I don't know where my photoshop has gone

I downloaded the Adobe CC and then the Photoshop CC App... it says it is downloaded but I can't find it and cannot open it to try it out.
I wanted to try it out today so that I could purchase the monthly $9.99 per month....

That sounds like XP. XP does not meet all CC requirements After CS5 Adobe stopped supporting GPU on XP. CC uses GPU for features like 3D.
Is Server 2008 or 2012 XP or Win 7 bassed?
The normal process to install Photoshop CC is:
Download and Install  Adobe Cloud Desktop Application.
Open the Cloud desktop log in with your Adobe User ID and password that has the subscription.  Use the APP tab and install Photoshop CC.  The cloud installer should download Photoshop CC install it and add a Photoshop CC launching icon to you system on the desktop and in the start button
System requirements
Windows
Intel® Pentium® 4 or AMD Athlon® 64 processor (2GHz or faster)
Windows 7 with Service Pack 1, Windows 8, or Windows 8.1*
1GB of RAM
2.5GB of available hard-disk space for installation; additional free space required during installation (cannot install on removable flash storage devices)
1024x768 display (1280x800 recommended) with OpenGL® 2.0, 16-bit color, and 512MB of VRAM (1GB recommended)†
Internet connection and registration are necessary for required software activation, membership validation, and access to online services.‡
* Video features are not supported on 32-bit Windows systems.
† 3D features are disabled with less than 512MB of VRAM. Read the Help article.
‡ This product may integrate with or allow access to certain Adobe or third-party hosted online services. Adobe online services, including the Adobe® Creative Cloud™ service, are available only to users 13 and older and require agreement to additional terms and Adobe's online privacy policy. The applications and online services are not available in all countries or languages, may require user registration, and may be subject to change or discontinuation without notice. Additional fees or membership charges may apply.
Message was edited by: JJMack

Similar Messages

  • IWeb & Blog.app - Does anyone know where "Blog.app" has gone?

    I’m using iWeb, fine. But earlier this year I purchased and used something called “Blog.app”. My Mac’s CPU needed replacing and I hadn’t backed up all my software. I can no longer trace this and so can’t download a replacement.
    Does anyone know where “Blog.app” has gone?

    I don’t think so. Blog.app was Apple software. I
    bought it from them. I suppose I could phone
    them...
    Do that. You're mistaken. No such thing.
    Maybe you are thinking of iBlog.
    http://www.lifli.com/Products/iBlog/main.htm
    Thanks for this. That’s the answer - I’d forgotten the name of the software. Cheers

  • I received a message on my iPhone 4 that has a video attached to it. I "saved video" but don't know where. How do I find it and send it to mi MacBook Air?

    I received a message on my iPhone 4 that has a video attached to it. I "saved video" but don't know where. How do I find it and send it to mi MacBook Air?

    It would have saved to your camera roll.  Connect the phone to your Air via a USB cable and then run Image Capture which is located either in your Utilities folder or Other folder, depending on what version of Mac OS X your are running.  You will then see all the photos and videos stored on your iPhone and can then download them.

  • My iphone has been water damaged and in the mean time ive gone back to using my old phone. But i need to get all the contacts from my iphone i had synced to my laptop, but i don't know where to find them and im not sure if ive backed them up to anything!

    my iphone has been water damaged and in the mean time ive gone back to using my old phone. But i need to get all the contacts from my iphone i had synced to my laptop, but i don't know where to find them and im not sure if ive backed them up to anything!

    If your contacts are synced to your computer then they are in the supported app you are syncing with.
    When you set up syncing of contacts on your device, which application did you select? 

  • My iPhone 3g has 2 white horizontal lines i don't know where did it came from. I turn it off then on but its still there. the lines spreads everyday. I dont know how to fix it. need some help guys.

    my iPhone 3g has 2 white horizontal lines i don't know where did it came from. I turn it off then on but its still there. the lines spreads everyday. I dont know how to fix it. need some help guys.

    If you take a screenshot (Press the home button and Lock button at the same time), does it appear on the screenshot? Zoom in on the screenshot and see if it's still there.
    If not, then your display is failing. I would recommend taking it to an Apple Store if you can, if you can't then to an authorised Apple reseller.
    If it does appear on the screenshot when you zoom into the spot, then it's a really weird software issue! You might have to backup and restore the device.
    Let me know!
    xeni

  • I have very thin, colored lines running vertical on my desktop monitor screen.  I don't know where they come from or how to get rid of them.  I started with one and now have three.  Can anyone give me some insight about what to do in getting rid of them?

