I don't know how to edit a html document
I know how to CREATE a html doc using MSWord but don't know how to edit it once it's done. Is there a Firefox add on or plug in that lets one do this? Or is a different program needed.
Specifically, I had a MSWord doc with several jpeg images and, when I converted to html, all were stripped out and I want to put them back in.
How?
I don't know either, but this is the forum for the 5g iPods, you may want to post in the Nano forum.
Similar Messages
-
I need to know how to edit a PDF document?
I need to know how to edit a PDF document?
Preview has limited PDF editing capability. You can get a lot more on:
http://www.pdfescape.com/
or with Wondershare's PDF Editor.
Adobe Acrobat Pro is the most expensive solution.
Since you posted under iMac PPC forum, which is for iMacs that can't run any operating system newer than August 28, 2009, I can't say specifically what the capabilities of your version of Preview are. Go to Apple menu -> About This Mac. If you have an Intel, you do not have a PPC. If you have a G5, G4 or G3, you posted to the right forum, and just need to find the version of Preview you have in Applications folder. -
looking to edit the final frame which is the the "credits" section. I have already converted the trailer. Is it too late to correct some nserts in the credits?
Thanks to all.If by "converted" you mean that you've converted the trailer to a normal project using the menu option File>Convert to Project, then YES it is still possible to edit the Credits Title.
In the converted project, double-click on the blue Title bar that sits above the background clip. In the Viewer, double-click on the text you wish to change (or highlight text by dragging over it). Now you can replace the highlighted text by typing in the new text. You can also change fonts and font colours.
It's always good practice to duplicate the Trailer before converting it. To do this, while in Project Library view, click on the Trailer name in the Library then select File>Duplicate Project. A copy will appear in the Library with the same name as the Trailer, but with the number 1 appended. You can rename this copy as desired. Now, convert the duplicate to a standard project and continue with your editing as required. You now have the original Trailer in template form (which can be further edited), and can duplicate it again if required.
John
EDIT: Regarding my first sentence - just noticed that you did mention "converting it to a project" in you topic header. Sorry!
Message was edited by: John Cogdell -
Mac Book Pro and not Intel Imac[ don't know how to edit my post?]
I have Mac OS X version 10.6.8 and the screen is freezing up and/or somewhat crashing when I use my old version of imovie. I say old version which is hd 6.0.3. I also have the new version but I find the old much easier to use. New to me is imovie 09, version 8.0.6. Also, I have a red tint to my screen that has been going on for some time and I think that I need to replace the inverter. I have that part but I have not set down to repair and replace. I have just learned to live with the red tint, that is until everyting started acting up. Any one have any ideas as to what might be going on? Thanks in advance!
What system are you running on your Mac? Does it meet the requirements listed in this Apple doucment: iCloud: System requirements
Happy Holidays -
When I use Photoshop CS 6 to edit video, I don't know how to change video speed after I converted the clip to smart object? The clip color turns purple and it only allows me to add motion but not change the clip duration and speed anymore.
Thanks for the reply and as a work around method I used the Photoshop to do all the adjustments then export the video to iMovie to finish the final cut. I also have a problem to paint or clone on a blank video layer created in Photoshop. It tells me the time is beyond the target frame time, I don't understand the message. Can you explain to me what did I do wrong? Thanks a lot!
John Wang
801-3618742
[email protected]
http://johnwanggallery.shutterfly.com -
First time using don't know how to insert the video to start editing
first time using don't know how to insert the video to start editing
First thing you should know is that After Effects is not a video editor. Premiere is for putting shots together to tell stories (which is editing), After Effects is for creating those shots (compositing and visual effects) and creating motion graphics.
To use AE, start here: Getting started with After Effects -
Hi my name is Catherine I have downloaded digital editions and a book to my PC but wish to read this on an iPad. I have downloaded Digital Editions on the iPad and don't know how to authorize it. Will the book automatically download onto the iPad once tihis is done and I open my account on the iPad?
