I don't know what really the cause of my ipad. its just went off and I cannot user it now. someone knows what's them probl
What's the problem of my ipad?
Have you tried a reset to see if that will start the iPad?
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Similar Messages
-
after installing the latest IOS 5 on my iphone 4, my phone went off and all i can see now is an apple logo.i can´t even open it.. what to do now?please help.. thanks
thanks a lot.. its ok now..
-
My ipad 2 just went off. It was working perfectly while charging. I have pressed the power button for ten seconds and it's still not coming on. What do I do?
First, confirm that the iPad is charged and then try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again. -
My iPod froze fully charged on the lock screen for 5 minutes, then went off and will not switch back on?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I tried to upgrade the new version for i pad mini but when downloading it just went off and told me to connect it to i tunes, so i did and now it says i need to restore it. Does that mean I will lose everything in my i pad?
In other words, the upgrade process did not go altogether well and the device has lost all its contents. When you plug it in, they will be restored from the backup.
-
my iphone just shut off and I cannot restart it and when I plug into my computer dock it says it has detected an iphone in recovery mode? What do I do???
You'll have to restore it. See http://support.apple.com/kb/ht1808.
-
TS3694 What is the cause of "error 1015" when trying to restore and update an iPhone 3gs?
What is the cause of "error 1015" when you're trying to restore and update an iphone 3gs? My iphone is currently in recovery mode and can not get out of it. All the information about my iphone shown on itunes is only marked as- N/A. How can I get my iphone out of recovery mode and get it to recover and update?
Thank you,
MacQuestioner3http://support.apple.com/kb/TS3694#error1015, which says:
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
In other words, either your phone is jailbroken and you are sadly out of luck or you are trying to downgrade iOS. -
Last week, my gf was stolen and lost her iPad. I thought that everything was lost because "Find My Phone" didn't manage to track the iPad location so the police could do something.
Today, I ended up reading this article (http://9to5mac.com/2014/04/03/ios-7-bug-allows-anyone-to-disable-find-my-iphone- and-bypass-activation-lock-without-a-password/) which tells me that the iOS 7.1 presents a bug where someone can deactivate the "Find My Phone" function without the password.
What are the options here so I can rehave the stolen iPad, which Apple helped the burglar to keep it or even sell it?
Appreciate your cooperationApple didn't "help the burgler" do anything. Did she have a passcode on the device? If so, the thief would not have been able to access any of the functions needed to disable Find My Phone. Also, if the device doesn't show up in iCloud's Find My Phone, it may be that it is simply turned off, or not connected to a network.
-
So i was using the itunes already provided on my ipod and i was previewing a song and my ipod just shut off. Then, when i tried to turn it back on, the screen flashed quickly a light grey color and shut back off. Now it wont do anything and i cant make it come back on....what should i do?
Try here:
iPod touch: Hardware troubleshooting -
My phone was working fine, then just went completely blank, and now is totally unresponsive
Plug it in to mains power for at least 15 minutes. If it doesn't automatically come on, try a Reset... press the home and sleep/lock buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
-
I just updated the OS on my IPad. I turned it off and now have retured to it and it won't turn on. Anyone else having this problem?
Lc137-
Try resetting (rebooting) the iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. The iPad will restart after a couple of minutes. Resetting this way will not hurt anything, and sometimes solves mysterious problems.
If that does not help, see if this article does: <iOS: Unable to Update or Restore>.
Fred -
What do I do if my iPhone 3GS just went black and won't turn back on or anything?
it has the latest update and everything.
i was snapchatting my friends, hit the home button and the whole phone went black and won't turn back onReset, hold both home and power buttons until the iPhone begins to start, usually takes about 10 seconds. If still nothing, connect to Wall Charger and Reset, this can sometimes take about 20 seconds while on charger.
-
it just wont turn on after repair on the screen
If it never worked after the screen replacement then it would appear that you have a hardware problem either caused by the repair or the problem that lead to the screen replacement.
-
What is the difference between Apple Ipad Air Model
What is the difference between Apple Ipad Air Model # MD788LL/A and Model # MD788LL/B
These models both use the same i7-3820QM processor, so difference(if any) is probably not in CPU(only stepping can be different, but intel site shows only E1). GPU is also the same(again, 'revision' or something may be different). doesn't seem that RAM is different either, it's 1600 DDR3L(only timings and power consumption can differ, but it's unlikely). SSD - cannot say anything from specs. Screen[manufacturer]? Googling shows nothing for me. And only visible difference(apart from model number) for me is price. As I'm considering purchase, I don't want to spend more money to get different number.
-
What is the easiest way to freeze-frame a movie file and run it as a still?
I have a 'chase' sequence of images of elements in the Periodic Table and it slows down and stops on an element. This is in a movie file. After it has stopped I want to hold that single frame for another 10 seconds or s. Rather than make a still is there an expression or shortcut to doing this inside AE? preper to do on the same layer as I have about thirty of these movie layers so don't want to dupliacte if there is a trick to it. But if I have to duplicate how do I assign a locked timecode to replace the running timecode for the layer? I bet its just putting a literal into some propoerty but i dont know which property.
For freezing a frame for the entire duration, there's Layer > Time > Freeze Frame
Details are in this section of After Effects Help.
Maybe you are looking for
-
Close Open Amount on A/P Down Payment Invoice
Hi, I have the following scenario: I have created an A/P down payment invoice for 1000$ Create an Outgoing Payment for this A/P Down Payment Invoice for 1000$ This payment is closing the A/P Down Payment invoice Create an A/P Invoice for 800$ - apply
-
Is order in which the conditions given in the 'WHERE' clause are imortant
Hi All, Is the order in which the conditions are given in the 'WHERE' clause are important for performance with regard to oracle query plan. Regards
-
CTI OS desktop agent cannot answer call
Hello All, I am seeking a suggession on a issue which seems to be lying with network. Agents are located in different location and all remaining Cisco components like ICM, CVP and CCM are in data center. Agent succesfully logs in via CTI os Dsktop ag
-
Trash in BSP-Pages for ABAP-reports
Hi, it´s strange that I´m getting trash in the BSP-Pages that represent an ABAP report. I just can´t identify how it is produced and shows up between Titel and real list. I use SUBMIT (progr_name) WITH SELECTION-TABLE sel_table
-
Hi, We needed to increase the length of the domain KPEIN from 5 to 8. We took the access key and made the changes. But while activating the domain ,we got activation errors and domain was partially active. Now, we realized that we should have created