I don't know the restricted code of my phone 6300
i can't open my phone because of it!!
what will i do pls help me
Are you trying to use another sim card with your phone?
Similar Messages
-
Can I reset an iPad 1 without a computer and I don't know my restriction code?
Can I reset my iPad 1 without using a computer and I don't know the restriction code?
Try removing what is called the iPod Photo Cache on your computer.
http://support.apple.com/kb/ts1314 -
Help, somebody has turned the restrictions on on my daughters iPad mini and we don't know the pass code to turn it off. She can't use iTunes because of them being turned on. I have tried backing it up to a laptop and then restoring it to factory settings but you need the pass code to do this....any ideas how I can turn it off or reset it, anything that might help its driving me potty...
Many thanks
JoRecovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost. -
Hi. Bought recently iphone5 from singapore. but the one who sold us the phone has set restriction. now i cannot download any apps from my itunes. I dont know the restriction code so i think i need to reset my phone. does resetting remove the unlock?
You need to restore it with iTunes or wipe it from the phone itself... Settings > General > Reset > Erase All Content and Settings. Either of these will create a factory fresh phone, thus removing the restrictions. Note that ALL user data will be wiped.
-
Hi how do i restore my iphone 4s back to factory settings if i dont know the restriction code as the code to unlock my phone isn't accepted?? Please help I have upgraded and want to erase all my things off this phone to sell it
Forgotten Passcode or device disabled after entering wrong passcode
-
I don't know the unlock code...
Ok recently when i was in the car i had set my ipod down. Then when i picked it back up i found on the screen that it said enter code and had this little lock on it. Well i was happy to find that i could make the screen go away and still listen to my ipod, but later i found out that i couldnt turn the volume up all the way. I went to settings and clicked on volume limit to see if that was why the volume had changed, and when i clicked on it that enter code page popped up again. so obviously a lock had been put on it but i don't know the code. Is there any way to get it off?
ok nevermind about that I finally figured out the code. all i did was go through all the possible combinations and thankfully it was one of the first few i tried.
-
I need to master reset my phone, but I don't know my restriction code
I need to master reset my phone, but I don't know my restriction code
What restriction code do you need? If you mean your Apple ID and password, you can get help for that from http://iforgot.apple.com
-
I have a iPhone 3and i have to accounts with iTunes attached to it and I forgot the pass word on the phone so i opened another one and now i want that one on my phone but don't know how to do it. Pease help
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost. -
how do i reset my son's password on his ipod touch? we tried going thru itunes but it is asking for his pass code?
You will have to restore using the recovery mode as described in the article you reference, http://support.apple.com/kb/HT1212
-
How do you reset your iPod Touch 5th Gen if you do not know the restrictions password?
I have an iPod Touch 5th Generation and i need to reset it because i am having issues with it not loading basically anything since i did the update. I don't know the restrictions passcode so i was wondering if there was any way to reset it without the password.
Forgotten RESTRICTIONS Passcode
- Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored. Place the iOS device in Recovery Mode if necessary to allow the restore.
- Restore to factory settings/new iPod. . Place the iOS device in Recovery Mode if necessary to allow the restore.
- If you are up to file manipulation see the following but it may not work for iOS 6.1.3 or iOS 7
How to reset forgotten Restrictions...: Apple Support Communities
- How to Recover Restrictions Forgotten iPhone Restrictions Passcode | The iPhone and iPad Blog -
The restriction code is set on my iPhone and I didn't set it up. Could I have done something when tethering the iPhone to my MacBook Pro through settings in the MacBook? I'm a new iPhone user. thanks
answered
-
My ipod will add apps happily but it won't delete any so they've built up so now I can't add anymore. . I can't take it back to the factory settings because I don't know the 4 digit code. Please can someone help?! xxx
Sorry. You can't get help here. Ask whoever wrote the jailbreak.
You can try putting it in DFU mode (google is your friend), but that's all we can suggest.
Jailbreaking voids your warranty and AppleCare agreement and forfeits all rights to support. -
hi need your help.
updted my iphone 4 today on ios 7.0.4 and now with new start code required, what i never had before and i don't know the code.
how can i get this problem solved?
thx
peterHere's how you put it into recovery mode
1: Turn off your iPHone by holding the sleep/wake button till it says "Slide to power off."
2: Hold down the home button (Button on the bottom of the display with a square in the middle) and connect it to the computer while still holding it down till you see a music note with an arrow pointing towards it appear on the screen of your iPhone
3: iTunes will give you a message, "iTunes has detected a device in recovery mode; you must restore this device to factory settings to use this device."
4: Click on "Restore iPHone."
http://support.apple.com/kb/HT1808 if you want apple article steps -
my child went on my phone and activates RESTRICTIONS and now i can't disable it because i don't know the password.
Hi
Check this:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212 -
A passcode was put on an itouch and we don't know the code to get onto the itouch....What do we do?
If you can't remember the Passcode, you need to restore the device from the computer it was last synced with.
Instructions for putting the device in recovery mode > iOS: Unable to update or restore
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present
Maybe you are looking for
-
How do I get apps from my MacBook pro to my ipad
How do I get apps from my MacBook pro to my ipad
-
Best way to import data only from sql server 2k to ora9.2
I have a situation where I don't care about indexes, procedures. The DDLs from sql server 2k and ora9.2 are (mostly) teh same, I need to port the data from sqlserver to my ora database. what is the best way to do it? thanks.
-
Hello GRC Exports, We are planning to migrate GRC AC5.3 from Windows to Linux using the following procedure. Source system: Dual Stack GRC AC 5.3 on Windowsn 1. Export/Import the dual stack to target server. 2. Post-Processing steps as per the attach
-
Download error - ovi store- N8
I was perfectly happy with my ovi store, until a week ago where I had to update my ovi store on my N8. I'm not sure if the problem is from the update or not, all I know is that every time I try to download something (anything for that matter), I get
-
I have two questions: 1) When playing music, sound often drops out, especially when I move around the city. Is it because of the bluetooth interference? If so, is there any way to bring these dropouts to some minimum? 2) Sometimes, when I push play a