YOu can also use Bluefire Reader for reading books that need an Adobe ID. There are several ways to transfer a book to your iPad. One way is to email the acsm file, open the email on the iPad, and "Open in ... ". Another way is to use an app like Dropbox. The third way is to connect your iPad to your computer, open iTunes, select the iPad, and under Settings select Apps. Scroll down to the File Sharing apps, select the app you want the book on, on the right select Add, navigate to where the book is on your computer, and select it. Open the app on your iPad and it should load.
-
Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don’t know how indesign can do this action.
set the wake-on lan on the main computer
The laptop's too far away from the router to be connected by ethernet. It's all wifi.
No separate server app on the laptop, it's all samba
The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
Last edited by saft (2010-03-18 20:38:08) -
I have a new ipad and have used the community to answer questions for myself. Your help has been great! I don't know how you got my sailsalot name from my Skype account but I signed in with you as "gags76" and got help with my new ipad. I discovered I used a different Apple id and password on my ipad from my computer (imac) and changed that. My e-mail is **********. Could you email me if there is something I should do at my end. I have to use itunes to sync with my ipad so I have been going back and forth between the two. Should I sign in with my proper Apple id on my ipad?
<E-mail Edited by Host>sailsalot wrote:
I have a new ipad and have used the community to answer questions for myself. Your help has been great! I don't know how you got my sailsalot name from my Skype account but I signed in with you as "gags76" and got help with my new ipad. I discovered I used a different Apple id and password on my ipad from my computer (imac) and changed that. My e-mail is Could you email me if there is something I should do at my end. I have to use itunes to sync with my ipad so I have been going back and forth between the two. Should I sign in with my proper Apple id on my ipad?
Yes -
Hello
Simple problem - don,t know how to solve it.
With Premiere CC when I try to do a selection (click... drag... release the click) very often it stop way before the end of the move I'm swinging the Magic Mouse. I taught that the mouse clicking was defective and went to get a new Magic Mouse after lots of frustration. Today, I have an edit to do it it does the SAME thing !!
I was like ????#$%?&*(???
Opened all the lights and taught I've trow the new mouse to the garbage and was using the defective mouse again... no !! - ??
Actually, the bran new mouse is doing the same thing. What I understand after investigating on the motion and watching carefully my fingers !! - is that when I click I have to keep my finger at the EXACT same place on the mouse... drag and release and it's fine. If I click by pushing on the mouse and my finder is moving of a 1/32th of a millimeter, it will release and my selection will be to redo. You can understand my frustration ! - 75$ later... same problem, but I know that if I click with about 5 pounds of pressure and trying to pass my finger through the plastic of the mouse, it you stay steady and make it !
The problem is that scrolling is enable while clicking and it bugs.
How to disable it ??
Simple question - can't find the answer !Helllooo !?
sorry but the Magic Mouse is just useless with the new Adobe Premiere CC and since I'm not the only one but can't find answer this is really disappointing. This mouse is just fantastic and now I have to swap from a USB mouse to the Magic Mouse every times I do some editing. My USB mouse if hurting my hand somehow and I want to got back to the Magic Mouse asap. Please - for sure there is a simple solution !
Thanks !! -
Just purchased a Time Capsule. Had to call Comcast to disable the WIFI and have internet connection. The time capsule though blinks amber and the Airport Utility shows blinking amber light and has a red circle with the number 1 in it. After connecting, my computer tried doing a backup for the first time and it appeared that it was backing up and finished although I don't know how to check to make sure that it did backup. How do I check and shouldn't the light on the time capsule be blinking green and the airport utility show green?
TM will show it has done a backup.. Look at the info.. when was the backup completed??
If you want more details install the widget.
A1 here.
http://pondini.org/TM/Troubleshooting.html
The time capsule though blinks amber and the Airport Utility shows blinking amber light and has a red circle with the number 1 in it.
There is an error.. probably trivial.. firmware update, default password..
Open the airport utility and find out what the error is.
Simply click the TC and see status in the summary page.. it will list all the errors and what you should do.. fix or ignore them. ie this TC has an error.. default password.. I chose to ignore.. when I "fix" the problem the LED goes green.
