I don t hear the track in adobe audition CC - non sento la traccia in adobe audition cc

come faccio?
come faccio a resettare il programma?

Resetting everything probably won't help. If you load a file and try to play it, does the cursor move? If it does, then you have a connection to your sound device, but the output isn't correctly routed to or from it. If the cursor doesn't move, then you don't have a proper connection to your sound device, and you will have to reselect it in Preferences>Hardware.

Similar Messages

  • My iphone dosen't doesn't make key tone sounds anymore when I write a text message or when I want to dial a phone number I don't know how to fix this problem, I don't hear the clicking noise anymore does anyone know how to fix this problem?

    My iphone dosen't doesn't make key tone sounds anymore when I write a text message or when I want to dial a phone number I don't know how to fix this problem, I don't hear the clicking noise anymore does anyone know how to fix this problem?And all the sounds on my phone are on, even the keyboard clicks.

    Try restarting your iPhone by holding down the on/off and the home buttons at the same time until you see the Apple logo, double check the volume button just in case.  If you still can't hear the tones go into your settings>sounds and make sure the options are on. 

  • TS1008 when the usb mic (Blue) is connected I can't hear the track play

    when the usb mic (Blue) is connected I can't hear the track play. Track plays fine when mic not installed...hoping this is a typical set-up issue easily resolved.

    Did you choose the the output in Garageband > Preferences > Audio midi?

  • Why if i want to listen to music and i'am not using headphones i don't hear the music coming from the mac

    why if i want to listen to music and i'am not using headphones i don't hear the music coming from the mac?

    that means that your mac still thinks the headphones are plugged in.  Try inserting and unplugging the headphones from the jack several times and see if it sets the toggle switch back.  If not, try sticking a toothpick or something sturdy and narrow in and see if you can manually flip the toggle switch.  That method is a last resort, you do not want to break anything off inside the headphone jack.

  • TS1741 I don't hear the music on my I pad

    I don't hear the music on my I pad2 with remote, it says It is playing but no sound.

    what do you mean by with remote?
    and provide more info does it not play audio when you play music
    or
    does it not play audio at all no matter what you do?

  • I don't hear the call waiting distinctive ring/tone??

    Both my best friend and I have Verizon wireless. When i'm on a call and she calls me she can hear the call waiting distinctive ring however when i call her and she's on the phone i don't hear it.
    My question is why is that possible?

    aiden17 wrote:
    Yes it does help. I really dont like it and i have been wanting to get that removed, the distinctive ring. I have searched to see if its possible and alot of information contradics one another.
    Do you think eventually verizon will remove it permantely across the board?
    I'm confused.  In your OP you say you don't hear it.  Now you say you would like it removed.  If you don't want it AND don't hear it, what's the problem?

  • I don't hear the music and video sound anymore! (only the voice over) Can someone help me?

    I am making a video, and now I only hear the voice over, when I play the video in Premiere Elements 12..
    Can someone help me?

    marcolk
    What computer operating system is your Premiere Elements 12 running on? Have you updated 12 to the 12.1 Update, using an opened project's Help Menu/Update?
    To your immediate problem....there is a known issue with Premiere Elements wherein the sound is lost on numbered audio tracks and soundtrack when narration with the program's Narration Tool is added to the project. I suspect that you have fallen into this issue reported by several, but not all.
    A remedy has been given by the ID Llamadude 99 and this remedy as well as some modifications of it have worked for most to overcome the problem.
    Please read the following for the details, and then let us know the outcome.
    http://www.atr935.blogspot.com/2014/06/pe12-audio-losses-after-narration.html
    We will be watching for your follow up.
    Thank you.
    ATR

  • Cant hear the tracks on my pc using i - tunes

    hi....the volume has stopped working when i play a file through i-tunes............although it plays whilst listening to songs via other programs. can anyone help please

    I've been having the same problem for over a month now and i don't know how to fix it. hte diamond thingy moves as if the song is being played, my volume is up... but I can't hear a thing. I know my volume is working because i can hear other things. I tried downloading the new version of itunes but that didnt work either. I am not really computer-friendly and do not know how to use this chat very well so if you figure out how to solve it, please email me at [email protected] Thank you!

  • When I open USS Hornet (CVS-12) Web page I don't hear the sound of Splash down. How do I turn this on?

