I don't have any Final Cut Pro Sound Effects. Help Me

I just Downloaded Final Cut Pro Yesterday, Today I Went To Check It Out And Noticed I didn't have any Final Cut Pro Sound Effects. Everyone says there is two folders with the same name, one grey one blue, but there both grey for me. I go into finder and there is no such folder anywhere.

Final Cut Pro X Content v1.0
http://support.apple.com/kb/DL1394   <<< click here.

Similar Messages

  • Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

    Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

    I just went through this and it appears that my Focusrite Saffire was the culprit. I connected all the outputs on the focusrite according to the way the jacsk on the back were labeled and then set up the multichannel speaker setup to match. Then I went into STP, created a pink noise clip and panned it around, the LFE, center and rears were not in the right place.
    I reconnected the hardware to match the 5.1 pan pot in STP then changed the multichannel speaker setup to match. Everything appears to be correct now but I would have loved to have been able to just assigned the output busses to correct outputs in the saffire.
    Next step is to pan that pink noise around with my SPL meter to calibrate the room.

  • Wheres the final cut pro sound effects

    Downloaded Final Cut Pro, $299, where's the final Cut Pro Sound Effects?  Mine is empty when highlighting the folder

    melfrombrookfield wrote:
    Downloaded Final Cut Pro, $299, where's the final Cut Pro Sound Effects?  Mine is empty when highlighting the folder
    It's all in the additional download, like Stephen said.

  • Why can't I add final cut pro sound effects?

    I am wanting to add a sound effect or background music to my video but I can't access it through final cut pro x.  I see the only option I can add music through is iTunes.  It doesn't give me any other folders.  I even tried to drag in the folders from the finder (because these sound are in my computer) but that didn't seem to work. Please help!

    Skyking wrote:
    I'm wondering if that had something to do with it.
    I doubt it.
    Howvever, in hte category of misery (actially, an annoyance) loves company, I have a similar photo browser issue. It links…until it doesn't.
    Russ

  • I have used Final Cut Pro 7 for about a year. Two weeks ago when I tried to open it, it opened for 15 seconds and then the icon disappeared. I have tried to reinstall and it didnt help. any one has similar case or can help?

    I have used Final Cut Pro 7 for about a year. Two weeks ago when I tried to open it, it opened for 15 seconds and then the icon disappeared. I have tried to reinstall and it didnt help. any one has similar case or can help?

    Please post your problem in the Final Cut Studio (Final Cut Pro 7) forum:
    https://discussions.apple.com/community/professional_applications/final_cut_stud io?view=discussions
    You'll get the help you need in that forum.

  • Motion 3.02 - cannot open any final cut pro projects

    Please help. Motion won't open any Final Cut Pro projects, and I've been training to learn Motion, I'm stuck on this lesson because I can't open a FCP project. All FCP projects are greyed out when I go to Open in Motion, and even if I right click the project file and Open With and force Motion to, it cannot open the file. I can "Send To > Motion" in FCP and that works, but it's not the same.
    I have FCP 6.06, both are part of Final Cut Studio 2 Academic version. Not that my FCP version matters, because the CD provided in my Motion 3 training book gave me a (probably) FCP 6.0 project file, even when I updated it, it won't work. Not even my old old FCP files from previous versions can open with Motion.
    Much thanks.

    But it can be done the other way, perhaps you reads about that. Motion files can be imported into FCP and used just like regular clips.
    adam

  • I have purchased Final Cut Pro for my imac and now want to put it onto my macbook air so I can use it when away from my desk. How can I do this

    I have purchased Final Cut Pro for my imac and now want to put it onto my macbook air so I can use it when away from my desk. How can I do this

    I took away my backup disk with me so just took it from there excellent. I am back home at present working on my imac. When I go to use my macbook air on these projects (when away on boat) is it easiest to simply copy the Project and Events folders in total from my imac onto the other machine and do the same upon my return in reverse? I don't use icloud

  • How do use the hum remover in final cut pro 5? Help

    How do use the hum remover in final cut pro 5? Help!!

