I don't have option to create a separate 5 Mhz network

Hello Folks,
I have 2 strange issues. I don't have option in airport utility
to create a separate ssid/network for 5 Mhz in advanced setting tab
and I don't have in the list of countries US.
I have latest firmware and airport utility.

hi,
Check with mange privileges from analysis .if you granted bi admin both bi consumer and author both ll refer implicitly,
Refer: http://varanasisaichand.blogspot.com/2011/03/obiee-11g-security-default.html
thanks,
Saichand.v

Similar Messages

HT5312 when i want to change my security questions i don't have option to send rest security questions ?

when i want to change my security questions i don't have option to send rest security questions ?

You need to ask Apple to reset your security questions; this can be done by phoning AppleCare and asking for the Account Security team, or clicking here and picking a method, or if your country isn't listed in either article, filling out and submitting this form.
The reset option will only appear if you have a rescue email address. Creating one requires supplying two of the answers.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(105986)

I don't have option to register for Apple ID without providing card info (Don't have "None" option). How to proceed?

I don't have a "None" option on Credit card page.
I don't want to enter card details on my daughter iPod.
How to proceed?

Try here. Create an iTunes App Store account without a credit card
iTunes gift cards is another way to purchase iTunes media without a credit card. Just click "Redeem" right side of the iTunes Store window.

Why don't have options under my tool tab in adobe reader x?

I'm trying to edit a pdf but I don't have those options under the tool tab. Am I skipping a step? It's obviously loaded on my computer and I registered our Adobe Acrobat software. What am I missing?

Well, I was in Adobe Reader and then found out that you can't edit in Reader so I went to Acrobat and still couldn't figure it out. I was able to pull up the existing PDF, but I couldn't go any further. I was able to click on the tools on the left of the screen but they wouldn't erase the existing text.

I can't retrieve my contacts from the cloud. I don't have options listed on the instructions to "download"

My phone died and I am trying to retrieve my contacts from the cloud. I can see them in my Cloud app on my new phone, but I don't have the option to download or "start" as the instructions indicate. I don't have a phone to transfer to, so somehow need to retrieve them.

Your post is kind of confusing. You have a new phone and don't have a phone to transfer to?? With the phone that died. If that phone was using Verizon Cloud to back up. Then when you activating Verizon Cloud on the new phone, one of the steps would ask, do you want to transfer from old phone to new phone?
If you had nothing backed up with Verizon Cloud on the old phone there would be nothing to restore to the new phone.
When activating Verizon Cloud on the new phone, only what is currently showing on the new phone will be able to be backed up, along with what is added in the future.

HELP! My iTunes & iPod don't have option for VIDEO???

I have a 30gb iPod and the latest version of iTunes 6.03 (something like that). I downloaded a tv show from iTunes so I can try to put it in the ipod... When I plug it in, the Music and Pictures update by itself BUT the VIDEO doesn't update to the ipod at all eventho the box is checked..
1.)So I go to Edit> Prefferences> Ipod tab. It doesn't give me an option for VIDEO. It only says Music, Podcasts, Photos, Contacts, and Calendars. So I'm stuck right there.
2.) I tried to Click and Drag to my ipod but it doesn't let me do that either. I can drag it anywhere except to my ipod =(
3.) I tried to Right Click on the tv show> Get Info> Option>
(I read that you have to change the Video Kind to anything other than [Tv Shows]. I tried to do that but it doesn't give me that option. I can't select to change it. It's stuck on [Tv Shows])
4.) I even tried to Restore my ipod 2 times. It's a waste of time.
I think my main problem is that I don't have the Video option on my iPod or iTunes eventho I restored and updated 2 times. Maybe if I can figure out how to get the Video option on there then I can figure out how to put the videos on my ipod!
CAN Someone PLEASE HELP ME????

There isn't a "video" option for iTunes, so you can scratch that from your list of concerns.
Huh? What's this a picture of?
Syncing videos to your iPod
and my stuff all plays and transfers just fine.
And you get it onto the iPod how?

I have this following problem in Adobe Premiere Elements 11: Error of export: You don't have permissions to create or delete the output file.

Hey guys,
I have this following problem:
When i export my movie to my desktop from premiere elements 11 it fails and says "Error of export: You are not permitted to create or delete the output file."
This is the first time i had this problem.
I have no ideas to solve this problem ... I don't found it on this page neither in the whole web -.-
I look forward to get requests

S
QuickTime is a requirement for Premiere Elements (any version). Please download and install it so that we can continue this troubleshooting. Among other things, without QuickTime installed, you will not have QuickTime presets in Publish+Share and will not have available to you codecs supplied by that player.
Please right click the Premiere Elements 11 desktop icon and apply Run As Administrator. Please review computer permissions..
In the meanwhile, please reply to all the questions, including
What is the description for your export choice and does it make a difference if your Export Save In location is the desktop or to Video Folder in Documents?
What is a description of your computer resources?
Please consider and supply details need to help us help you.
We want you to succeed.
Thank you.
ATR

Don't Have Permission to Create Nodes

I'm working with the File example and I'm getting the
following error:
Error: MessageManager.createNode : insufficient permissions
to create node
I'm creating the node on a SYNCHRONIZATION_CHANGE event as
follows:
I've got the room set up so that guests are automatically
promoted. Does that not work as far as Node-creating permission?

