I don't know my serial numbers for QT Pro.

I have 3 serial numbers for QuickTime Pro but don't know how to find them on your website anymore. I recently bought a Macbook Pro and wanted to install QTP on it using one of my serial numbers. Please help.

Log in at the Apple Store using the same ID as your purchase and click the "downloadable software history" link to review your purchases.

Similar Messages

SERIAL NUMBERS FOR ASSEMBLY ORDERS

hI,
I would like to know, how serial numbers for Assembled products be assigned .
If possible, please explain it in details as I'm in different module altogether.
Regards
RD

Hi Durai,
1. First You need to assign the Serial number profile in Material Master under Plant data2.
2. System will create serial numbers at the time of production order release.
3. a) In QM point of view under Inspection type active tick mark in Serial numbers.
b) Your MIC should be single result recording and Sample size should be 100%.
C) with r. to above you can record the result as well as stock posting done serial number wise.
Revert further clarification.
Regards,
S.Babusingh

Missing Serial Numbers for CS4 COmponents & Acrobat X Pro

Greetings!
I installed CS5.5 on my 32-bit system, which means I had to install the included "complimentary" CS4 copies of After Effects & Premiere Pro. As stated in one of the Adobe troubleshooting sections I read, the CS4 components require a separate CS4 serial number. As also stated in that same section, Acrobat and CS products have different serial numbers. Unfortunately, I was only given one serial number, and that one was for CS5.5. See image below for related screenshot collage.
The serial number has been intentionally rendered unreadable for obvious reasons, but it's sufficient to show that there's only one serial number associated with my products. I need serial numbers for the 32-bit CS4 components and for Acrobat X Pro. How do I get them? I tried chatting with an Adobe support agent a couple weeks ago, and he told me he couldn't help me. He said I needed to get the serial numbers from the company that provided me with the CS5.5 serial number (Identit-E, who evidently gets involved with providing serial numbers for validated student license purchases). They said they couldn't help me, and that I had to get with Adobe! So I'm being run around in circles with nobody taking responsibility! And when I tried to follow instructions and a link that I thought MIGHT give me some answers (on this page: http://kb2.adobe.com/cps/517/cpsid_51791.html)...
"In North America: If you're a student or educator, look in the Adobe Student Licensing website"
...I got a warning from my browser that it's an untrusted site:
I'm not into taking that kind of risk.
So I've done about all I can think to do, including contacting the actual reseller who sold me the software (no word from them yet). Nobody's claiming responsibility, and they're pointing at each other. That leaves me in the middle with no answers and only partially working, very expensive software!
If there are any ideas from folks on this forum, I'm all ears!
Thanks!
Scott

ScottSutherland can you please private message me with your contact information. So we can work on resolving your difficulties.

Retrieve Multiple Serial Numbers for given Delivery Document and Item

Hello Experts,
                      I am currently working on a 2Lis datasource to extract Delivery information.Now it is required to append the
datasource with field (say ZZSERNO) which should extract ALL Serial Numbers from OBJK table for a given Delivery Item.
I know that there is a link between table SER01 and OBJK to retrieve the same.However, my concern is- C_T_Data table is
already providing the Delivery Information and along with that I want to display ALL Serial numbers for a given Delivery Item.
A delivery Item can have more that one serial number linked to it as what I see in VL03N for a Delivery document.
So currently in RSA3, I retrieve say 1 record for a given Delivery Document and Item .Now an Item has say 10 Serial Numbers
associated with it, so i should see 10 Records for that Delivery Document and Item, after executing RSA3.
Please provide me with the CMOD logic to do so.

Hi,
You can Link LIPS and OBJK tables with Delivery and Del Item.........refer below for the code.
1) Declare an Internal table of type OBJK with fields DEL DOC, DEL ITEM and ZZSERNO .
2) Declare another Internal Table ITAB_LIPS of type LIPS with required fields say in your case *DEL DOC, DEL ITEM and ZZSERNO....etc.
3) Use below select statement to extract records from LIPS into ITAB_LIPS that you have declared for to fetch LIPS data.
Select DEL DOC, DEL ITEM ( here i have included only few fields but as per requirement please add fields here)   from
LIPS into corresponding fields of Table ITAB_LIPS.
4) write one more select statement to fetch Serial number data.
Select DEL DOC, DEL ITEM ZZSERNO from OBJK into corresponding fields of TABLE ITAB_OBJK for all entries in ITAB_LIPS
where DEL DOC = ITAB_LIPS-DEL DOC and
            DEL ITEM = ITAB_LIPS-DEL ITEM.
Loop at ITAB_OBJK.
Read table ITAB_OBJK into ITAB_LIPS with keys DEL DOC    DEL ITEM.
ITAB_LIPS-DEL DOC = ITAB_LIPS-DEL DOC
ITAB_LIPS-DEL ITEM = ITAB_OBJK-DEL ITEM.
IF SY-SUBRC = 0.
ITAB_LIPS-ZZSERNO = ITAB_OBJK-ZZSERNO.
ENDIF
ENDLOOP.
Hope the above code helps
Sujan

Can we capture two types of Serial Numbers for a material?