Here is additional TC.. it is blinking amber with faults.
Click the fault. eg default password.
You can ignore or edit .. if you click edit it will take you to the full setup where you can change the settings.
I ignored my errors and now it is green.. -
I don't know how to get it online?
I try to export to HTML and from there I don't know how to get HTML (which is a little off anyways, doesn't look the same as it does on Muse) onto the actual site? It just pops up in a window, not online but as a file on my browser window. It's in a folder I think somewhere on my computer, but I don't know how to make it visible on the website.
I tried to upload to FTP but that doesn't work at all. I got a 404. I imagine FTP upload is easier, but when I tried it didn't work a bit.
Also I don't know how someone who doesn't have Muse can then edit the website? I'm finally in the home stretch, trying to get the site live--NOT on buisness catalyst I have a site already I'd like it on.
Thank you in advanceYou can use either of the following options to upload your site to a third party host.
- Publishing a site to a third-party host provider using the Upload panel - http://www.adobekb.com/launching_pt02.html#publishingsiteto3party
- Using a third-party FTP client to upload assets to a hosted Muse site - http://www.adobekb.com/using_3rdparty_ftp.html
Thanks,
Vinayak -
Can't back up my Iphone5 to my macbook pro, it tells me it may be corrupted, also I don't know how to delete the old backup to redo it
Hi Caveman337,
Welcome to the Support Communities! The resource below will explain how to delete an old iTunes backup. Before you do this, I would suggest creating an iCloud backup of your iPhone.
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
http://support.apple.com/en-us/HT203977
Back up using iCloud
If you're using iCloud, it can automatically back up your content. Use these steps to turn on iCloud Backup:
Tap Settings > iCloud > Backup. If you're using iOS 7 or earlier, tap Settings > iCloud > Storage & Backup.
Tap iCloud Backup to turn it on.
Tap Back Up Now.
After you turn on iCloud Backup, iCloud will back up your content automatically. You can return to this screen to see when the last back up happened.
Create and delete iPhone, iPad, and iPod touch backups in iTunes - Apple Support
http://support.apple.com/en-us/ht4946
Where your backups are stored
The folder where your backup data is stored depends on your computer's operating system. Make sure the backup folder is included in your data-backup routine. iTunes places the backup files in these places:
Mac: ~/Library/Application Support/MobileSync/Backup/
The "~" represents your Home folder. If you don't see Library in your Home folder, hold Option and click the Go menu.
Delete a backup
If you want to delete a backup created by iTunes:
Open iTunes Preferences:
Mac: Choose iTunes > Preferences.
Windows: Choose Edit > Preferences. Learn how to turn on menus in Windows 7 and 8.
Click Devices. (The iOS device doesn't need to be connected.)
iTunes will show the phone number, International Mobile Equipment Identity (IMEI) number, and serial number of the backed up iPhone when you position your mouse pointer over a backup. (Only the serial number will be shown for iPad and iPod touch). You can use this to find the backup you want to delete.
Select the backup you want to remove.
Click Delete Backup.
When prompted, confirm that you want to remove the selected backup by clicking Delete Backup.
Click OK to close the iTunes Preferences Window.
Backups that have a date and time stamp in the backup name are copies of backups created by restoring the iOS device. The date and time in the left column are when the restore-from-backup occurred. The date and time in the right column are the last synced date; this shows how current the data is.
I hope this information helps ....
- Judy -
in Iphoto i dragged a group of photos into a folder on the desktop, they went in as thumbnails and i don't know how i did that. can anyone help me do that again
Don't you mean Photos or are you still using iPhoto with 10.10.3?
Normally one gets the preview version of a photo or the edited version if it's been edited when dragging from a thumbnail to the Desktop. Don't know how you would have gotten small thumbnail versions. -
Gantt chart: Don't know how to use the tooltipkeys and toolkeylabel
I have a problem. Don't know how to use the tooltipkeys and toolkeylabel. I used jquery to select the gantt bars and on mouse over i was getting the task id "tid" then passing it to adf bean with serverlistener and showing a popup that is adf component with javascript. For positioning of the popup I used a button that has width and height 0 and has position absolute and gets the coordinates of the mouse.
