I don't have any color in my icons in the finder

I don't have any color in my application icons in finder.

Go to the link below, download and install the program. Please read the instructions on the page.
http://culater.net/software/SIMBL/SIMBL.php
Then go to the link below, download and extract the program. Put the program in the plugins folder created above.
http://cooviewerzoom.web.fc2.com/colorfulsidebar.html
Force quit Finder and when you open a new Finder window, you should have color in the sidebar, although not across the top. You will need to Force quit Finder and open a new window after almost all restarts and startups.
Not perfect, but it works.
As an alternative, you can go to the link below and download the program. In the Lion Tweaks section, there is a tweak to restore color in the Finder sidebar, but I haven't tried it, so I don't know if it works.
Hope this helps.

Similar Messages

I don't have any volume. When I push the mute button or try to increase the volume up or down nothing happens. The volume shows up as if it were at full volume but no sound. I am so frustrated.

I need some help with the volume on my macbook pro. I am getting absolutely no sound no matter if I push the volume increase or decrease button. Nothing changes. The volume bar shows up as if it were at full volume but no sound and the mute button doesn't do anything either.
Please help.

Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers.
    Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
    If you see red light in the headphone port or not, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
    Try this even if you don’t see the red light.
3. Reset PRAM. http://support.apple.com/kb/PH14222
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so,uncheck it.
6. System Preferences > Sound> Sound Effects
    Play sound effects through:
   Select "Internal speakers" and then back to "Selected sound output device".

I don't have any sound and can't adjust the brightness Macbook Pro Mid 2009 with Windows 7 64bit

I installed Windows 7 Professional 64 bit in my Macbook Pro Mid 2009 using Bootcamp 5.1.2 and from the beginning the sound is not working and cant adjust the brightness either. Tried installing all the drivers that people recommended from Realtek, nVidia and nothing has help me fixed the problem. is there a way that i could fix those problems?

Look in the Boot Camp system requirements located here: http://support.apple.com/kb/HT5634
Find your computer model and year. I think you will find that you should be using version 4 of the Windows support software.
MacBook Pro
(13-inch, Mid 2009)
4
4
DVD
DVD
DVD
MacBook Pro
(15-inch, 2.53 GHz, Mid 2009)
4
4
DVD
DVD
DVD
MacBook Pro
(15-inch, Mid 2009)
4
4
DVD
DVD
DVD
MacBook Pro
(17-inch, Mid 2009)
4
4
DVD
DVD
DVD

Lenovo Beacon error You don`t have any RAID system.

Why when I click get thi error You don`t have any RAID system, but after while the raid system shows?

Ivan_Xiao wrote:
Beacon default use JBOD, and you might do the Raid in setting manually. After you set it, the system might take a while to apply the setting.Yeah, but I have only one HDD set as JBOD, so how can I use those features without second drive? Is my Beacon forcing me to buy another HDD and set it into RAID? By the way, I have already tried that with two old HDDs with no success. mrobo11 is right, unless you restore your Beacon into default setting with old FW, you can't get rid of this error message. I have done that this morning. I was able to get into FTP settings, WebDAV etc. and when I changed several things (including name of the device BEACON->NAS), applied and restarted, my Beacon welcomed me with same old "You don't have any RAID system" message :/

I don't have any sound on my iPad.

I don't have any sound on my iPad.

See the reply that was left on your first post.

How do I create an icloud id on my pc? I don't have any apple device.

Is it possible to use create an icloud id on android device or a windows pc? I don't have any apple device.

http://www.apple.com/ca/icloud/setup/pc.html
Try this link. You will need to have an icloud account and other Apple devices but this will help store pictures etc. not sure what you are trying to do but maybe this will help.

I need to migrate CUCM 8.6.2 from 6.0.1 but don't have any DVD of old 6.0.1

Dear Experts,
I have new project which has been abandon for long and assigned to me recently.
I know what is the steps we need to work.
1. DRS from current CUCM version
2. Install same version of 6.0.1 to new Server
3. Backup from step1.
4. Upgrade to 8.6.2(it is not direct support, so I have to upgrade to middle version first)
But customer doesn't have current CUCM(6.0.1) version of DVD and I cannot find the version from Cisco site as well.
1. Can I export BAT from old version and import BAT to new version ? will it work ?
2. I don't have any bootable version either of old or new, so I need to make bootable after download from Cisco site.
I googled and some site said I can copy bootsector from bootable DVD and copy to new DVD, in this case even though it is not same version, for example, if I copy from 10.5 version and copy to 8.6.2, does it make bootable DVD ?
3. How can I remove all configuration on CUCM ? is it CLI command if I can ?
Thanks in advance
Jason

Hi Jason,
There is a way, however if you got into any bad situation or needed any help during the process TAC WILL NOT be able help.
http://htluo.blogspot.com/2010/04/how-to-make-non-bootable-iso-image.html
Try this method, and you should be able to create bootable DVDs from non-Bootable ones.
Secondly, you may raise a TAC SR and request them to release the Bootable media for 6.0.1
HTH

My 16gb iPhone 4S keep tell me that my storage is almost full and I don't have enough space for any upgrades. I don't have any music or videos on my phone. I deleted all old emails, texts, contacts and apps but still nothing. When I check my settings, I n

My 16gb iPhone 4S keep tell me that my storage is almost full and I don't have enough space for any upgrades. I don't have any music or videos on my phone. I deleted all old emails, texts, contacts and apps but still nothing. When I check my settings, I noticed that my Instagram is at 732mb and it keeps rising. Now it's at 814mb. Please help!!!!!

