I don't have recovery disk and hard disc is also replaced within 2months.can i get the disc free?

I failed to create a recovery disc (windows 7 64-bit preloaded OS) as the hard disc of my notebook PC of 2000-2121TU/B9K60PA had to be replaced by your service centre (id no.- 4642573737) within 40 days of purchase. I have made request to your customar care to supply recovery disc vide id no.-4685488834 but the person attended my call stated that i have to pay an amount between Rs. 800/- to Rs. 1500/- as delivery charge and that must be through credit card only. I don't have any credit card and I am not willing to pay further for the software i have purchased already but lost due to your product fault. can you help me and tell me what to do in this situation except knocking the door of consumer's protection forum.

Just download and install.
you can find by internet search for "download Lightroom", or click here:
https://creative.adobe.com/products/download/lightroom
Note: trial software is same as licensed software, once you license it.. (I hope you still have the license key).

Similar Messages

  • In fcp7 there is a "close gap" option so you don't have to highlight and move everything every time you delete a small section in the middle of a video. Is it possible to do this in fcpx? I can't seem to find it...Thanks!

    In fcp7 there is a "close gap" option so you don't have to highlight and move everything every time you delete a small section in the middle of a video. Is it possible to do this in fcpx? I can't seem to find it...Thanks!

    This isn't the actual clip, I fixed it by highlighting and moving everything over but it'd still be a good thing to know for the future. This is essentially the situation i'm talking about. I would never use it for something this simple, but when more complicated editing is being done it isn't so easy to just move all the clips over.

  • Just purchased Lightroom (stand alone) and asks for a previous serial number. I don't have one only an students version of photoshop for which I can't find the serial number

    Just purchased Lightroom (stand alone) and asks for a previous serial number. I don't have one only an students version of photoshop for which I can't find the serial number

    If it is asking for a serial number for a previous version then you purchased an upgrade version rather than a standalone version.  You should be able to determine this based on the price you paid.  If you do not own an earlier version then you need to purchase a full version rather than an upgrade.  If you did purchase a full version but acquired an upgrade version then you will need to acquire the full version.
    Contact Adobe support thru chat to help get resolution...
    Get help with orders, refunds, and exchanges (non-CC)
    http://helpx.adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

  • This is a stupid question but I needed to ask because I don't want to go there and not being able to buy it, but can I get the iPhone 5 brought straight there when I go to an apple store?

    This is a stupid question but I needed to ask because I don't want to go there and not being able to buy it, but can I get the iPhone 5 brought straight there when I go to an apple store?

    And I meant go to the apple store physically without preordering it online, and I meant the Southampton one. So could I just stroll in apple store and buy a iPhone 5 in Southampton apple store and buy the iPhone 5 straight away? Because I didn't want to have to wait? I just want to go in and buy it and go out with it, if you guys get what I mean? And felipeV if it is in stock could I just buy it and leave with my iPhone 5?

  • TS3276 I have an old version, 10.5. A few days ago, my Inbox stopped showing new messages received, although they are coming in and show under Messages on Server.  How can I get the messages on the server to go to my Inbox so I can access them?

    I have an old version, 10.5. A few days ago, my Inbox stopped showing new messages received, although they are coming in and show under Messages on Server.  How can I get the messages on the server to go to my Inbox so I can access them?

    Make sure Mail is selected in System Preferences > iCloud

  • I have a new ipad and a iphone 5 which are under same Apple ID. I lso have a macbook that uses an older apple ID. How can I get the macbook to have same Apple ID as the other 2 devices

    I have a new ipad and a iphone 5 which are under same Apple ID. I lso have a macbook that uses an older apple ID. How can I get the macbook to have same Apple ID as the other 2 devices

    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • I have an iphone5 and a macbook pro. How on earth do you get the movies from your iphone onto your macbook pro!!!

    I have an iphone5 and a macbook pro. How on earth do you get the movies from your iphone onto your macbook pro!!!

    ah thanks nick, i have found this sentence a couple of times....
    Turn on iPhone and connect it to your computer.
    How do you "connect"  your iphone to your macbook pro, the bluetooth just doen't work, is there a usb cable?

