I do not use my program much. It will not exit, it stays on the screen.

Anyone out there who will help. Is Adobe pulling a fast one?
I've tried all I know, I going to shut it down via the off button and try again.
HP

Try these:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Delete_the_Editor%E2%80%99 s
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#Delete_the_Organizers_prefe rences

Similar Messages

Dear Sirs,when i use the computer updating my iphone to ios 7.1,suddenly black out.The computer has no power and my iphone does not work and keep display the screen that connect to itunes. so when i connect my iphone to iTunes, it says"itunes has detected

Dear Sirs,when i use the computer updating my iphone to ios 7.1,suddenly black out.The computer has no power and my iphone does not work and keep display the screen saying the iphone need to connect to itunes. So when i connect my iphone to iTunes, the computer says"itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes"
So my question is if I click OK(restore the iphone),will i lose all my data and whatsapp??
Thank you for your help and time.
Regards,
hopeless

If you didn't back up the phone to iCloud or iTunes (on your computer) BEFORE attempting the update, the data will be lost.

Second generation ipod and now when I turn it stays on the screen where it says the date and time and try to log in to use it and I can not to do.

second generation ipod and now when I turn it stays on the screen where it says the date and time and try to log in to use it and I can not to do.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
. Place the iOS device in Recovery Mode if necessary to allow the restore.
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Picture can not be resized to fit the screen, so i can only see half of my face when use it as wallpaper!! Suckss!!

picture can not be resized to fit the screen, so i can only see half of my face when use it as wallpaper!! How can I change it？？

There's a bug with the wallpaper. One thing that helps a bit, go to the photos app, find your pic, 'send' it to be wallpaper. You have a bit more control although not all the function you're used to.
No idea when or if Apple will fix it.

I had an accident with my ipod. i did not know that; nowadays, the warranty does not cover my ipod if the screen is cracked. but now the battery is not working. the warranty does help me for something??

i want help, not the same comments that i will not be helped. i admit my fault as the owner that i had the accident, but i believed that i was secured with my warranty. otherwise i would ha decided to do not have it if i was going to be the one paying to be fixed... how can i still trust Aplee Corp if the are not helping me with a devise that i paid the price that they decided giving me a warranty to be sure that i am secure while i use my devise. now i would like to know if i can have a refund of the warranty because i am looking for a different way to fix it because i have to pay and pay. but i paid for this situation and i had such assintance leaving me aside telling me that i am hopeless and also that i have to pay more and more.
ir does not work like that. i feel bad being treated like that.

angelferuz wrote:
nowdays, the warranty does not cover my iPod if the screen is cracked.
It never - ever has. The manufacturer's warranty covers you against faults due to manufacturing. (So if the screen did crack due to a manufacturing defect, Apple warranty would cover it, BUT - Apple would be aware and would be able to identify the cause of a cracked screen due to manufacturing defects, so ...)
Since you did not want comments telling you what you don't want to hear, you should condsider yourself lucky that you have any replies to this post. Sometimes, the truth hurts.

Is there a program that allows you to black out most of the screen content of a PDF and slide down like you would with an overhead (covered with a piece of paper)for teaching purposes??

Is there a program that allows you to black out most of the screen content of a PDF (on an iPad) and slide down like you would with an overhead (covered with a piece of paper) for teaching purposes??

Maybe this online manual would help.
* http://en.flossmanuals.net/thunderbird/interface/
Not sure how well printing it out would work, though.

Firefox freezes the computer for about 20-30 seconds (not even Alt+Tab works), the screen blinks black and then it shows the desired page. Does that several times at the beginning, then sort of stabilizes.

Firefox freezes the computer for about 20-30 seconds (not even Alt+Tab works), the screen blinks black and then it shows the desired page. Does that several times at the beginning, then sort of stabilizes.
This happens even if I simply hover the mouse over bookmarks, not even opening a page.
And waiting for this to happen some times or closing and re-opening seems to make it work ok again.
I've already disabled almost all add-ons (I'm using only one for Flash and NoScript right now), reinstalled Firefox (8.0.1), restoring only the bookmarks from an older version.

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

When using Safari, my iPad 1 will end Safari and return to the home screen for no apparent reason, any ideas as to cause and solution?

When using Safari, my iPad 1 will end Safari and return to the home screen for no apparent reason, any ideas as to cause and solution?

See if the following help.
Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data and also Clear History
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Turning off iCloud and multitasking gestures on the iPad might also help.

Is it possible to glue a protective film on the screen? Not hurt does it cover the screen

Is it possible to glue a protective film on the screen? Not hurt does it cover the screen?