    Simply drop the effect onto the appropriate audio track. Set the frequency for the hum frequency (50Hz or 60Hz depending on your power supply). Include whichever harmonics you think might be present eg. 100, 150, 200Hz.
    Note that I have generally had more success by using Soundtrack Pro's noise removal tool.
    Trevor

  • I don't know what Final Cut Pro Academic Version 4.0 I have.

    Hi. im interested in upgrading to Final cut studio, but I do not know if i qualify.
    No where on my install disc does it say waht numer it is. I've looked at the download order forms for the crossgrades etc. But i'm still not sure what model no# miine is.
    Where can I find out?
    Final Cut Pro 4
    Academic (M9153LL/A), <---where do i find this number, or a simlar no# so i wonot waste my time turning my software in for nothing?

    poops,
    If you still have the original box FCP came in -- big black box containing the manuals, disks, etc. with an outer shell that slides off -- look on the outside of that box for a sticky label. That's where you'll find the # M9153LL/A, and the word "Academic" should be on there as well.
    The FCP install DVD probably has some other number on it, but for sure you should see the word "Academic" printed on the label. Also, the version # (like 4.0.1) is printed on the same disk.
    All you have to send in is the one FCP install disk.

  • Are there any Final Cut Pro 4 conflicts with 10.3 Panther?

    I just bought FLIP4MAC software which will allow me to save my Final Cut Pro 4 Quicktime movies as Windows Media Files (I make short comedy films), but neglected to see that it only works with 10.3 Panther. I've been running 10.2.8 for over a year and it doesn't have any conflicts with FCP 4 that I can see. I've purchased the 10.3 installation disks already. Any conflicts I should be aware of before I jump in and install?
    Thanks.

    AS long as ur not in the middle of a project, I'd go ahead and install.

  • Need to reinstall windows but don't have any CD - Satellite Pro L20

    Hi, I wanted to reinstall Windows XP home onto my Satellite Pro L20, but don't have any of the software my laptop came with (read lost the disks). I have a valid XP home key (as its stuck on the bottom of my laptop) but no disc so I tired using a copy of a Windows XP home cd, which didn't work, but did let me get as far as formatting the hard drive.
    So right now I'm using Ubuntu, but want to reinstall Windows. Have valid product key but no software to reinstall.
    Any suggestions?
    Thanks
    Christopher

    Are you kidding now?
    Do you understand English or what?
    I will try to be clear enough and constructive too in hope you will understand your situation.
    Some facts for you:
    - Recovery image *CANNOT* be downloaded
    - Following link http://eu.computers.toshiba-europe.com >Support & Downloads you can find all drivers, tools and utilities for your notebook model
    So back to your situation:
    For clean OS installation you have *_two_* options only:
    - if possible order new copy by Toshiba authorized service provider in your country *do you have more questions about that?*
    - you can install operating system using Microsoft installations CD *if you don't have it, it is your problem*
    Can you please tell me if all this is clear now?
    If you have more questions please ask.

  • Ilife Sound Effects and Final Cut Pro Sounds are not appearing in Final Cut Pro X anymore!?

    Hello,
    I am new to the app Final Cut Pro X. And recently when I have gone into the Music and Sound Folder in final cut pro the option for Ilife Sound Effects and FCPX Sound Effects do not appear. I have read other forums and they have said to drag the sound files into FCPX but that isn't even a option. It onlt has iTunes options, please reply back someone this is stressing me out. I don't know if it is because of Mavericks or whatever but it is driving me insane and I need help!
    This is what it looks like .

    This is a known issue in FCP X 10.1 and you will find many posts about it in the forum just do a search. Several solutions have worked for different users. Try the following:
    1. Open and close GarageBand then relaunch FCP
    2. Open and close iPhoto then relaunch FCP
    3. Close and reopen FCP
    4. Trash FCP preferences then relaunch FCP
    Any one of these may work. Just try them in any order. Be aware the problem may recur.