Hi,
I have scenario where i need to capture two different types of serial numbers for a material. This scenario is very similar to the below one -
Say if a CAR is a serialized material, then i want to capture engine no. and chasis no. for each car.
I know in standard serial number management, we can capture one kind of serial no. for an item, but can we capture two types of serial number for an item? If yes, how we can do that?
Please help.
Thanks,
Parimal.

Hi,
No it is not possible to have two serial numbers for a material.
The main attribute of a serial number is that it is UNIQUE.
You can better have the vehicle number as the required serial number and the other numbers under the Manufacturer data of the General data tab of the IQ01 transaction. ( Equipment master creation ).
You can better change the name of the manufacturer data such as Model number to Engine numeber and Manu serial no to Chasis no etc.., using CMOD transactions.
Regards

Want to install Indesign on my new computer but am having trouble. First bought CS2 in 2009 and upgraded to 7.5 in 2011. I have the serial numbers for both and was able to use it on my last computer. Where do I start?

want to install Indesign on my new computer but am having trouble. First bought CS2 in 2009 and upgraded to 7.5 in 2011. I have the serial numbers for both and was able to use it on my last computer. I don't use Indesign that often but there are some projects that it's good for. Where do I start?

Lchrichton123 what version of InDesign specifically are you wishing to install? You can find links to the installation files for the majority of Adobe Creative software titles at Other downloads

Researching Serial Numbers for MTO Production

Hello,
I work for a make-to-order manufacturing company. We currently use Project Systems and PP for production. We use the Project Definition + WBS Element as the serial number of our finished, sellable product (FERT).
I am trying to investigate using SAP serial number feature instead, but everything I am reading (SAP Help Files) seems more geared toward mass-production. Can anyone direct me to some information on a MTO scenario for serial numbering?
Thanks very much!
Timothy

Hi Timothy,
Serial number functionality is more applicable to MTO. In typical Mass production (Make to stock ) PP implementation , Batch management will be sufficient to identify if there is any quality issue for finished goods. But most MTO PP implementation would require Serial number functionality as you will need to track it for warranty( What has been revsion level for FG) .
You are using Project+WBS number as serial number which measn you have to use external serial numbers. There are user exist available to configure Serial number suffix. Projects have Project ID which can be Serial number suffix.
There is possibility of doing Delivery from Project( Not very commonly used) , but if you need to generate serial numbers for each project delivered, you need to create DO from project & assign serial number (First time in system). This is because Projects are compleleted without any FG number assigned anywhere in header & Project package is delivered & it don't have stock functionality.
Hope it helps,
Jatin

Need help in query to display lot and serial numbers for a Wip Job Component

Hi ALL,
I have a requirement as below.
I need to display lot and serial numbers for a Wip Job Component, i have a xml report in that for each wip job component i need to check whether it is a lot control item or serial control item based on that i need to display some data. so can you please help me to get the query to indentify the lot and serial number for a wip job component.
Thanks

Thank you for replying Gordon. I did not remember I had asked this before. I no longer have access to the other account.
What I need on the query is that I want a list of items with the on order quantity and when we are expecting this order to be received. The receiving date is based on the PO delivery date. The trick here is that I need to Master sku to show the delivery date of the component sku. In my scenario all components have the same delivery date for the Master sku. If there are mulitple delivery dates because each warehouse is getting them on a different date then I want to get the delivery date for that warehouse.
Let me know if this is possible and if yes please guide towards a query for it.
Thank you.

Unable to allocate the Serial Numbers for PO receipts?

Hi,
I want to allocate the serial numbers for the PO receipts for this i have done the following steps. (we are using the 11.5.10.2 version)
Serial Control at Organization Parameter Level is
Uniqueness With in Inventory items
Generation At Item level
Case 1: Items > Inventory Tab
Serial
Generation at Receipt
Prefix xxx
Serial 001
Now, i have created the PO While performing the receipts the Lot/Serial tab is not enabled
Note: I have generated the serial numbers from the On-Hand quantity > Generate Serial Numbers. then raised the PO and then performed the PO receipt.
Important: Under Items >Inventory Tab here the Material status for Serials is disabled and Material Status is not found under Setup > Transactions, is this feature is new in R12, please clarify this dount also.
Pleae advice.
Regards,
Kevin.

