I don't need ilife on my macbook air. Can I uninstall it?

Ok, I am new to the mac family. I recently bought the full line for my entire household. Macbook pro, iMac, Mac mini and Macbook air. Every one of these run the same but I am very particular with my macbook air, 64 gb. I just did an update to iphoto and it was almost 2 gbs! I do not need iife in my macbook air since I am using it only for my accounting business. Can I uninstall ilife from my macbook air since i have the sames programs already with my other macs?

Absolutely you can. Just drag the apps themselves to the trash.

Similar Messages

  • I dont have ilife on my macbook air, i tried installing it with the reinstall drive still its not happening what should i do?, i dont have ilife on my macbook air, i tried installing it with the reinstall drive still its not happening what should i do?

    i dont have ilife on my macbook air, i tried installing it with the reinstall drive still its not happening what should i do?, i dont have ilife on my macbook air, i tried installing it with the reinstall drive still its not happening what should i do?

    Hi,
    use Carbon Copy Cloner http://www.bombich.com/ to clone the OSX from your internal SSD to the external USB-connected one.
    Boot OSX from the external harddisk and install what programs/apps you want.
    No need to buy another OSX as Apple explicitly allows such usage.
    I don't have a MBA so I can't comment on the USB-hub.
    Regards
    Stefan

  • TS2446 my app store is not working, i tired signing in but showing me "An unknown error has occurred" my password is not wrong, please and someone help, because i need to update my macbook air. thank you

    my app store is not working, i tired signing in but showing me "An unknown error has occurred" my password is not wrong, please and someone help, because i need to update my macbook air. thank you... how can i make it work?

    I cannot sign out. When I go to the iTunes & App Stores in settings, The Apple ID field shows my id but it is faded and I cannot select the field.

  • Help...I need to uppdate my macbook air but i cant remember my security questions, wath should i do ?

    I need to uppdate my macbook air but i cant remember the answers security questions, wath should i do ?

    Start here:
    https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

  • HT5219 Which keys to I need to switch my macbook air display to an external thunderbolt display connected via mini port?

    Which keys to I need to switch my macbook air display to an external thunderbolt display connected via mini port?

    Which keys to I need to switch my macbook air display to an external thunderbolt display connected via mini port?
    If you just bought the external Thunderbolt Display, you may be able to return it for the LED Display.

  • Why don't my iPhone 6 and macBook Air calendars sync?

    Why don't my iPhone 6 and MacBook Air calendars sync via iCloud or when connected?

    Hi Hooperi,
    If you're experiencing issues with iCloud Calendar syncing between your Mac and iPhone, then follow the directions in the article below.
    iCloud: Troubleshooting iCloud Calendar - Apple Support
    Thanks for using the Apple Support Communities!
    Cheers,
    Alex H.

  • Hi, I don't have sound on my MacBook Air and the Mail program never respond, please help me out!

    Hi, I don't have sound on my MacBook Air and the Mail program never respond, please help me out!

    Hi Mr. Shahid,
    Thanks for visiting Apple Support Communities.
    Start with the troubleshooting tips in this article if you don't hear sound from your MacBook Air:
    OS X Mavericks: If you can’t hear sound from your speakers
    http://support.apple.com/kb/PH13841
    Best,
    Jeremy

  • HT4437 U-verse says I don't need APPLE TV to use Air Show.  Apple instructions say I do.  Which is right?

    U-verse says I don't need APPLE TV to use Air Show.  Apple instructions say I do.  Which is right?

    If you mean AirPlay, you can only wirelessly stream video (either the iPad's screen or an app with video out) via an Apple TV or a computer running software such as Reflector or AirServer (the computer would be connected to the TV). There are other devices, including Apple's Airport Express and a number of third-party audio receivers and speaker sets, that can stream audio only.
    Regards.

  • My MacBook Air can't get past the gray screen with the apple logo. What's the fix?

    My MacBook Air can't get past the gray screen with the Apple logo, so I can't login. Does anyone know the fix for this?

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
    a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
    How to back up and restore your files
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    How to use and troubleshoot FireWire target disk mode
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode.* The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
    If you can boot and log in now, reboot as usual (i.e., not in safe mode.) If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
    Step 6
    Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
    Step 7
    Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
    Step 8
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

  • I lost App store app on my macbook air.can i get it now?

    i lost App store app on my macbook air.can i get it now?