"div[et]" is a jquery selector that selects all the elements that have attribute et. I noticed that all the bars have that attribute as a few other attributes as well "part"...
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
xmlns:dvt="http://xmlns.oracle.com/dss/adf/faces">
<af:document title="untitled1.jsf" id="d1">
<af:resource type="javascript" source="https://ajax.googleapis.com/ajax/libs/jquery/1.7.0/jquery.min.js"/>
<af:resource type="javascript" source="resources/js/home.js"/>
<af:messages id="m1"/>
<af:form id="f1">
<af:commandButton text="commandButton 1" id="cb1" inlineStyle="visibility:hidden; width:0; height:0" />
<af:popup id="noteWindow" contentDelivery="lazyUncached" binding="#{homeBean.popup}">
<af:noteWindow id="popupWindow">
<af:panelFormLayout id="pfl2">
<af:panelLabelAndMessage label="Task id" id="plam5">
<af:outputText value="#{homeBean.taskId1}" id="ot64"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="Start Location Name" id="plam6">
<af:outputText value="#{homeBean.startLocation}" id="ot7"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="Stop Location Name" id="plam7">
<af:outputText value="#{homeBean.stopLocation}" id="ot8"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="tasktype" id="pla2m7">
<af:outputText value="#{homeBean.taskType}" id="ot9"/>
</af:panelLabelAndMessage>
</af:panelFormLayout>
</af:noteWindow>
</af:popup>
<af:serverListener type="jsServerListener" method="#{homeBean.serverEventHandler}"/>
<dvt:schedulingGantt id="gantt1" value="#{bindings.PersonView1.schedulingGanttModel}" var="row"
startTime="2011-07-04 00:00:00" endTime="2011-07-04 23:00:00" summary="gsg"
showMenuBar="false" showToolbar="false" iconPlacement="left"
showTasksAsDailyBar="false">
<f:facet name="major">
<dvt:timeAxis scale="days" id="ta1"/>
</f:facet>
<f:facet name="minor">
<dvt:timeAxis scale="hours" id="ta2"/>
</f:facet>
<f:facet name="nodeStamp">
<af:column sortProperty="#{bindings.PersonView1.hints.PersonId.name}" sortable="false"
headerText="#{bindings.PersonView1.hints.PersonId.label}" id="c1">
<af:outputText value="#{row.PersonId}" id="ot1">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.PersonView1.hints.PersonId.format}"/>
</af:outputText>
</af:column>
</f:facet>
</dvt:schedulingGantt>
</af:form>
</af:document>
</f:view>javascript:
$(document).ready(bindEvents());
function bindEvents() {
$("div[et]").live('mouseover', function (e) {
$('#cb1').css("position", 'absolute');
$('#cb1').css("top", e.pageY-4);
$('#cb1').css("left", e.pageX);
var popup = AdfPage.PAGE.findComponentByAbsoluteId("noteWindow");
var element = AdfPage.PAGE.findComponent("f1");
var taskIdToPass = null;
if ($(this).attr("tid") !=undefined) {
taskIdToPass = $(this).attr('tid').toString();
} else {
taskIdToPass = $(this).parent().attr('tid').toString();
var param = { taskId : taskIdToPass };
AdfCustomEvent.queue(element, "jsServerListener", param, true);
if (!popup.isPopupVisible()) {
var hints = {};
hints[AdfRichPopup.HINT_LAUNCH_ID] = "cb1";
hints[AdfRichPopup.HINT_ALIGN_ID] = "cb1";
hints[AdfRichPopup.HINT_ALIGN] = AdfRichPopup.ALIGN_AFTER_START;
popup.show(hints);
}).live("mouseout", function () {
var popup = AdfPage.PAGE.findComponentByAbsoluteId("noteWindow");
popup.hide();
};My bean that is session bean:
package view;
import oracle.adf.model.BindingContext;
import oracle.adf.model.binding.DCDataControl;
import oracle.adf.view.rich.component.rich.RichPopup;
import oracle.adf.view.rich.render.ClientEvent;
import oracle.jbo.ApplicationModule;
import oracle.jbo.Key;
import oracle.jbo.Row;
import oracle.jbo.RowSetIterator;
import oracle.jbo.ViewObject;
public class HomeBean {
private RichPopup popup;
private String taskId1;
private String startLocation;
