I don't have a project start arrow - can only slide the project end arrow.
I don't know if there is a simple solution, but I haven't been able to locate the project start adjustable arrow anywhere. So it's locked at 1.1.1.1 but I can adjust the end.
I seem to have found the solution...checking the Show Advanced Tools under general allows you to affect project starting.
Similar Messages
-
If I view events there is the same thumbnail for all 270 events and if I open an event I have black thumbnails. I can only see the photo if I open it individually.The only way I can then see the thumbnail is by editing each photo. Then to even further complicate matters the last editted phot is replaces as the thumbnail on all events foders!...grrr. This is what I awoke to two mornings ago after inly backing up my machine which I do every night.
No. Quitefrankly I didn't know I could even use iPhoto on iPad, I just have the photos app that came on it. This is on my laptop. I don't particularly like iPhoto I use it essentially to take photos off my camera and store all the originals. I use Photoshop. To work on them and store them in Dropbox (don't get me started on iCloud!). As I said this is a problem that seemed to crop up overnight after backing up to my external HD.
-
We have an iPhone 4S and can only see the top half of the screen.
We have an iPhone 4s and can only see the top half of the screen. The phone works fine as far as making calls and you can kind of text, if you can figure out where the keypad is. Is there a fix for this or is it trash? It is out of warranty and we don't have insurance on it.
kdbeck88 wrote:
a new phone is out of the question.
Then I guess you'll have to live with a broken phone as a new one is your only option. -
I'm just trying to revive my old PowerPC G4/ dual 867MHz 512MB. Unfortunately I am unable to install from disc since my optical drive, although still working, is somehow not able to read the leopard installer. I wanted to try the remote install option but have limited resources and don't have a network where I can have both the Mac desktop and windows laptop communicate. I read somewhere that I can use a crossover cable to connect the two directly. I'm still trying to see if I can get an external DVD-ROM as another option. Any suggestions?
Your Mac doesn't need a crossover cable, it auto-switches...
http://support.apple.com/kb/HT2274
But I have no idea how that will help you install from a Windows computer.
If you get an external DVD drive it needs to be Firewire & Mac bootable.
Other solution...
http://support.apple.com/kb/HT2274 -
I purchased an ipad for my Mother and it has been great, until now. It is now asking for a Passcode to access it and I don't have one.
Can anyone help ?In Setttings - Mail, Contacts, Calendars select your MobileMe account. Make sure Find My iPad is turned on.
-
I edited my movie with an iMac. Now I have a Win but I can't open the project
I edited my movie with Premiere Pro CS5 in an iMac. Now I need to make some changes, but I have a Windows station.
When I try to open the project, an error message comes up:
"This project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type".
I read similar threads and I tried everything, but nothing worked.
I'd truly appreciate if anybody could lend me a hand on this.
Thank you very much.Jim,
I've tried, but no luck. In other project files I have in this computer ("good files"), they have different values on those lines. The only one that is common in all is:
<Project ObjectID="1" ClassID="62ad66dd-0dcd-42da-a660-6d8fbde94876" Version="23">
and in the "bad file" the Version is "25".
I tried to changing it...but no luck.
I'm sure in this code there is the explanation/solution for all this, but there are thousands of code lines, and the word sequence appears too many times.
It's first time I heard about XML export and I haven't been able to find any XML file. -
How can I increase my storage. I have been trying to upload the latest iOS & can't bc I don't have enough room & I really don't have a lot of apps.
You cannot increase your storage capacity at all.
You can remove content from your iphone or you can update via itunes on your computer. -
Syncing my iPad with my iPhone via wifi
It depends on what you mean by "sync the iPad with the iPhone". Technically, you can't sync the devices like you would sync with a computer anyway, so you can't think that way. You can keep the two devices in sync, but if you want two devices with identical content on them, you have to restore one device from the backup of the other device for starters.
After that, you would have to download the same apps on the one device that you have on the other device, download all of the same songs, movies, TV shows, podcasts, and so on. The you would have have iCloud enabled on both devices in order to keep app data in sync, if the apps work with iCloud. So enable iCloud on bit devices and go to Settings>iCloud and turn on all of the items in there...mail, notes, reminders, Safari, calendar, photo stream, contacts, documents and data, etc.
You would also have to turn on automatic downloads in Settings> iTunes & App Store>Automatic Downloads> on for songs, apps and books so that whatever you download on one device downloads to the other device.
If you have any apps that do not work with iCloud for the purposes of syncing app data, it will be impossible to keep the two devices identical total in content. -
How to display Issues for the projects which user can view in the Project Center View
Hello All,
In the project center view, at the bottom, we need to add one table, which can show the Issues for the projects that are displayed in the project center view.(Projects visible to the current user).