    I have very thin, colored lines that have shown up on my IMac monitor screen.  I don't know where they came from or how to get rid of them.  I'm concerned now because I started with one and now have three.  Does any know why this occurs or how to get rid of them?

    I got an address from Applecare, although I can't place my hand on it right now. I didn't bother persuing the letter route myself as I didn't expect much. I know that the location was Cork, Ireland though as that where the UK Applecare is based as far as I'm aware. The best thing to do is to call Applecare (if it's free) and discuss the issue. State that you are not happy wit the fact that you will have to pay to have the problem resolved especiiay if it is an ongoing problem that has not been resolved. I ended up speaking to a senior manager of the Applecare team who then proceeded to tell me about mailing in my grievence to customer services division or something like that.
    If I can find the address I may post it if I'm allowed.
    In the case of age, Schools usually have a 5-year life-cycle as they tend to be used differently than consumer machines, i.e. being used constantly on a daily basis for at least 12 hours with no break. you would expect issues to appear after a few years, but I expect problems that arise through defects to be resolved and stay resolved. As I mentioned we had machines for around 2 years before the lines appeared and sent them to be repaired. I'm happy with that. What I am unhappy about is the fact that the problem has reappeared exactly in the same way and now I'm left with around 7 machines that I either pay loads to repair or, the more likely replace the machines with newer ones since the age is now big enough to warrant the replacement.
    Sorry for the lengthy moan, but these are the reasons I purchased Apple ahrdware in the first place to avoid the "not our problem" stance some PC vendors  usually take, similar to the Dell monitors thread mentioned in here somewhere.

  • I have home videos from a Sony DCR-HC20 and am trying to get them onto my IMac in itunes or imovie and I have it plugged in with a USB and don't know where it is or what to do next.

    I have home videos from a Sony DCR-HC20 and am trying to get them onto my IMac in itunes or imovie and I have it plugged in with a USB and don't know where it is or what to do next.

    Hello, not certain, but turn the Camera onto Play if it has such a setting, does it show up in iMovie then?

  • I have a 2009 A6 with a 5th Gen. iPod. I mostly listen to audio bks, not a lot of music. Often, the MMI starts on the first song on my iPod, therefore I don't know where I stopped in my 4-6 hr book.  How can I get MMI to start where I left off?

    I have a 2009 A6 with a 5th Gen. iPod pluggedinto the MMI.  I mostly  listen to audio books, not a lot ofmusic.  The books are 4-6 hours long, vs 4-6minutes with a song.  Often, but not always, when I start my A6, the MMI starts on the first song on my iPod, thereforeI don't know where I stopped in my 4-6 hour book.  How can I get the interface to stay stopped where I left off?  I have gone into iTunes and placed my current book as the first "song" on my iPod for ease of finding it, but often the MMI starts it over at the beginning.  Thank you if anyone has any experience with this.  My dealer in San Rafael, CA says they've never heard of this issue. 

    I think my iPod, which is an iPod touch 3rd generation , which is a lot different from a nano, which really makes it almost impossible for me to help you, which is why I suggested that you post your question in the iPod nano community.  Your first post says that your product is an iPod nano. I think the people who answer those questions would be most likely to help you. If yours isn't a nano then you can pick the right community from here. This community is really to answer questions about this forum, or issues that don't fit anywhere else.
    laverne's mom
    Message was edited by: laverne's mom

  • Don't know where to key in...

    Hi,
    I'm back with another problem...
    I have a Server running Suse 7.3 with HIGHPOINT RAID ATA133 HPT374 PCI card.
    I upgraded to ArchLinux 0.7b2.
    The problem is that I don't know how to load the driver on startup.
    In Suse, I had the following 2 lines in the /etc/modules.conf working:
    'probeall block-major-8 scsi_mod sd_mod hpt374'
    'options -k hpt374'
    Of couse no info/man for general installation from the mfg website (only for Suse/RedHat).
    Driver has been compiled for the kernel installed properly and with 'insmod /home/test/hpt374.ko' it's loaded and working (without modprobe scsi driver)
    Someone can help me ?
    I'm new about kernel 2.6.x and Archlinux!
    PS: HDPARM is useful for IDE-RAID configuration ?
    Is there someone can suggest me the best options for ATA100/133 ?
    Thank you
    Leo

