I don't know what is the problem..

I have a CISCO6506-E, with Sup II with PFC and an 8-Port GBIC connected to a 4506 on GBIC.
I have tagged the vlan, configure the trunk but I cannot ping the 4506 from the 6506. The 6506-E is just a forwarding switch (L2). What coud be the problem. I have check the status, no vlan mismatch, trunk is good, CDP is good.

Hi H,
I do not think there is an command like "set trunk negotiate disable" I think you might have given command "set trunk nonegotiate" and it should not create any problem as it just bring the trunk up without sending any DTP packet.
You cannot put negotiate on both sides and that is the probable reason trunk is going down. Negotiate keyword is just to let the switch know what is the encapsulation cofnigured on other side i.e isl or dot1q and it will work accordingly.
Can you please explain what have you configured as trunk mode on other side? I think we are lacking in some config if you just post the related config it will be of help.
Regards,
Ankur

Similar Messages

HT1476 I have a big problem in my phone charger . I have Iphone 5s . I don't know what is the problem but the bettery is not working true . A decrease in the battery very quickly and then turns off the machine . Please, I want to address this problem quic

I have a big problem in my phone charger . I have Iphone 5s . I don't know what is the problem but the bettery is not working true . A decrease in the battery very quickly and then turns off the machine . Please, I want to address this problem quickly .

http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/

HT201401 After changing the sincard I cannot dile any number and I get a message " call failed " I don't know what is the problem

The simcard have been changed twice by the carrier VODAFONE but still the problem exist

hello flabs, this is likely caused by an outdated extension. in case you have the social fixer addon installed, please update it to the latest version that is available at http://socialfixer.com/blog/category/releasenotes/.

I've just upgrade my ios 5.1 to ios 6 but my ipod is now hanging up and i cannot turn it off even i follow the troubleshooting procedures. What should I do? I don't know what is the problem.

I have problem with my Ipod touch when I upgrade it with ios 6. I cannot turn it off. I have alrealy followed the troubleshooting instructions to press both the off/sleep button and the home button but still it will not turn off. I cannot use my ipod anymore for it is just hanging up.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Interesting problem, don't know what's the hot spot

hello, im using a SB Li've! 24 bit sound card (not external). i formatted my harddri've few days ago, after that i installed
?realtek AC97 codec driver from my gigabyte mainboard utility cd
? sb li've! driver that comes with the product
? k-lite codec pack?v3.25 (and im using media player classic that comes with this codec pack to watch videos, even mov.s, flv.s and dvds)
before?the?format,?i?had?been using?these?softwares?too (no more upper versions) and didnt have any problem. but after the format, when i try to watch my iron maiden dvd with media player classic: the video is normal but the sound screws up when i set EAX to something except of "No Effect"... (from Creative Surround Mixer program, that blue one)
my?english?is?not?perfect,?so?if?u?didnt?understan d?something?or?want?more?information?please tell me, i really need help... thanks!!!
Message Edited by redbullah on 03-8-2008 0:35 AM

i don't know what's the difference between "+=" and" =+",such
as "x=+y" and "x+=y",who can tell me the difference about "+=" and "=+"?'+=' is one token and it represents the 'add assignment' operator as in:int i= 40;
int j= 2;
i+=j; // i == 42 after the add assignement'=+' are two separate tokens: the assignment operator '=' and the unary
plus operator. The last operator doesn't do much except for the fact that
it promotes its operand if needed and turns an lvalue into an rvalue.
An lvalue is an expression that can be assigned to (if not final) while
an rvalue cannot be assigned to. An example of the '=+' token pair is:int i= 40;
int j= 2;
i=+j; // i == 2 after the assignment Note that in the early days of C the '+=' operator was written as '=+' but
Brian and Dennis soon realized their mistake and changed it to '+=' ;-)
kind regards,
Jos

HT201303 I dont know what is the problem to bye some thing frome some games

I dont know what is the problem to bye some thing frome some games

I don't know either, more information would be helpful.

Please i did pay to renew my ios developer account and you sent me an email to reply within 2 business days, but nothing happend yet. may i know what is the problem?

please i did pay to renew my ios developer account and you sent me an email to reply within 2 business days, but nothing happend yet. may i know what is the problem?

This is primarily a user-to-user support forum and not related to developers. The following link has information about checking your program enrollment: https://developer.apple.com/support/ios/enrollment.html#howcanicheckstatus
If that doesn't help, there is a "Contact Us" button at the bottom of the page in the above link.