    When I open Explorer Browser at USS Hornet (CVS-12) Web page I should hear sound of Splash Down. How do I turn this on with Firefox?

    Wish I could answer, but I'm coming on for the same question, essentially.
    This pop-up window appears randomly for me - sometimes without even opening Safari.  Same exact web address as mentioned by sherryfromlakeview above.  A new window appears with the /*OK*/ in the top left corner, the remaining page blank.
    Same question -
    How do I permanently get rid of this?

  • Don't hear the woosh or new mail

    I posted this issue before with limited results. Then I went to the Apple store to fix the issue.
    "Genius" helped because the sounds were heard for several weeks. Now all of a sudden they are gone again!
    Help!

    In the Mail application go to the Mail menu and select Preferences. Under the General tab, there should be an item New Messages Sound. Make sure the sound you want is selected.
    Best of luck.

  • My phone is on wifi in my house and i don't hear the phone ring on calls or text messages most of the time. help

    I miss most calls and texts help with settings. some calls ring and some dont and we have weak signal in our area. and have wifi at home. and some calls dont ring and most text dont signify when they come through. help i am lost.

    Check to see if the mute switch is not set to mute.
    After that, check to see if Do Not Disturb is on. Lastly, if you have weak signal at your home, this could be what is causing you to miss calls.

  • Why can't I hear the receiver of my call unless it's on speaker

    Every time I make a call the receiver of my call picks up but I don't hear the dialing or anything on my end.  The screen indicates that the call is in progress but there's dead air on my end.  Only when I press speakerphone i can hear the person on the other end.  The phone is only 3 weeks old.

    Have you removed the plastic protective film that is on the iPhone when it was shipped?

  • Why can't  attendees hear the sound that is embedded in my PowerPoint slide?

    I have sound embedded in a PowerPoint presentation.  I can hear the sound on my computer but the attendees or participants don't hear the sound.  What do I need to do so that they will also hear the sound.

    Audio on your computer is not transmitted via screen share. I suppose you could hold a mic near your computer speakers to broadcast the audio.
    You can also try uploading the PPT(X) to the Share pod in Connect and see if the audio uploads with it, but it may not.

  • When making a phone call, can't hear the ringing sound

    On my iPhone 5s, when I'm calling someone, I don't hear the usual ringing sound until the person picks up. I'm not talking about the touch tones when dialing a number, nor am I referring to the ring tone when I have an incoming call. Simply the every-two-seconds ringing indicator once you've dialed a number, before the person picks up. Once someone picks up, the call quality is fine.
    This started happening randomly this afternoon. I've had the phone for about a month; currently on iOS 7.1.1.

    Picture is just for instructional purposes...

  • Don't hear ringing when making call

    Hi,
    Recently when I make a call I don't hear the call ringing the other person.  It's fine once the other person picks up but I just don't hear the ringing so I never know if it's actually trying to connect or not - any suggestions?  Anything I've done in settings etc?
    Thanks

    Forgot to say, sorry, it's an iPhone 4s
    Thanks!

Maybe you are looking for

  • Problem during grn for scheduling agreement

    Dear Pals,                 I have done scheduling agreement with doc.type LP. I have maintained schedule lines also. While doing GRN for that, it is throwing an error                              " PU ordered quntity exceeded by 300 ea: 3000000200 "

  • My back two speakers aren't producing any sound when using iTunes 7

    I've only noticed this problem since upgrading, and it doesn't happen when I'm watching movies/listening to music with other programs, and I was wondering if anyone else has had this problem. I have a 5.1 setup, so two in the front, two in the back,

  • Query Explain Plan Help

    I am running the following query against my database SELECT p.ID   FROM rap_counterparties cou,        rap_presentation_cou_ratings pcr,        rap_presentation_states sta,        rap_app_user_profiles aup,        rap_presentations p WHERE cou.unt_id

  • After upgrade to Win 8, the key's has changed

    After upgrade to Win 8, the key's has changed, for example, when i am trying type @ but the key has changed as ". so please help me to rectify the problem.

  • Synchronizing TOC Style issue[CS4][js]

    Dear All, When i synchronizing TOC style in group of documents thru myBook.synchronizeTableOfContentStyle  = true; myBook.synchronize(); it will synchronize perfectly to all documents if TOC style exists in first document in that batch, if its not (i