    Are you running with Snow Leopard 10.6.5 as your profile suggests.   If so you should not be able to get to the App Store.   So what do you have?
    You need Snow Leopard update 10.6.8.   Mac OS X 10.6.8 Update Combo v1.1
    Once you have that I don't see why not.   Check your purchase listing.   If it is there you can download again free.

  • Macbook air can't go to the internet when connected with hard disk

    Hi, so my macbook air can't go to the internet everytime when it is connected with my hard disk. The wifi icon on the top right corner says my macbook is connected to my wifi but my macbook just can't go to the internet. I unplugged my hard disk and I have no problem connecting to the internet right away? I would like to know if there is any solution for this problem.
    Thank you

    Try resetting your SMC.
    Resetting the SMC of an Intel-based portable Mac with a battery you should not remove on your own
    Note: This will not delete any data.
    The SMC is responsible for controlling various system functions. None of your data will be deleted by resetting the SMC.
    Shut down the computer by going to Apple () > Shut Down…
    Select Shut Down or allow the computer to shut down automatically.
    Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
    On the built-in keyboard, press the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
    Release the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
    I hope I helped.
    Austin

  • Ricoh Aficio SP C240 SF filter quit unexpectedly - running 10.9.3 on MacBook Air - can anybody help please?

    Problems with Ricoh Aficio SP C240 SF- message tells me  "filter quit unexpectedly" - running 10.9.3 on MacBook Air - can anybody help please?

    Steve --
    You have made an extra folder called "Internets" and put the Safari app in there.  It (and all other apps) need to be freestanding (not enclosed in another folder) in the HD > Applications folder.
    Because it's in this folder, it has not properly updated.  Running 10.8.2 OS, you should be up to 6.0 Safari.  But because it's in a folder, it's still way back there.

  • Question from a customer: If I download it to my MacBook Air can I share it to my MacBook Pro and or vis a vis?

    I had the following query from a customer, and I don't know the answer. Any help would be much appreciated.
    Regarding the Adobe Photoshop Lightroom 5 Software Download card:
    If I download it to my MacBook Air can I share it to my MacBook Pro and or vis a vis?
    Thank you in advance.

    A Lightroom license can be activated on any two installs regardless of platform but the use of only one at at time is permitted.

  • My macbook air can't share internet

    i don't know why my macbook air can't share internet to my iphone5 or any other phone even when its connected to internet

    Hi riteah,
    Welcome to the Apple Support Communities!
    Internet sharing is something that you can do with your MacBook Air. Please read over and use the following article as a resource. If you have tried these steps and are getting an alert or failure, please respond with the alert that you are receiving.
    OS X Mavericks: Share your Internet connection
    http://support.apple.com/kb/PH13855
    Have a great day,
    Joe

  • My Macbook Air can delete files and folders and take them to Trash Can but cannot delete from Trash Can . Cannot empty trash securely.

    My Macbook Air can delete files and folders and take them to Trash Can but cannot delete from Trash Can . Cannot empty trash securely.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Maybe you are looking for

  • Kernel 2.6.25 upgrade = MadWifi: unable to attach hardware [SOLVED]

    Hello, After I upgraded my kernel to 2.6.25 on my laptop with an Atheros AR242x, which I use normally use MadWifi with, stopped working. I am unable to get any wifi0 or ath0 device to show up in ifconfig. The most descriptive error I could pull up wa

  • How to install and configure RSYNC on Solaris 10 SPARC

    I am trying to setup two Solaris boxes to sync their two mount points in real time using RSYNC. If any update happens on Server A it should reflect on server B automatically. Use CRON or as system SERVICE, which is best? Servers are on WAN link and a

  • Lenovo Q180

    I have bought recently the Lenovo Q180 and i have a strange issue with displaying picture over HDMI port. I'm having windows 7 installed on it and from time to time looks like my Lenovo is loosing picture on hdmi and tv shows the black screen, and af

  • Weblogic 6.0 SP2 with JDK1.3 as a Win2kPro Service Fails

    I have installed the weblogic server 6.0 with sp2 with the intergrated jdk1.3.0. Everything seems to be fine when I manually run it. Bun whenever I am trying to run as a win2k service it fails. To be more specific whenever I am trying to start the se

  • APEX with HL7

    Hi actually i don't know if i am in right place but i'm trying anyway. I am working on HIS System which is developed by Apex, The problem is, i want to send message to RIS System by HL7 messages , for example i want to send message to RIS system cont