I do 'router isis' but I get 'protocol not in this image'
C2610, IOS 12.3.
I've searched this on forums but I couldn't find the answer:
I attempt to do 'router isis' but IOS returns 'protocol not in this image'. How can I solve this ? I would like to work on ISIS redistribution labs against EIGRP, OSPF, etc.
Thanks for info. hmmm... I need to search it more, but so far it seems my image can't do ISIS...
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.3(12b), RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Thu 31-Mar-05 19:08 by jfeldhou
Image text-base: 0x80008098, data-base: 0x80CCAA68
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
ROM: C2600 Software (C2600-I-M), Version 12.3(12b), RELEASE SOFTWARE (fc2)
RouterC uptime is 8 hours, 16 minutes
System returned to ROM by power-on
System image file is "flash:c2600-i-mz.123-12b.bin"
cisco 2610 (MPC860) processor (revision 0x203) with 28672K/4096K bytes of memory
Processor board ID JAD05390K1C (3082946085)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
--More--
Similar Messages
-
i have a mac osx version 10.6.8 no windows installed and i am trying to install a program but keep getting can not run in dos mode ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?
You run Windows in Parallels or Fusion. Then in Windows you install the program.
-
Trying to access Netflixs and pick movie but I get "Unable to load this content at this time"
trying to access Netflixs and pick movie but I get "Unable to load this content at this time"
This earlier posting worked for me:
"This worked for me without having to reset my Apple TV universe: Press Menu and Down Arrow keys simultaneously for 6 seconds until the light flashes rapidly."
Thank you! -
Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.
Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.
-
Am trying switch from an earlier iPhone to an iPhone4. I have had the Simcard cut to the right size and put it in the iPhone 4 and gone to iTunes. I have clicked on Restore but I get the message that this cannot be done: "unknown error 1604" . What to do now, please?
Thanks, good suggestion, but after trying recommendationsthere I still have the problem of error 1604 happening and no progess.
-
Get could not connect this Iphone to itunes because of unknow error (0xE8000065) when trying to connect an ipod touch to itunes. Anyone know what this message means?
See:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting -
I can not back up my iPhone. It says I need more storage space. I purchased more space and icloud says it is there, but the phone is not recognizing this and continues to say that I need to purchase more space in order to back it up. Any ideas?
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
Hello,
My old emails address which I have used as my apple id for 10 years is being made redundant. I have changed the email address to a new gmail one and this is my new apple id. But my iMac has not recognised this. It keeps saying it wants the password for my old email address. I have seen some advice on these forums which suggest signing out of iCloud and then back in again. But when I start doing this it asks me if i want all the photos deleted that have not been downloaded onto the mac.
I have had an iCloud account for quite sometime and I'm afraid of losing everything in my cloud if i sign out and sign in with a new id.
Is this fear realistic?
I know I can change back to my old email, sign out and then sign in wight he new one...
Please help!This did not work for me. My old email account for iCloud still pops up on my screen every time I open my macbook. I've deleted it, reset it, every thing I can think of and it still shows up. I think six months of this is more than enough time to wait.
RDG -
Runninig 10.6.8 on new iMac. The last two weeks I keep loosing internet and have to turn airport off and on to restore service. This happens every time it goes into sleep mode. It is not the router as my two laptops do not have this problem. I read that in 2008 MMP's had a similar issues .Any thoughts?
Go to /Library/Preferences/System Configuration
Move all the files from the System Configuration folder to the Trash.
Restart your Mac. See if that made a difference. -
I have switched of the Badges but I still can not export the images?
I have switched of the Badges but I still can not export the images? because the badges are still showing on the images.
If you are seeing something overlayed on the exported image, this is probably not caused by the badges overlays, but by a watermark.
Check your export preset, if a watermark is enabled. In the "Export" panel set the "Export Preset" to "Edit" and check the settings for the preset you want to use. Disable any watermarks. -
I'm trying to upgrade to FF4 but it's just not working.
Please help.
It is getting worse
Adobe flash player is crashing. I already uninstalled and re installed the latest ver. Also it is hanging randomly.
Please help. -
when I try to enable my icloud I get 'Account not verified - check email'. But no email is received
It could be that the site is trying to determine your location to enable downloading from nearest to your location. So sometimes the download confirmation box may take some time to appear.