  • I just installed Readdledocs on my ipod, and now when I launch the app, I get a screen which says "downloading message" and the app freezes and won't do anything else.  How can I get the app to function again?

    I just installed Readdledocs on my ipod, and now when I launch the app, I get a screen which says "downloading message" and the app freezes and won't do anything else.  How can I get the app to function again?
    This happened after I tried to get Readdledocs to open an epub file which I created in Calibre.

    This is a followup to my own posting above.
    Thanks to Dave Sawyer for posting information about re-downloading an app which has been deleted.  I deleted the app from iTunes.  Then, when I synched, iTunes asked me if I wanted the items on my ipod touch copied back into iTunes.  I said yes and then synched.
    Readdledocs is now working again.  It is no longer frozen.  However, I have learned my lesson.  I will download only pdf's from now on.  I don't think it works so well with epub files.  The text reflow feature of Readdledocs is exactly what I need to use for my work documents on my ipod touch.

  • HT1203 Can I share one iTunes account for my iPad and two I phones? If so, how can I get the purchased apps and music on all three devices? Do I need a home computer,

    Can I share one iTunes account for my iPad and two I phones? If so, how can I get the purchased apps and music on all three devices? How do I sync all the devices to have the same music and apps?

    You can set up an iCloud account on each one (the SAME iCloud account using the same AppleID on each) and then sync via iCloud.
    http://support.apple.com/kb/HT5262\
    However, an iCloud backup nor sync contains purchased content - that is available for redownload from the iTunes and App stores (so no need to waste iCloud space storing it for you).
    So, for purchased content, you will have to download it on each device - just use the same AppleID and download each item on each device.
    Without a computer to aid the sync'ing, downloading the purchased content on each device is the only way.
    P.S  audiobooks cannot be re-downloaded once purchased (all other content can be), so without a computer to save, store and move the audiobook files around, you will only be able to put those on one device - the one you first purchase it on.

  • My computer crashed and I had to reinstall windows 7, how can I get the playlist on my iphone onto itunes?

    My computer crashed and I had to reinstall windows 7, how can I get the playlist on my iphone onto itunes?

    It has always been very basic to always maintain a backup copy of your computer for this very occasion. 
    If for some reason you have failed to do this, not good, then you can transfer itunes purchass from the ipod. File>Devices>Transfer Purchases

  • I can create documents in Mavericks Pages and Keynote. When I attach them to an email and send to others also using Mavericks, they can't open the attachments. Why might this be?

    I can create documents in Mavericks Pages and Keynote. When I attach them to an email and send to others also using Mavericks, they can't open the attachments. Why might this be?

    The new Pages v5 (Mavericks) uses a new file format with the same extension name (.pages). Older versions of Pages cannot open these documents unless you first export them as Word (.docx) and send these as Mail attachments. The same is true if you originate an IOS Pages v2.01 .pages document.
    You may be sending to people who chose not to install Pages v5 on Mavericks and continue to use Pages ’09 v4.3 instead — especially for the superset of features that are presently not in Pages v5.

  • When I turn on messages, I can't see my messages.  All I can see is a screen with horizontal lines and a text list of addresses.  How can I get the regular message screen back?

    When I turn on Messages, I can't see my messages.  All I can see is a screen with horizontal lines.  How can I get the regular Messages screen back?

    The same is happening for me. Today I decided to reboot my PC because it was acting up a bit, go figure, and then for some reason at the same time the PC was restarting my macbook froze. I had to do a reboot with the restart button but then all that came up was a gray background and in the middle of the screen was a darker gray folder with a white question mark in the middle of it, blinking. I can't imagine why the restart would've affected my macbook. After finding information on how to fix this, I tried all of the steps that were given about using the mac OS X disk to use the first aid utility to fix it. When using the Disk Utility option whenever I select my hardrive and am in the First Aid tab, the only button I can use is the Verify Disk Permissions. The other three buttons, and namely the most important Repair Disk button, is/are not selectable (grayed out). I then tried resetting the PRAM the way they also said with the command + option + P + R and waited for the second startup sound. After that I gave the Disk Utility a second try, but still nothing. And now if I try to just reinstall the OS completely I can't even select a destination volume on the third step (Select Destination). Apparently this means i'm SOL.