private String stopLocation;
private long taskId;
private String taskType;
public HomeBean() {
super();
public void serverEventHandler(ClientEvent clientEvent) {
String taskIdString = clientEvent.getParameters().get("taskId").toString();
this.taskId = Long.parseLong(taskIdString);
DCDataControl dc1 = BindingContext.getCurrent().findDataControl("AppModuleDataControl");
ApplicationModule am = dc1.getApplicationModule();
ViewObject vo = am.findViewObject("PdTrfDayView1");
RowSetIterator rowSetIterator = vo.createRowSetIterator(null);
Row[] rows = rowSetIterator.findByKey(new Key(new Object[] {taskId}), 1);
Row row = rows[0];
this.taskId1 = row.getAttribute("PdTrfDayId").toString();
this.startLocation = row.getAttribute("StartLocation").toString();
this.stopLocation = row.getAttribute("StopLocation").toString();
this.taskType = row.getAttribute ("PdTrfTypeId").toString();
RichPopup.PopupHints ph = new RichPopup.PopupHints();
vo.closeRowSetIterator();
public long getTaskId() {
return taskId;
public void setPopup(RichPopup popup) {
this.popup = popup;
public RichPopup getPopup() {
return popup;
public String getTaskId1() {
return taskId1;
public String getStartLocation() {
return startLocation;
public String getStopLocation() {
return stopLocation;
public String getTaskType() {
return taskType;
}I am wondering If i can use setCurrentRow on the iterator that i create and use it for displaying on the popup instead of binding startLocation and stopLocation to the bean and if there is any benefit of that at all...
Edited by: 897833 on Nov 24, 2011 11:37 AMHi,
To use tooltipkeys and tooltiplabel in gantt, you can add following code in managed bean
public String[] getTooltipKeys()
return new String[]{"columnA", "columnB", "StartDate", "EndDate"};
public String[] getTooltipLabels()
return new String[]{"A", "B", "Start Date", "End Date"};
where , the string array in the ToolTipKeys represents the columns, of the table you have in the gantt component , and the string array in TooltipLabels displays the label you want to display for the table columns.
In the jsff, you could call the bean methods as follows:
tooltipKeys="#{GanttBean.tooltipKeys}"
tooltipKeyLabels="#{GanttBean.tooltipLabels}"
Maybe you are looking for
-
Posting a physical inventory document
Hi Experts, My colleague was posting a physical inventory doc through transaction MI07 last month, January. However, we got an error which says period 012/2009 is not open for account type S and the G/L account. I noticed that the posting date of th
-
SMS_SRS_REPORTING_POINT - Error retrieving folders with SCCM 2012 and SQL Server 2008 R2 SP2
Hi: According to all the Reporting Services logs my Reporting Point was setup correctly. When I try and run any report I see the entries below in the srsrp.log on the SQL Server. The report names show up in the Console but when I right any of the l
-
LR4 won't install. Error message
I just bought LR4 and it won't install. Error message reads: Operation could not be completed. (com.apple.installer.pagecontroller error-1.) Couldn't open "Adobe Photoshop Lightroom 4.pkg". My operating system is: Mac OS X Version 10.5.8 Please advi
-
Bing takes over Firefox, didn't download it, don't want Bing
Windows 8.1 FF 27.0.1 FF is set as default browser, with tabs from previous session set to open. Bing opens browser when I start computer and adds itself to whatever tabs are set to open. This has been asked a number of times, and I read as many answ
-
Formatting code with lots of spaces
Every now and then (but very rarely gladly) dreamweaver is formatting my code and adding LOTS of spaces. 1 extra space between each line of code and sometimes more lines it seems. I can use Apply Source formatting to get the CSS code fine but for the