What is the precise wording of the message that is occurring?
Are you attempting to update via iTunes on a computer or over the air on the device?
How much free space is actually on the device?
If updating via iTunes on the computer, how much free space on the computer?

I have updated my iPhone 3s to the latest software. I had backed up my phone before I did this. Now I have lost my music and apps. I can't sync the phone with my Mac, I can't re-download as the phone says I don't have any music or apps available. Help!

I have updated my iPhone 3Gs to the latest software in an attempt to iron out a problem with a new telephone network provider (Tmobile). I had backed up my phone before I did this. Now I have lost my music and apps. I can't sync the phone with my Mac, I can't re-download from iTunes as the phone says I don't have any music or apps available to re-download although it all shows up on my Mac. The music and app content cannot be restored when I try to restore the phone from the back up I madeon my Mac. Help!

Working on that now. I'm just getting frustrated that everytime I run updates for the phone I end up with tech problems that I have to spend time solving as opposed to updates that actually improve my usage. Now I will once again get to spend hours reloading my phone all for updates that didn't affect my usage in the first place.

I am trying to use iCloud to find my stolen iPod, but it says I don't have any devices with my account, help?

I had my iPod stolen out of my school bag. I was told to use iCloud to find it. But when i got onto iCloud it said something like i don't have any devices set up or something. Any idea of what i can do to find my iPod location?

On your iPod Touch.
iCloud- Find My iPhone overview
Find My iPhone
What To Do If Your iDevice Is Lost Or Stolen
iPhone, iPod Touch, and iPad
If you activated Find My Phone before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi or cellular. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. iCloud- Use Lost Mode
6. What to do if your iOS device is lost or stolen
7. 6 Ways to Track and Recover Your Lost/Stolen iPhone
8. Find My iPhone
9. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues. I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion.

I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues.
I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
Is there anyone who can give me some pointers ?

Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
Good luck!

Is there a way to move music I had on my iPhone 4 to my new macbook air, using iTunes it seems to want to synch to iTunes library where I don't have any music stored?

is there a way to move music I had on my iPhone 4 to my new macbook air, using iTunes it seems to want to synch to iTunes library where I don't have any music stored?

Hello KM47,
It soundsl ike you are needing to copy your iTunes purchases to your computer rather than sync it at this point. You can use the following article to transfer your purchases with the following article:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/ht1848
If you have your library stored on another computer, you can also copy the library to the new MacBook Air with this article:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Thank you for using Apple Support Communities.
All the very best,
Sterling

I can't rent movies now, because I'm getting a message that I need to "go to the itunes store on my computer and verify my payment information. But it is all correct and I don't have any problems buying anything else but movies on Apple TV? What can I do?

Apple can't seem to help me with this verification of payment information message that I'm getting when I try to rent a movie. My payment information is correct, and they don't have any issues billing me for anything else. What can I do?

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

I bought mountain lion for my macbook pro and I'm trying to install it and it says there was an error and I need to boot up but I don't have any other start up disks to boot up with. Are there any suggestions of how I could get my computer started?

I bought mountain lion for my macbook pro and I'm trying to install it and it says there was an error and I need to boot up but I don't have any other start up disks to boot up with. Are there any suggestions of how I could get my computer started?

Hold the Option key down and restart. Select one of the drives that comes up and hit the Return key.

I have an old ipod and want to know how to get everything off it and into my iTunes library. My old computer died and the original library was lost, so don't have any of the content saved anywhere else.

I have an old ipod (it's the very thin oblong one in purple, the one before the one that does video) and want to know how to get everything off it and into my iTunes library. My old computer died and the original library was lost, so don't have any of the content saved anywhere else. I now have an iPhone 5S and listen to music on that, so want to be able to listen to things from the old ipod too.
Can anyone help please?
Thanks very much
Jane

Apple normally does not get involved in handling lost objects like this. Since a real name is not installed it will be much more difficult.
You can try contacting Apple support at the US number, assume you are US going to BWI from the listing: http://support.apple.com/kb/HE57 and explain the situation and see if they offer any suggestions.

I don't have any color in my icons in the finder

Similar Messages

Maybe you are looking for