  • INSATLLED NEW HARD DRIVE DON'T HAVE RECOVERY DISK

    Don't have the recovery disk for my laptop

    Hi:
    You can see if you can get a set of recovery disks by reading the info at the link below.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&dlc=en&lc=en
    If your notebook came with Windows Vista or Windows 7 and you can read the 25 character product key on the bottom of your notebook (DON'T POST IT), I have a workaround where you can make your own genuine Vista or W7 installation disk and use the Windows product key on your notebook to activate the installation.
    Just let me know if you have Vista or W7 as the instructions are vastly different.
    Paul

  • Cannot access system after dropping laptop - how to fix (don't have recovery disks)?

    My wife dropped her L305-S5955 Satellite, Vista32 OS. Miraculously, case is perfectly fine, as is screen. Computer still powers on, too. At first it beeped - just now finding out that this is the "code" as to what is wrong, but we didn't know it then, and we can't remember how many beeps it was. Tried starting in safe mode and running the "Startup Repair", but the message "Windows cannot repair this computer automatically" and "startup repair cannot repair this computer authomatically"....viewing the diagnostic and repair details shows that a number of tests were run, and all of them but one were completed successfully (one failed). Successful was: "check for updates", "system check disk", "disk failure diagnosis", "disk metadata test", "target OS test" and "volume content check".  The "root cause found" was "No OS files found on disk"....the "repair action" was "partition table repair" and the "result" was "failed". I read on another bulletin board that one could check whether one's hard drive was good at the command prompt by typing "chkdsk"....this was one of the first things I did, I should mention, and when I did it, it seemed to pass.
    Ideally, of course we would like to have the thing working just as it did before, with all the files intact...but since we can't even get the OS running (she never did make those homemade bootable CD Roms I'm now finding out Toshiba buyers are encouraged to make), she will settle for just getting the computer working again and ultimately losing her files (we believe we have copies elsewhere of the important photos, etc)...but, I have 2 concerns:
    1) I don't want to do this step of reinstalling the OS and overwriting everything IF there is ANY way to not have to do this (ie, pulling the hard drive and getting the files off some other cheap way), and
    2) that there might be more than just ONE problem here (bad OS)....maybe the hard drive somehow IS also damaged...or something else is. It's true all the tests I mentioned seemed to pass my hard drive, but most of the comments on various bulletin boards I've checked give me pause here...they all seem to almost guarantee my hard drive is toast....some advise to find the make of the hard drive, go their website and download the special, specific diagnostic test software to thoroughly test the hard drive...could it be that doing this could in fact reveal a problem that other tests thus far have not..?! I'm not incredibly computer literate and Hitachi page seemed a bit confusing to me...not sure what to download. I also should mention that when I ran the "Windows Memory Diagnostic Tool" (also built into the Satellite, as one of the several recovery tools on the "System Recovery Options" page), it apparently passed that, too.
    When I try to run "Windows Complete PC Restore", I get the mssg that "windows cannot find a backup on this computer"...."a valid backup location could not be found".
    I am currenty trying to run "System Restore" (many different dates were shown)....but is it supposed to take a very long time (several hours or more??)....it has been going for 10 minutes already, saying it's restoring files, but 
    my wife said she tried this too, and that it ran for about 2 hours but she accidently bumped the computer and it stopped running (so we're not sure if it was successful or not).
    Lastly, I wanted to mention that I already tried removing the back plates and checking the memory cards and hard drive to make sure they were securely seated (they seemed to be)...I even pulled them out slightly and reseated them to be sure....someone on a buletin board mentioned this can be the cause sometimes of things not loading after physical shock such as being dropped.
    Hopefully this is enough info that someone might have a very good idea what the computer's issue is, and how to best fix it. Should I buy the bootable OS disks from Toshiba (someone wrote that they can be had for $25 or so?). Or can this be downloaded from Microsoft? It seems like it should be FREE, since it was already paid for when we bought the laptop! Should I use the "TOSHIBA Recovery Wizard" ? Again: if absolutely necessary (how to 100% verify this?), we'll overwrite the hard drive and lose our files, but I just want to be sure...and also that I'm not trying to load it onto a hard drive with some hidden problem.
    Many thanks in advance...