Hi Ryan,
You can create a new node only if you are owner of the room
or you are promoted to have host role i.e. role = 100 . When you
autopromote someone, that user gets promoted to a role = 50 i.e. a
presenter role. If you do not autopromote , the default role = 10 ,
i.e. that of a viewer.
Hence you need to promote the incoming user further to a role
= 100, merely autopromote won't give him enough permission to
create a new node.
Thanks
Hironmay Basu

Managed to restore Ipod but now don't have option to delete from it

After doing the same thing several times, I finally was able to restore the Ipod and it transferred all the music from Itunes again. Great Cheering! However, I now can't delete anything from the Ipod mini, only add things. Is there a button or is it yet another quirk?

Choose the option for the way you've chosen to synchronize your iPod from those documented on this page; you can change the synchronization option if you want to.
(13775)

HT4623 I don't have this option (software update) in my iPad so how I will update iOS on my iPad

I need to update iOS on my ipad2 but I don't have option software update on my iPad so how I can update it

The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623

How do I permanetly save all my tabs so that each time I open firefox, I don't have to reo all my tabs?

I have 4 tabs that I always use and I would like to know how I save them so that every time I open mozilla all 4 of those tabs are already there so that I don't have to manually create each new tab every time

Firefox can store multiple home pages, set the 4 tabs as home pages, for details see https://support.mozilla.com/kb/How+to+set+the+home+page
Then, in the Options Window, on the general panel, change the setting "When Firefox starts" to "Show my home page"

I Don't have an optin of face time in my IPHONE 4, Please help me how i can install in in my Phone

Dear All,
Please help me to bring Facetime option in my IPhone 4, i don't have option of Facetime in my i phone 4, can you please tell me how to install in my IPHONE 4. I will be very thankful to you for help me on this regard. my contact details are given below,
Thanks
Assad
<Email Edited by Host>

Hi
There is no FaceTime app, if that's what you're looking for.
Check if FaceTime is enabled. Go Settings -> Phone -> FaceTime. Is it On or Off?
You will need to find a contact in your iPhone, tap on it, and you should see 4 boxes in the bottom of the window: Text Message, FaceTime, Share Contact & Add to Favorites. Choose FaceTime, and it should call them via FaceTime. Also, you must be connected to a Wi Fi network in order to use FaceTime

Photoshop CS5(64Bit): "You don't have permission to save to this location. Contact the administrator to obtain permission." I am the administrator and I give myself permission. What can I do to save the file?

Photoshop CS5(64Bit): "You don't have permission to save to this location. Contact the administrator to obtain permission." I am the administrator and give myself permission. What can I do to save the file? This is the user's PC, licensed PS CS5 software and Win 7 OS.

Temporarily save to another folder, until you figure it out.
Just because you are the owner and are the sole administrator, does not always guarantee that you have permission. There are several folders that you can not access no matter how hard you try. As for folders in your document folder, it is more likely a basic permission setting that took on permissions of a copied file. Some folders and files are set to a child/parent default setting, meaning the child folder/file (the one you are accessing) has the identical settings of its parent and when the parent changes, so does the child.
You can alter the parent or the child folder/file.
Right click on the folder/file select properties.
Click on the security tab.
Click on each of the group names and see what permissions are set.
You can then edit a group if necessary.
If it will not allow it, you may need to use the advanced button to create a new copy of the group which should happen when you alter its settings (In other words, you don't have to physically create the copy, it does it for you when you OK the changes)
The administrator should have full access to the folder in the documents folder, if you are listed as an associate of the administrator group your name should also be listed there with full access. The System should also have full access.
All other groups should have reading access only if they exist.

I have a iphone 4 factory unlocked usa but the proximity sensor not work and dont have option to edit the apn.

The proximity sensor in my
Factory unlocked iphone 4 usa not work and not have option to edit the apn for the network.

you'll have to bring it back to the apple store for repair/replacement. Warranty services is done only in the country of purchase, so you'll need to bring you phone to a US apple store.

I don't have the option to create a new table in my database

Hi, I have SQL 2014, for some reason, a few weeks ago I was able to create a new table for my databases, now, I don't have the option to do so, all I get when I right click on tables is "Tables..." instead of "New Table", when I select
"Tables..." it allows me to write my codes but it doesn't save except in a text files witch doesn't want to open when I want to resume my work.
Is there any option in SQL to activate the "New Table" by right clicking on Tables? I have all the rights and permissions available to my use as it's my computer and my own server.
To fix the issue I tried
-Re-installing SQL
-Changed for 4 different versions
-Allowing more than necessary permissions
-Making it public to use (it's only to test it, anyway, I'm in the learning phase)
Any kind of help or advice will be welcome and much appreciated.
Thank you!

I don't know the reason why you are experiencing this, so what I am describing below are just some steps that you can take to diagnose the problem if it is related to a permissions issue.
1. If you are not already on the computer where SQL Server is installed, login on that box and launch SQL Server Management Studio and run it as Administrator.
2. Connect to the Server and open up the object explorer and expand the Security node that is directly under the Sever tab.
3. Under logins, find your login, right-click properties and see what kind of server level permissions you have, and which databases you are mapped to and what kind of permissions you have on those.
It may just be that this is not related to permissions at all, but I can't think of what that would be. To test whether it is a SSMS GUI problem or not, open up a query window and select a database on which you think you have permissions to create tables.
Then create a test table using T-SQL, for example:
create table dbo.MyTestTable( col1 int);

I don't have option to create a separate 5 Mhz network

Similar Messages

Maybe you are looking for