    Hi to all.
    first of all thanks for your time and patient.
    Now I'm more sure my english is very poor! :-))
    Okay my configuration :
    - HDD Eide master IDE (boot) 80Giga with Arch Linux
    - Controller RAID PCI (supported by Linux/Bsd) with 4 HDD in Raid 5.
    Archlinux boot smooth from disc0 (Primary Master IDE).
    On the RAID there is the shared (samba) directories for all the PC clients.
    The RAID need a driver to work (hpt374), so I believe first load the driver and then mount the RAID partition in, for example, /mnt.
    The driver is the HPT 374 that is different from the one in kernel 2.6.x (so I always have to disable from kernel, recompile a new kernel, and build the new driver from the source through a 'makefile' supplied from the manufacturer of the RAID card).
    Driver was loaded under Suse 7.3 (kernel 2.4.x) with 2 lines inside the file /etc/modules.conf, that are the two lines I mentioned on my first post.
    I tried to load the driver HPT374 as module inside /etc/rc.conf, but I need the option '-k' when the driver is loaded (manually : 'modprobe -k hpt374') so I don't know where to key in the option '-k' to load properly the driver.
    Funny thing is that Highpoint (manufacturer) nowhere explain the meaning of '-k' option, just force everybody to use it, telling twice to remember about it ("please remember that '-k' option must be included everytime you load the driver, otherwise it will not work properly"!!!)
    So, if I load the driver through /etc/rc.conf, I cannot include "-k" option.
    If I have to load manually/separately, I don't have idea where I can setup a script or include this command!
    You also mention about "build a kernel" with the driver in. It sound great!
    I'm newbie: can you redict me some HOWTO about compiling kernel with a driver in? I always just untar the new valilla kernel fvrom kernel.org, and proceed with taking aways all modules I do not need! So I don't know how to include external driver/module and patches.
    Thanks for your great patient!
    Thanks to Archlinux for a great distro!

  • Don't know where the error is!!!

    hi again
    i wrote the code for the add button ,, but when i enter the path of the .au(eg a:\piano.au) in the text field and click add it will be added to my database and the .au file will be saved as a long binary data in the db,, when i come to search for it in my application i get in the voice text field something like that 61003A005C007000690061006E006F002E0061007500 not(a:\piano.au), i don't get the path so when i come to play it it will not play i don't know where the problem is ..
    this is the code:
    if(e.getSource()==vadd)
    //User has not populated all the input fields.
    if(vname.getText().equals("")|| vaddress.getText().equals("")|| vphone.getText().equals("")|| vsex.getText().equals("")|| vdob.getText().equals("")|| vtemplate.getText().equals("")|| vvoice.getText().equals(""))
    JOptionPane.showMessageDialog(null, "Please fill in all the fields","Missing Fields",JOptionPane.INFORMATION_MESSAGE);
    }//if
    else
    // save the new customer:
    try
    //1. take the customer's data:
    int vuserId = Integer.parseInt(vid.getText());
    String vuserName = vname.getText();
    String vuserAddress = vaddress.getText();
    String vuserPhone = vphone.getText();
    String vuserSex = vsex.getText();
    String vuserDateBirth = vdob.getText();
    String vuserTemplate = vtemplate.getText();
    String vuserVoice=vvoice.getText();
    File file = new File(vuserVoice);
    int fileLength = (int)file.length();
    if(fileLength > 0)
    fis = new FileInputStream(file);
    String query = " INSERT INTO voice VALUES('"+vuserId+"', '"+vuserName+"', '"+vuserAddress+"', '"+vuserPhone+"', '"+vuserSex+"', '"+vuserDateBirth+"', '"+vuserTemplate+"', ? ) ";
    PreparedStatement pstmt = conn.prepareStatement(query);
    pstmt.setBinaryStream(1, fis, fileLength);
    pstmt.executeUpdate();
    else
    String query = " INSERT INTO voice VALUES('"+vuserId+"', '"+vuserName+"', '"+vuserAddress+"', '"+vuserPhone+"', '"+vuserSex+"', '"+vuserDateBirth+"', '"+vuserTemplate+"',?) ";
    stat.executeUpdate(query);
    /*String query = " INSERT INTO voice VALUES('"+vuserId+"', '"+vuserName+"', '"+vuserAddress+"', '"+vuserPhone+"', '"+vuserSex+"', '"+vuserDateBirth+"', '"+vuserTemplate+"', '"+vuserVoice+"') ";
    stat.executeUpdate(query);*/
    vupdateTable();
    } //try
    catch (Exception ev)
    System.out.println("Caught exception in add action: " + ev);
    } //catch
    }//else
    }//else if
    So plzz can some one help..

    The characters you get is just the (reversed) unicode representation of the string you want:
    class Printit{
    // this shows the two representations are equal:
    public static void main(String [] args){
         String tu = "" + '\u0061' + '\u003A' + '\\' /*'\u005C'*/
                           + '\u0070' + '\u0069'
                           + '\u0061' + '\u006E' + '\u006F'
                           + '\u002E'
                           + '\u0061' + '\u0075';
         System.out.println(tu);
    }shows this - well the '\' is only allowed escaped, so I may not use '\005C' directly.
    I suppose the field in DB has a wrong format or you do not read it the right way. The writing seems OK to me.