You can also try this direct link: http://releases.mozilla.org/pub/mozilla.org/firefox/releases/9.0.1/win32/en-US/
'''Firefox Setup 9.0.1.exe''' is the file. This is the US English version. To look for other versions, click '''Parent Directory''' to traverse back. -
When I click on a link received by email to complete registration and activate my membership to a Harley forum, I get "404 NOT FOUND" Not Found
The requested URL /register.php was not found on this server.
Any ideas what might account for my inability to reach this site? This sort of thing doesn't happen often. Any help or suggestions would be appreciated. Thank you, Paul (debreeze)I'm not sure why you believe that I'm running an outdated version of firefox but according to my files I'm running product version 3.6.12. In the support notification I received questioning the file version running on my computer, the link I had a problem with http://www.harleyhowto.com/forum/register.php\ was also included. When I clicked on the link I went directly to the site with no problem. Then I opened the original email containing the same link, clicked and went to 404 NOT FOUND ! I'm going back to the web site and go through the registration process again and keep my fingers crossed hopping it works when they send a new verification email . I will post the outcome, either pos. or neg and may be asking for further help. Thanks, debreeze
-
GOing bananas trying to play an episode from channel 7 in Perth. Tryed using Photon for flash and ads play but not main event. Get a message not available in your region.
HOw can I catch up with my favorite programs? Tv station recommends I change my IP address but I don't know how to do that or to change it to what. Love some ideas. Thanks, LouThank you so much, Ram! I REALLY APPRECIATE YOUR HELP!
I am wondering if it possible to manually create a node in RSA6 for the InfoSet. I tried it by doing the following:
I went to RSA6 and clicked on the white icon for "Create Node". I then entered the number "8", followed by the name of the InfoSet. (I entered an "8", because all our DataSources seem to start with an "8". I'm not sure why.)
The DataSource now shows up, but when I double-click on it, nothing happens. When I select it in the hierarchy and then click the icons for "Display" or "Change" or "Check", I just get an error message that says, "You have not selected any DataSources."
Also, do you know where I can get my hands on the white paper?
Thanks again!
Regards,
Sarah-Jane -
I need to obtain the following
Keyboard keys
#define VK_BROWSER_BACK 0xA6; // Windows 2000/XP: Browser Back key#define VK_MEDIA_NEXT_TRACK 0xB0; // Windows 2000/XP: Next Track key#define VK_MEDIA_PREV_TRACK 0xB1; // Windows 2000/XP: Previous Track key#define VK_MEDIA_STOP 0xB2; // Windows 2000/XP: Stop Track key#define VK_MEDIA_PLAY_PAUSE 0xB3; // Windows 2000/XP: Play/Pause Track key The key are on the keyboard, but are the only keys the Event can not detect.(All other keys can be detected.) Does labVIEW have a way to get the value when these keys are pressed?. Is so can someone direct me to a site or example page.Hi TwoCentsHappy,
i think it should be possible with this library.
http://zone.ni.com/devzone/cda/epd/p/id/4394
Mike
Maybe you are looking for
-
Unable to download the data perfectly into excel sheet
Hi Frnds, when i am trying to download the data from the output of a report into excel, some of the records(line items/rows) are getting stored in one of column of the excel sheet. Fog eg: my report outputs 500 line items. In excel after 100 rows the
-
How do I restore mailboxes from a hard-drive back-up?
Hi there, I had a hard-drive failure after upgrading to Yosemite. I managed to get the drive backed-up, but not in time machine. I have been restoring things piecemeal. One thing I need to figure out is how to import my old mailboxes. Where are t
-
How to read number of ';' in a text file
I have a text file with size 2kb. The file has names seperated by ';' . For example John, Smith; David, Putnam; etc .. Now I have to read the file and find out how many ';' are there. I tried GUI_upload to read the text file and I think I did not get
-
CS6+ executeMenuCommand, pattern swatch
Hi all, I'm trying to create a Pattern Swatch out of the Selected Object, so I'm using app.executeMenuCommand ('Define Pattern Menu Item'); this successfully adds the swatch to the swatches panel, but it also brings up the Pattern Options Panel and g
-
I'm using an iPhone 4S with the latest updated software. Under "usage" it shows less available than total, so my last backup went through (have only done that once in the short time I've owned the phone). I had it setup to only backup manually, whe