Hi Kevin,
I'm not sure whether you already got the answer for your issue.
If you are still looking for answer then, can you check the following:
- The INV org in which you have entered the serial number generation details (Prefix, starting serial no etc) for the item is same as the receiving org for PO receipt
- While doing PO receipt the "Destination Type" is Inventory
Material status control functionality for Lot and Serial is not new in R12. It is also available in 11.5.10. However your issue is not linked to Material Status for Serial.
The default Serial status is 'Active' To define additional material statuses to be used in INV you need to use WMS responsibility even if you are not using WMS.
Thanks
-Supro

Tiger/Leopard serial numbers for install?

hey all...had a curious question...so there are no serial numbers for Leopard, and I am assuming there were none for Tiger as well. My g/f and I bought a 5-pack family license tonight because we thought it would come with 5 serials for out MB,MBPro and iMac...we would just have the 2 extras for whatever...my question is,IS there some key embedded in the install disc that phones home during/after install to verify that the disc is a legitimate copy? I am getting ready to sell my pbook G4, and thought it might be a good selling point to put Leopard on it before i sold it, and kept the original Leopard disc...would this have any repercussions on the buyer after it leaves my hands, aside from if they ever re-format/re-install, they dont have a Leopard disc? How does apple know whether I have a 1-license disc or a 5-license(family pack) disc?

Apple mainly relies on your honesty with the installations. No serial numbers and no Genuine Advantage checks.
But there may be issues when you onsell your PowerBook with Leopard and the ser wants to re-install. They may be stuck with the 10.2 or 10.3 (whatever one) that came with your PowerBook.

I have serial numbers for previous versions so why dont qualify for members price when I try to buy creative cloud?

I have serial numbers for previous versions so why dont qualify for members price when I try to buy creative cloud?

We can't know. You have not told us anything about your existing products nor under which specific licensing/ pricing they were purchased. Not every product is eligible for discounts and that is just that.
Mylenium

Serial numbers for materials

hello,
I have done a setup for serial numbers and when I do the GR I get a blank serial number list.
I earlier used transaction IQ04 and maintained for one article the various serial numbers.
When I do the GR I must be able to autmaticlaly see all the serial numbers related to the article. The system shows blank serial numbers although I have maintained them.
Can you help to identify what I have missed that the serial number based on aarticle doesnt get coped over to the GR document?
Another point is when I do the GI I also dont see the serial numbers for which I have done the GR for the article. What am I missing here?
Thanks

hi
how the serial no profile has been configured ,ie if the exist required is marked in the serial no profile then while making the GR you have to select the serial no alredy created,but if you doesn't select the same you have to mark the serial no automatically while making the goods receipt
kindly check
regards
thyagarajan

If someone stole your ipod and deleted your apple id from icloud and u don't know the serial number. What can u do?

if someone stole your ipod and deleted your apple id from icloud and u don't know the serial number. What can u do?

To delete your iCloud account from Settings>iCloud they have to enter your ID password.
The can place the iPod in Recovery mode and they restore the iPod but they will have to enter your iCloud ID and PW to activate the iPod.
lost/stolen
No app on the iPod is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or continue to show off-line.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
iCloud: Erase your device
iCloud: Use Lost Mode
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

Serial Numbers for Production Orders

Hi All
Can anyone tell me the table in which the serial numbers are stored for the production orders? I have created a production order and have assigned serial numbvers to it. Now I want to extract these serial numbers from the table.
Thanks in advance.
Tom

Hello Jack,
In table SER05, the list of serial number details can be obtained.key the order noin ser05 table, get field OBJKNR, then pass this OBJKNR in table OBJK .
Some useful table for serial numbers
SER00 Generic table for serial numbers
SER01 Serial numbers assigned to a delivery
SER02 Serial numbers assigned to a guarentee
SER03 Serial numbers assigned to a material document
SER04 Serial numbers assigned to an inspection lot
SER05 Serial numbers for a production order
SER06 Serial numbers for Handling Units
SER07 Serial numbers for Stocktaking
SER08 serial numbers for Orders (SD)
The assignment of serial numbers to a production order can be done either via transaction CO02 or at the latest when the GR from Production is made.
I hope that this information clarifies the issue.
Regards,
R.Brahmankar

Serial numbers for packaging in Delivery

Dear Mr Meitalmo,
I have investigated about the Crystal Report and as it stands the Crystal report only pulls information that is already in the application, so it will not create the serial number.
I am trying to understand what you normally do to find an alternative for you.
So far I have come up with some ideas:
- if you need the serial number on the packaging only (and the items are not either batches or serial numbers) then you can change the items to batch and when you create the package be careful to take the items from the same batch.
- if you need serial numbers for the items, plus an extra one for the packaging, then do the following:
Create the UDF field in the packaging window and every time you create a new package write manually the serial number. Then modify the printing of the packaging so that this value has been included.
Alternative, you can create a UD table to store this information.
Please, let me know if one of my suggestions help and let me know what the scenario is.
Regards,
Marcella Rivi
SAP Business One Forums Team

Dear Meitalmo,
Now you should change the template of the packaging.
To do this please go to Business One and open the Delivery and then the packaging window.
Then go to the Print Layout Designer (PLD - you can click the pen on the toolbar) and choose the template.
The template must be modified in order to add the information you need.
Regards,
Marcella Rivi
SAP Business One Forums Team

I don't know my serial numbers for QT Pro.

Similar Messages

Maybe you are looking for