want to make an XY graph from both AI inputs.
    Attachments:
    PID_Control_LoopII.vi ‏326 KB

    Tim, no problem. I have attached the modified code that displays the readings from both devices on the same plot. I used a chart instead of an XY graph since it is much easier to use (it keeps track of elapsed time for you if you know the amount of time in between data points - and since the loop time is fixed we do know that). If this time were to change, then we would have to re-create the X-axis (time) and the XY graph would be necessary. One other note - the code that reads the values from the DAQ cards will not execute at exactly the same time, therefore the data will not be acquired at exactly the same time, though it will be close. Therefore, if your application requires these readings to be dead on together in time down to the mi
    crosecond for example, then you would have to synch the two devices via hardware. Let me know if you intend to do that and I can steer you in the right direction. Hope this helps.
    Attachments:
    PID_Control_LoopII_rev_2.vi ‏89 KB

  • Reading data from the Real-Time Infocube

    Hi,
        I am using the FM RSDRI_INFOPROV_READ_RFC to read the data from the Real time Infocube..
    But it reads only the Closed request. Is there anyway to read the open request data from real-time infocube via program.
    Please suggest.
    Regards,
    Meiy

    Hi,
    I would assume that the function module can read the data only if its available for reporting.
    May be you can try the following: You can close the request during the function module execution time and then reopen it. Not sure if this is possible.
    Bye
    Dinesh

  • HT4859 How long should it take to back up iphone for the first time with about 6 gigs?

    How long should it take to back up iphone for the first time with about 6 gigs?

    Welcome to the Apple Community.
    The first back up to iCloud may take some considerable time. Just how long isn't really possible to say without knowing how much is in your back up and your connection speed.
    What many people don't realise is that upload speeds are often significantly less than download speeds, so for example a user may have a download speed of 40 Mbps, but only 1 Mbps for uploading. As a rough guide it will take around 2 ¼ hours to upload 1 GB of data at 1 Mbps.

  • IMac 10.5.8 ... Time machine died. Bought new Time Capsule2TB. Ordered 10.6 ... Not recommended to install 10.6 w/o prebackup ... Current utility for airport won't do with the new Time Capsule. ... What to do?

    iMac 10.5.8 ... Time machine died. Bought new Time Capsule2TB. Ordered 10.6 ... Not recommended to install 10.6 w/o prebackup ... Current utility for airport won't do with the new Time Capsule. ... What to do?

    You are in the typical catch22.. you cannot use the TC without setting it up.. you cannot set it up without Lion.. so you can install the latest utility.
    Do you have any reasonably current iOS devices.. they can run the iOS version of the utility.. that will allow you to set up the TC.
    Or invite a friend with a laptop running at least Lion
    Or take the TC back and get a plain USB hard drive and backup to that.

  • Remote and direct update of master data at the same time

    Hello
    Is it possible to do remote and direct update of master data at the same time? If yes where it could be used?
    Thanks

    Hi,
    What do you mean by Remote Update ?
    regards
    Happy Tony

  • I can not establish more then 1 call at the same time

    Hi,
    I have SPA9000 with four active accounts. I can not establish more then 1 call at the same time. Accounts are all in registered state. The field in SIP tab, Default Group Line:, is by default: 1,2,3,4 which means if line 1 is busy try the next one in the order ( in this case number 2). But this is not happening. It always tries to dial out with the first line (account). There is no problem with the provider and I don't want to specify groups of userID's and to assign them special line for dialing out.( by the way in this way it is possible to establish more parallel calls, but then each user will always have to dial thru specific line only). Please help me to find out if the SPA is faulty or give me some workaround, so that when I try to make a call , if one line is busy to dial out thru the next available.
    P.S. I suspect that SPA9000 does not notice when the line is busy or not. Maybe there is some issue with the Control Timer Values (sec) on Regional tab.
    Thanks,

    no it can only be one person at a time

  • HT201359 Why the ISTORE of Malta is not up to date with the latest movies and series like the UK & USA and why old movies are being uploaded .

    Why the ISTORE of Malta is not up to date with the latest movies and series like the UK &amp; USA and why old movies are being uploaded .
    I believe the apple should be universal in all the products and a small island like Malts should have the same products for sale on ISTORE like of the UK and USA.

    The iTunes and App stores are inherently different in different countries.  Local laws on copyright and other limits on the distribution of intellectual property make it impossible for Apple to simply put everything in every store.  Sometimes, the owner of the intellectual property does not allow it to be distributed everywhere.  Keep in mind that Apple does not own the music, books, movies and such that they allow for sale in their store front, so they do not necessarily have any say in what may, or may not appear in what store.

  • I have an ipad, when I watch a video the audio does not match up with the video, how can I fix this?

    I have an ipad and when I watch a video the audio does not match up with the video, how can I fix this?

    Hello there, graciecloyd.
    The following Knowledge Base article offers a few steps to try when an application is not functioning as expected:
    iOS: Understanding multitasking
    http://support.apple.com/kb/ht4211
    If an app doesn't respond to your input, or doesn't perform as expected, do the following, testing after each step:
    Check for app updates.
    Force the app to close.
    Restart your device.
    Update your iOS device.
    Learn more about troubleshooting apps.
    On Step 2, close all applicaitons that are open. On Step 3, if the restart doesn't help resolve the issue, you may also want to try the Reset step in that article as well.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for