  • FINAL CUT PRO 7 - Please Help!

    Suddenly my final cut pro project is unreadable -- the clips on the timeline are now grey and they don't show on the viewer anymore. The audio is inaudible, except for some weird cracking sounds. What is going on?? Please help me!

    Hey Cecilia153,
    Thanks for the question. In troubleshooting this issue, a great place to start would be to delete the user preferences:
    Final Cut Pro 7: Troubleshooting Basics
    http://support.apple.com/kb/TS1846
    Remove receipts and reinstall Final Cut Pro
    Another approach you might consider is reinstalling Final Cut Pro 7. To do this effectively, you need to remove the application and its receipts, then install Final Cut Pro 7 and use Software Update to install additional updates. You don't have to remove everything that was installed with Final Cut Pro 7. Follow the steps below to completely reinstall a fresh copy of Final Cut Pro 7.
    Next, see if you can locate the media in Finder and attempt to open it with Quicktime. If the media is not damaged, and plays fine, you might need to reconnect it to Final Cut Pro:
    Final Cut Pro 7 User Manual: Reconnecting Clips to Media Files
    http://documentation.apple.com/en/finalcutpro/usermanual/index.html#chapter=92%2 6section=6%26tasks=true
    Reconnecting Clips to Media Files
    Clips in your project don’t have to be offline for you to use the Reconnect Media command. You can reconnect media files to clips in your project at any time, since all you are doing is changing the file path stored in the clip’s Source property.
    Thanks,
    Matt M.

  • Can't open Final Cut Pro anymore. HELP!!!

    I can't open my Final Cut Pro. When I click to open it, a message comes up saying, "Final Cut Pro quit unexpectedly." It tells me to click reopen to open the application, but every time I click reopen, the same message screen comes back. I can't open Final Cut. I need help.