I just want to know that if I buy an iphone 4S here in melbourne can i use it in china? i don`t know whether it`s locked or not and i don`t know what`s the network in china as well. Can somebody please help?I am really in a hurry to know it. Thanks a lot.

I just want to know that if I buy an iphone 4S here in melbourne can i use it in china?
i don`t know whether it`s locked or not and i don`t know what`s the network in china as well.
Can somebody please help？
I am really in a hurry to know it.
Thanks a lot.
P.S: For the iphone 4S. is there any difference for the one from online shop or the actual store?

iPhones purchased from the online Apple Store in Australia will be unlocked. To the best of my knowledge, unlocked iPhone are not available from the physical Apple Stores at this time, though you can call the Apple Store in Melbourne and inquire.
Note that the warranty on iPhones is not international, so if you purchase an iPhone in Australia and it needs service, you would have to ship the iPhone to someone in Australia to take or send to Apple for service and then ship it back to you.
Regards.
(Note for any readers: this is an old thread and I posted before noticing the date, but decided to leave my reply in case anyone else finds the thread and has the same question).

I have to transfer volume licensing CS6 design and web premium, but I don't know what is the right module. I've found many, all different...thanks

I have to transfer volume licensing CS6 design and web premium (between 2 End Users) but I don't know what is the right module. I found some, in Adobe's website, but all different...
One module for transferor
One module for recipient
One module for both parts
I filled the forms, I signed them , I called the assistance for case number and they've sent me another module:
one module for both of parts, without field for to insert serial number...
What have I do? Which module must I use? I'm becoming histeric!
Thanks to all for help
Letizia

Volume Licensing
http://helpx.adobe.com/x-productkb/policy-pricing/volume-licensing-site.html

Help : After upgrade to IOS5, I only can use my iphone 3gs in Spore instead of Msia. Any1 know what is the problem & how to solve it?!

I bought iphone 3gs in singapore last year,I had no problem to use it in Singapore & Malaysia but after i upgrade to ios5,i can't use it in malaysia.It will automatic restart my phone itself. Is it because of IOS5 problem?!Because when I register my itune a/c, I selected the country is Singapore. Anyone know what is the problem & how can I solve it?!

If it automatically restarts the phone firmware is corrupt. Restore the phone with iTunes and set up as a new phone, do not restore your backup, which is likely where the corruption is. If it then works you can try restoring just the backup. If that breaks it again you know where the problem is; you will have to start over and manually reinstall your content.
To restore just the backup, right click on the phone's name in iTunes and select "restore from backup"

Hello, i am using ipad mini now. When i first receivedHello, i am using ipad mini now. When i charge it till 90%, it will stop charging on its own. I need to reconnect in order to charge it till 100%. Anyone know what is the problem? Thanks.

Hello, i am using ipad mini now. When i charge it till 90%, it will stop charging on its own. I need to reconnect in order to charge it till 100%. Another problem is when i am using an apps, for example looking through the photo, suddenly the screen will back to Home. Anyone know what is the problem? Thanks.

This is a user-supported board. You are not addressing Apple here. Nor is it a good idea to post your private information to a public forum. You should edit your post immediately.
Unfortunately no one here can access your support history. You must respond to the emails directly.

New pictures on iphone4s don't stream. what is the problem?

new pictures on iphone4s don't stream. what is the problem?

- How to Recover Restrictions Forgotten iPhone Restrictions Passcode | The iPhone and iPad Blog
Apps crashing
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

HT4623 my iphone 4 i already up date new software ios 7. but now i can not open my phone.. please let me know what is the problem ?

my iphone 4 i already up date new software ios 7. but now i can not open my phone.. please let me know what is the problem ?

sir, i dawonlodding the new software ios 7,that time my phone henged then now i can`t open it.pls let me know whats problem?

Hello guy, i have a problem when playing the FL commando which when i am playing the game , sudden the game is log out by itself. I would like to know what is the problem for my ipod 4g, just buy recently only and having ios 5.0.1

Hello guy, i have a problem when playing the FL commando which when i am playing the game , sudden the game is log out by itself. I would like to know what is the problem for my ipod 4g, just buy recently only and having ios 5.0.1

- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I was playing candy crush and I had too much problem with my bill your charge too much I want to know what is the problem with this game cost

HELLO
I was playing candy crush and I had too much problem with my bill your charge too much I want to know what is the problem with this game cost

Take it up with iTunes Support - we are not Apple here, we are just users like you:
http://www.apple.com/support/itunes/ww/
Cheers,
GB

I don't know what is the problem..

Similar Messages

Maybe you are looking for