You should only use Screen Protectors like these: https://www.belkin.com/au/IWCatSectionView.process?Section_Id=211415.
That are made for the iPad. If you glue something to the screen you will damage the screen when you remove the item.
This is a link to the Wikipedia article on what the Oleophobic coating on the screen is: http://en.wikipedia.org/wiki/Lipophobicity.
I can't determine what the effect would be using a screen protector. If you glued something to the screen, you would surely remove this coating though.
Some one else in the forum may have more insight into the matter.

Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work.

Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..

I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand

My MacBook Pro doesn't start; in safe mode shift CMD V the message "disk0s2: media is not present" is written on the screen repeatedly but the MacBook doesn't start. Do you have any ideas of why this should be or what I should do to resolve this?

My MacBook Pro doesn't start; in safe mode <shift CMD V> the message "disk0s2: media is not present" is written on the screen repeatedly but the MacBook doesn't start. Do you have any ideas of why this should be or what I should do to resolve this? Thanks Eamonn

Thanks for these suggestions: I have tried safe mode re-starts (both "verbose" and simple "shift" + power) to no avail. I get the error message "disk0s2: media is not present". Following this I inserted the installation disc and from there ran disc utility. The "Verify Disk" indicated an error " invalid sibling link" which it could not repair.
I also tried to completely re-format/erase the disk, but again got an error message "disk object invalid or unable to serialize".
Any ideas of what could be causing this or the best solution? I fear I am fast running out of options.

I used utilities to source my 10.6 snow leopard install disc to my main hardrive, and now when I turn on my computer the apple with the spinning wheel stays on the screen and stuck like that. How do I fix it Help please. I already tried all the commands

I used utilities to source my 10.6 snow leopard install disc to my main hardrive, and now when I turn on my computer the apple with the spinning wheel stays on the screen and stuck like that. How do I fix it Help please. I already tried all the commands such as Command R, Holding down the Option key, C and holding down shift at the start up but nothing happens.
initialy All I was trying to do was downgrade 10.7 to 10.6 .

You have to consider the possibility the hard drive may be dying. If your data isn't backed up, try one of the tools below:
https://discussions.apple.com/docs/DOC-1689
Once you are sure your data is backed up, we can examine other possibilities. In the meantime call AppleCare for your original installation DVDs. You may need them.

My macbook pro running lion will not boot . it stays on the grey page with the cog spinning. I have tried all methods of booting to no avail. I have removed the bottom and taken out the battery and the ram . will this affect my applecare warranty.

my macbook pro running lion will not boot . it stays on the grey page with the cog spinning. I have tried all methods of booting to no avail. I have removed the bottom and taken out the battery and the ram . will this affect my applecare warranty. I had to try myself as I'm overseas for two months and nowhere near any sort of help .

there was a recent software update that seemed to screw HDV up. Do some searching here over the last month or 2 and you'll find a bunch of posts and some possible solutions.
Worst case scenario, do as Shane suggests. But might I suggest you take a look at the user tips section of the forum. there are some great tips on how to prevent these sorts of problems by cloning your startup drive, etc.

I'm trying to record only part of my screen using my Quicktime 10.0, but once I press record in the "Screen recording" feature it automatically starts recording and doesn't give me the option to choose what part of the screen to capture. What gives?

I'm trying to record only part of my screen using my Quicktime 10.0, but once I press record in the "Screen recording" feature it automatically starts recording and doesn't give me the option to choose what part of the screen to capture. What gives?

QuickTime version 10 can only record the entire screen.
10.1, 10.2 and 10.3 offer part of the screen recording.

I keep getting a box asking me to upgrade the system. The box has a click for more info, but when I click it will not open. The overall box stays on the screen only a few seconds. I cannot be sure that this is not a scam.

There are no details about which version the update applies to.
I cannot be sure that this is not a scam so I have not uploaded it. The fact that the box stays on the screen for only a few seconds, before the regular Firefox screen opens, suggests that the box wants the user to make a quick, uniformed, decision, and to press "Next" rather than find out about the changes.

Did you ever install a Firefox 4 beta (or RC) version in the past?
It is possible that you are still on the beta update channel if you ever installed a Firefox 4 beta version or a release candidate. 
You can check that by looking at the pref app.update.channel on the about:config page. 
If the value of that pref is beta then it is better to download and install the latest Firefox 4.0.x release. 
You can find the latest Firefox 4.0.x on this site:
* http://www.mozilla.com/en-US/firefox/all.html

I do not use my program much. It will not exit, it stays on the screen.

Similar Messages

Maybe you are looking for