Example: A resource 1 can see the Projects Project 1, Project 2,Project 3 in the project center view. So resource 1 should be able to see all the issues that are entered against the Project 1, Project 2, Project 3, irrespective of the issue that has
been assigned to any resource.
Please help.Hi,
You could simply edit the page and add the risks and issues webparts. This will display risks and issues assigned to the user.
Click on edit page, then add webpart. In the Project We App section, pick up the risk webpart and then the issue webpart. Finally drag them to the bottom of the page and close the page.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller | -
''dupe of https://support.mozilla.org/en-US/questions/916854''
I only know that there are other tabs open because the + button is halfway across the tab bar. then when I click in what appears to be an empty space with no tab, a tab opens up, and the one that I was working on disappears again.??...
please help!!
many thanksIt could be a Toolbar issue. Could you try resetting and see if it will solve the problem?
# On the menu bar, click the '''Help''' menu and select '''Restart with Add-ons Disabled...''' Firefox will start up with the Firefox Safe Mode dialog.
# Put a check mark by '''Reset toolbars and controls''' and '''Reset all user preferences to Firefox defaults'''.
# Click '''Make Changes and Restart'''. -
I bought mountain lion for my macbook pro and I'm trying to install it and it says there was an error and I need to boot up but I don't have any other start up disks to boot up with. Are there any suggestions of how I could get my computer started?
Hold the Option key down and restart. Select one of the drives that comes up and hit the Return key.
-
I have a problem with my macbook,if I don't have my earphone plugged, I can't listen anything,and start shine a red light .what should I do?
try inserting and removing the headphones in and out of the audio jack. The toggle switch is stuck and your mac thinks the headphones are still plugged in.
-
I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?
I have a sony handicam and I imported the clips to iMovie and they lost quality and converted the audio to stereo. I want to import the project to final cut X and import the AVCHD in 1080p and surround sound and export the movie in bluray. Can I relink the clips without editing everything again?
thanks!Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings -
I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues.
I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
Is there anyone who can give me some pointers ?Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
Good luck! -
Hi ALL,
hope you are well.
I can't remember my Answers for the security questions and i can't reset my Security questions because i don't have a rescue mail what can i do?
and i tried calling the security support team and they told me they will send me an instructions how to do it and still got nothing till now.
So please can i have some support.
I'll appreciate your help.
ThanksReset Security Questions
There are several different methods. Try one. If it doesn't work,
then try the next one. Don't try to do everything at once.
Frequently asked questions about Apple ID
Manage My Apple ID
Note: you may need to continue entering false answers to the questions until you trigger the response needed to start making changes. It will take six or nine retries.
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
1. Go to: Apple Express Lane;
2. Under Product Categories choose iTunes;
3. Then choose iTunes Store;
4. Then choose Account Management;
5. Now choose iTunes Store Security and answer the bullet questions, then click
Continue;
6. Sign in with your Apple ID and press Continue;
7. Under Contact Options fill out the information and advise iTunes that you would
like your security/challenge questions reset;
8. Click Send/Continue.
You should get a response within 24 hours by email.
In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service.
Another user had success doing the following:
I got some help from an apple assistant on the phone. It is kind of round about way to get in.
Here is what he said to do and it is working for me...
a. on the device that is asking you for the security questions go to "settings", > "store" >
tap the Apple ID and choose view"Apple ID" and sign in.
b. Tap on payment information and add a credit/debit card of your preference then select
"done", in the upper right corner
c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
should be asked to verify your security code for the credit /debit card and NOT the
security questions.
d. At this time you can remove the card by going back in to edit the payment info and
selecting "none" as the card type then saving the changes by selecting "done". You
should now be able to use your iTunes store credit without answering the security
questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends!
Maybe you are looking for
-
Since upgrading my mid-2010 MacBook Pro from the original Snow Leopard to Yosemite 10.10.2 there have been multiple instances of restart (crash) also slow operation & pop up message stating web content has failed. Any suggestions?
-
hi to all, how to pass select-options in function module. in our program one select-option iz dere. this select-option must pass to one exporting parameter in standard function module. reagrds satya
-
How can i use a function in a create table?
I have done one funtion to do one check in a create table statement, but i don't know where to use it. How can I use it?
-
Hi, I'd be interested in ideas for producing a matrix-style report (similar to that possible with Oracle Discoverer or Pivot Tables in spreadsheets). Example below. I've tried dynamic SQL (report based on function returning a SQL query) but this quic
-
I am not seeing traces in the xsengine trace log; nor am I able to effectively set breakpoints in the Web Editor and stop page processing. I'll start by defining roles and configuration, describing actions that aren't working, and then finish with 2