  • How to embed a swf in Catalyst. (don't know where to associated files etc.)

    I'm trying to embed a 'canned' swf package on one of my FC states. No problem dropping the swf on the
    page (I did find out AS2 doesnt work, but AS3 does )
    When I run the project I get a message saying it cant find an associated xml file.
    The package has the swf, an image folder, an index.html, a .js file and an xml file. I don't know where to put these to get it to work. Tried it locally and on my server. I'm running panini and burrito.
    Thanks,
    Andy

    You are going to need to recreate the directory structure  that 'canned' swf is looking for beneath the Flash Catalyst output. If I am not mistaken, the swf will be inside an assets directory. Try placing the xml file in there.
    Good luck.

  • Part fell off printer...don't know where it came from

    I have an Officeject 7500A Wide Format printer. All of a sudden there was a part laying on my desk and I don't know where it came from. It has this number on the back:
    >P0M<
    C10
    Any ideas where this piece belongs?

    Hi @pahenderson 
    Could you maybe take a photo of the part and post it here?
    Thanks
    Ciara
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • Don't know where to get started hacking a gtk-engine code?

    Hi,
    I've been messing around gtk themes for a week now and find the smooth-engine having the most potential for my use, but it has quite a lot of unnecessary options to my taste and then again it's lacking others which I'd like to have. I also found the code to be rather old, the latest bugfix is from 2004. Rather than using two or more engines for a perfect theme, I'd like to learn about the internals of an engine and.. well the firs thing would probably be cleaning all unnecessary stuff from the code before anything else.
    As the topic says, I don't know where to start and haven't found any easy to follow tutorials on the topic. So if you have a link or any other info you'd like to share, please do so.
    Thanks,
    Sakari

    Sorry, I misuderstood. I thought you had the code.
    See the instructions here: http://www.apple.com/macosx/uptodate/
    If that doesn't work, try the Support link on the App Store.

  • I have an iPhone 4. I've been archiving email I want to keep but I don't know where it's going. I don't see a folder called "Archive"

    I have an iPhone 4. I've been archiving email I want to keep but I don't know where it's going. I don't see a folder called "Archive"

    The procedure is Settings>Messages>Send & Receive at>You can be reached by iMessages at>Add another email address. The email address has to be a valid working email address, obviously. Apple should verify the email address and you have to go to the inbox of that email account, read the verification email from Apple and follow the inductions in the email in order to complete the verification. Then you go back to the settings, uncheck your email address and check the new email address to be used as the contact email address.

  • I changed my iPhone lately but i can't restore my last backup since it keeps saying "itunes could not restore backup because the password was incorrect" but I don't know where to put the password to make it happen... Any suggestions?

    Hey guys,
    I just bought a new iPhone but i can't restore my backup files beacuse it keeps saying "itunes could not restore backup because the password was incorrect" but I really don't know where to put the password to restore it. I really have some files that are meaningful for me so I really need help. Any suggestions anyone?

    Select your iDevice in the iTunes.
    Choose the Summary screen (tab) and scroll to the bottom of the screen.
    Then un-select Encrypt iPhone backup.
    iTunes will then prompt you to “Enter the password to unlock your iPhone backup”, enter the password you set originally.

Maybe you are looking for

  • Why can't I access the received variables??

    Hello, I created a new partner link which has an operation which transmits a complex variable type (3 strings, 2 ints). If I add a RECEIVE to my bpel process, I can create an input variable. The problem is, that I want to access the data (of the data

  • Making it easier to see what's on the screen

    Is there a universal way to increase, across the board, my MacBook Pro's "default" or "system" font? I'm talking about things I can't change via preference panels of individual apps, or by using the "Universal Access" Zoom feature (which doesn't work

  • Separate the html code and CSS code

    is there any setting where I can separate html Coden with CSS code?

  • Determining Where Hits Were Found (XML Section Groups)

    Hello all, Hoping for a bit of help. It's my first time posting here, but I've benefitted from reading a lot of your posts. I have created a single Oracle Text index for a resume database of sorts. It utilizes a user datastore. The procedure I use ga

  • Discovery Administration and Discovery Desktop Installation toghether

    I've already installed Discovery Administration and Oracle 9i Database. Now, how could I proceed to install Discovery Desktop without getting in trouble with Oracle Homes? Thanks for help...