    I am having same exact problem.
    It was working fine for years, and all of a sudden, after a Mac Os X Software Update it will NOT open, ( I think this may have caused the problem, however I am not sure)
    Here is details of Report:
    Process: Final Cut Pro [581]
    Path: /Users/WhOaGRL17/Desktop/My Stuff/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier: com.apple.FinalCutPro
    Version: 5.0 (5.0)
    Build Info: FCPApp-504212200~2
    Code Type: PPC (Translated)
    Parent Process: launchd [137]
    Date/Time: 2010-04-13 15:54:23.229 -0400
    OS Version: Mac OS X 10.6.3 (10D573)
    Report Version: 6
    Interval Since Last Report: 76964 sec
    Crashes Since Last Report: 5
    Per-App Crashes Since Last Report: 5
    Anonymous UUID: 581E4045-302A-46D0-8E01-0F5D3D1554C8
    Exception Type: EXC_CRASH (SIGTRAP)
    Exception Codes: 0x0000000000000000, 0x0000000000000000
    Crashed Thread: 0 Dispatch queue: com.apple.main-thread
    Thread 0 Crashed: Dispatch queue: com.apple.main-thread
    0 libSystem.B.dylib 0x8023656a _pthreadkill + 10
    1 libSystem.B.dylib 0x80235e17 pthread_kill + 95
    2 com.apple.FinalCutPro 0xb80bfb30 0xb8000000 + 785200
    3 com.apple.FinalCutPro 0xb80c0037 0xb8000000 + 786487
    4 com.apple.FinalCutPro 0xb80dd8e8 0xb8000000 + 907496
    5 com.apple.FinalCutPro 0xb8145397 spinlockwrapper + 1791
    6 com.apple.FinalCutPro 0xb801ceb7 0xb8000000 + 118455
    Thread 1:
    0 libSystem.B.dylib 0x801402fa machmsgtrap + 10
    1 libSystem.B.dylib 0x80140a67 mach_msg + 68
    2 com.apple.FinalCutPro 0xb819440f CallPPCFunctionAtAddressInt + 206231
    3 libSystem.B.dylib 0x8016da19 pthreadstart + 345
    4 libSystem.B.dylib 0x8016d89e thread_start + 34
    Thread 0 crashed with X86 Thread State (32-bit):
    eax: 0x00000000 ebx: 0x802f74e0 ecx: 0xb7fff9ac edx: 0x8023656a
    edi: 0xb8211640 esi: 0x00000005 ebp: 0xb7fff9d8 esp: 0xb7fff9ac
    ss: 0x0000001f efl: 0x00000286 eip: 0x8023656a cs: 0x00000007
    ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
    cr2: 0x80236560
    Binary Images:
    0x80000000 - 0x8005bff7 com.apple.framework.IOKit 2.0 (???) <69E4FE93-376C-565E-650F-04FAD213AA24> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
    0x8007a000 - 0x800e4fe7 libstdc++.6.dylib 7.9.0 (compatibility 7.0.0) <411D87F4-B7E1-44EB-F201-F8B4F9227213> /usr/lib/libstdc++.6.dylib
    0x8013f000 - 0x802e4feb libSystem.B.dylib 125.0.1 (compatibility 1.0.0) <06A5336A-A6F6-4E62-F55F-4909A64631C2> /usr/lib/libSystem.B.dylib
    0x80364000 - 0x804ddffb com.apple.CoreFoundation 6.6.1 (550.19) <1E97FB1E-9E42-B8EB-E463-5C75315FDA31> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x805d5000 - 0x805e3fe7 libz.1.dylib 1.2.3 (compatibility 1.0.0) <82B2C254-6F8D-7BEA-4C18-038E90CAE19B> /usr/lib/libz.1.dylib
    0x805e8000 - 0x805f4ff7 libkxld.dylib ??? (???) <13F26BB6-C2F7-9D74-933E-09AD8B509ECD> /usr/lib/system/libkxld.dylib
    0x805f8000 - 0x8063eff7 libauto.dylib ??? (???) <85670A64-3B67-8162-D441-D8E0BE15CA94> /usr/lib/libauto.dylib
    0x8064b000 - 0x807cdfe7 libicucore.A.dylib 40.0.0 (compatibility 1.0.0) <96A45E03-2B29-83EB-0FC6-2C932E398722> /usr/lib/libicucore.A.dylib
    0x8082f000 - 0x808dcfe7 libobjc.A.dylib 227.0.0 (compatibility 1.0.0) <DF8E4CFA-3719-3415-0BF1-E8C5E561C3B1> /usr/lib/libobjc.A.dylib
    0x808f0000 - 0x808f3fe7 libmathCommon.A.dylib 315.0.0 (compatibility 1.0.0) <1622A54F-1A98-2CBE-B6A4-2122981A500E> /usr/lib/system/libmathCommon.A.dylib
    0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <211AF0DD-42D9-79C8-BB6A-1F4BEEF4B4AB> /usr/lib/dyld
    0xb8000000 - 0xb81defff com.apple.FinalCutPro 5.0 (5.0) <C6CB6BA8-8BA2-8F0A-4A49-912B00D2FF10> /Users/WhOaGRL17/Desktop/My Stuff/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    0xffff0000 - 0xffff1fff libSystem.B.dylib ??? (???) <06A5336A-A6F6-4E62-F55F-4909A64631C2> /usr/lib/libSystem.B.dylib
    Translated Code Information:
    objc[581]: garbage collection is ON
    NO CRASH REPORT
    ANY HELP AT ALL??

  • Final Cut Pro X Exporting help!?

    I've used Final Cut Pro X before and had no problem sharing/exporting projects and burning them on the dvd's but now it won't work. Everytime I click export movie nothing happens. Or when I put share to DVD I get this error messege "The operation couldn't be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.) The properties info is 1920x1080  , 23.98p. Surround 48kHz. I don't file size is a problem I think it might have to do with having to compress it? I don't know. I use to be able to export it and then having it export on quicktime. I also select the project/timeline and still doesn't work.

    Then obviously your problem is different from that of the original poster. Are you getting the CompressorKit error message?

Maybe you are looking for