    Update:  I tried the "Toshiba Recovery Wizard" after everything else either fizzled out or hung up. After going all the way thru the recovery process (up to 100%), I finally got an error message.....it didn't work. And now, when I fire up the computer, I don't even get to that menu with the recovery options....the only thing I can boot into is the screens with the various ways to run your OS (in "safe mode", "safe mode with networking", etc).
    I'm not a techie, but I'm guessing at this point, the part of my hard drive that got damaged in the fall was, at the very least, the partition with the recovery data. Couple that with the fact that this cheapo Toshiba laptop didn't even come with recovery disk (or ANY kind of disk, even basic installation software!), I'm screwed: I don't see any way to get a workable computer now without some kind of disk to boot from. So NOW my concern is more about spending the $$ for a new OS and THEN finding out the hard drive has other problems too...is broken in some other way to boot.
    How to check this? As I said, I did run "chkdsk" back when I could get into the recovery menu and run the fix-it programs. It didn't note any problems. Thinking of taking this opportunity to upgrade to Windows 7 from Vista (which I never liked), but I have to know that the computer is otherwise ok....how to be sure? Help!!

  • I have lost Lightroom 5.6 due to a hard drive crash. The old hard drive has been replaced. How can I get LR5 back? I don't have a disc. I still have my LR4 disc and key. I have another adobe  key, but don't know if it relates to LR5.

    I have lost Lightroom 5 due to a crashed hard drive. I don't have a back up disc, and I dont think I have a key. I have a an adobe key recorded but don't know if it relates to LR5. I have an LR4 disc and key. LR5 is still intact and running on my laptop, but I need to use LR% on my desktop PC. I need an address to try a download so that I can try the key which might fit it. Any ideas how I can transfer the program (with key) from my laptop? Any other ideas?
    John Carden <[email protected]>

    Just download and install.
    you can find by internet search for "download Lightroom", or click here:
    https://creative.adobe.com/products/download/lightroom
    Note: trial software is same as licensed software, once you license it.. (I hope you still have the license key).

Maybe you are looking for

  • Insufficient Authorization error while creating objets in IR

    Hi all, I have logged in IR with admin user , The user has all the roles(developer and sld). But still while creating any namespace or other design objects it gives the below error- Insufficient authorization to create objects ............ I have gon

  • Windows cannot initialize the device driver for this hardware. (Code 37) for Ipod Nano

    I have a Ipod Nano for 5 years and Saturday I was updating the latest Itunes and when I connect my Ipod to my PC I got a Code 37 error. I uninstalled the new itunes and put back the old itunes but my Ipod is still having the same error.  I did the sa

  • Multiple host adapter framework caches in PI 7.1

    When I go look at the caches in my PI system, I get multiple host adapter framework caches.  That is, when I navigate to http/<host>:50000/dir, then select "Administration" in the upper right hand corner, and then select "Data Cache Overview"  I see

  • Printing in Smartforms

    Hi,      I have totally three pages in my smartform.In which the first page consists of line item details from a quotation, second page consists of details for the first item in the first page and the third page consists of remaing details of the sam

  • Colours are different in PS than everyother program on my computer. How do I fix this?

    So I just recently started with PS and this is a big problem since I mainly use it to paint and it would be great to know that what I paint is what actually will become the picture When I open a BW picture it turns out sepia in PS, and likewise, savi