I don't see Time Intelligence Calculated members in Universe

Hi there,
I use Universe (BO XI 3.0) designer over MSSSAS 2005. I created calculated member for Time dimension using wizard for YTD, MTD calculations. I can browse the results from cube no problem. But then I created a universe on top of my cube and tried to connect that universe from Desktop it doesn't show those calculated members at all.
Could you advice any tricks or tips that allow to solve a problem, please?
Any help is greatly appreciated.
Thank you,
Michael

Michael,
A universe contains only metadata: dimensions, hierarchies and levels
The only members defined in the universe are the measures.
Other members are only accessible and visible in the final document or in the list of values.
So concerning your calculated member, if it is not linked to a particular hierarchy and linked to a parent I doubt that we will see it in a document. But for sure you will never see it in the universe.
Didier

Similar Messages

SSAS Multidimensional Time Intelligence YTD calculation showing BLANK for Date level

Hi there,
I am working with SSAS Multidimensional Cube, basically I have defined a Time Intelligence calculations for just YTD in the Cube, the calculation was created in the Calculations tab of the cube as follows:
/*Year to Date*/
[Dimension Dim Time].[Calendar Dimension Dim Time Calculations].[Year to Date],
[Dimension Dim Time].[Year].Members,
[Dimension Dim Time].[Date].Members
=
Aggregate(
{ [Dimension Dim Time].[Calendar Dimension Dim Time Calculations].[Current Dimension Dim Time] }
PeriodsToDate(
[Dimension Dim Time].[Calendar].[Year],
[Dimension Dim Time].[Calendar].CurrentMember
My Calendar hierarchy is as follows:
Year -> Quarter -> Month -> Week -> Date
The problem I have is that when I am at Date level I am not getting the cumulative YTD value, instead I am just getting blank cells:
Could anyone help me defining a Time Intelligence YTD calculation that works for all levels including the Date (highlighted in yellow above)?
Thanks and best regards,
Joss

The only strange thing is the MDX script, I would have used this one instead (sse below) - but if this is not the issue, I would suggest you to isolate the issue in a simpler MDX script removing any other calculation.
Also take a look at the DateTool solution for these calculations - I really don't like the wizard provided by the development environment, it has other issues but not something that should affect your calculation:
http://www.sqlbi.com/articles/datetool-dimension-an-alternative-time-intelligence-implementation
/*Year to Date*/
[Dimension Dim Time].[Calendar Dimension Dim Time Calculations].[Year to Date],
    [Dimension Dim Time].[Calendar].Members,
[Dimension Dim Time].[Date].Members
=
Aggregate(
{ [Dimension Dim Time].[Calendar Dimension Dim Time Calculations].[Current Dimension Dim Time] }
PeriodsToDate(
[Dimension Dim Time].[Calendar].[Year],
[Dimension Dim Time].[Calendar].CurrentMember
Marco Russo http://ssasworkshop.com http://www.sqlbi.com http://sqlblog.com/blogs/marco_russo

At the time of settlement of cost collector, I don`t see right FI entries.

HI,
at the time of settlement of cost collector, I don`t see right FI entries.
Сost collector is confirmed, WIP is calculated, variance is calculated. Cost collector has status VCAL.
Cost collectors saldo = 3000,00
WiP = 3500,00
Variance = -500,00
and it is right. But at the settlement I see
Factory Output (Cr.) & Price diff from Prod (Dr.) 3000
Where are WIP and Variances???. I don`t imagine any reason why system don`t see WIP and variances by settlement.
Best regards,
Yuy
P.S.
ML is active.
Edited by: Yury Pogorelov on Jul 5, 2009 9:59 PM

HI,
If there is more GI and less GR, system calculates WIP and values are posted to WIP G/L. That will be reversed to Cost object on next day of WIP run. This will not be considered for Settleemnt.
Variance is the calculation of actual and plan. That is just a calculation and nothing to do with any accouting entries.
U have got some 3000 in price diff. account and that has come from diff betweeen actual G/R and material master price of the material.
Vijay

I have multiple lines for family members on my account. Can I still transfer upgrades between lines? I don't see the option any more.

I have multiple lines for family members on my account. Can I still transfer upgrades between lines? I don't see the option any more.

More everything. I have one line coming up on the 19th of this month and I'd like to transfer to another user with a later upgrade date. Just not seeing the option anywhere.

HT204053 I have multiple devices used by family members, how do you make sure the kids don't see Moms messages from Dad and visa versa?

I have multiple devices used by family members, how do you make sure the kids don't see Moms messages from Dad and visa versa?

Hi Roger:
Thanks for the reply. I think I figured out the problem. Apple has confused (at least in my mind) the different IDs that people can have. In the iCloud settings, they use the term Apple ID and not iCloud ID. I guess there really is no such thing as an iCloud ID. There are Apple IDs with various attributes. This is not clearly explained or easy to see (how could I look up to see if my Apple ID is associated with iTunes for example?).
I created, what I thought were iCloud IDs for each family member, but we all use my Apple ID for iTunes.
One other question - why does the syncing of Notes using iCloud require an @me.com email account. That makes no sense to me.
Thanks for your help!
AO

HT201496 Hai there. I am facing trouble with my garageband apple loops.i don't see apple loops in my browser since quite some time i don't know what has happened to it and how it happened . i just wanted to learn some of basic things about music.can you h

Hai there. i am having a trouble with the garage band apple loops to get into my macbook pro. . i had it some time back and i dont know where it has gone and how it get it back. is there anyone to help me to get the loops back into the browser . i will be grateful to you if some one can help me with it/ thanks.

First check, if you do not accidentally have hidden or filtered your loops:
Uncheck the "Filter for more relevant results" option in the Audio tab of the GarageBand Preferences.
And the drop down menu on top of the Loop Browser should be set to "Loops", not to some Jam Pack or other collection.
If you still don't see any loops, check if you have set your project to a special signature, like 9/8, for that no standard loops do exist.
Then check, if any loops actually are installed in your system Library: Depending on your GarageBand version you should find the standard loops in the Audio folder of your system Library (Application Support > GarageBand):
Your System Drive > Library > Audio > Apple Loops
If the Loops are installed, but GarageBand does not show them, you need to rebuild your Apple Loops Index: See the FAQ for how to do it:
Re-Index GarageBand's Loops
This requires two steps:
erase the old Apple Loops Index by deleting everything in
Your System Drive > Library > Audio > Apple Loops Index
and then rebuilding the Loops Index by dragging the folder containing all of your loops onto the Loop Browser in GarageBand.
If no Loops are installed in your Library, you will have to restore them from your Backup.
Regards
Léonie

I migrated info from a hard drive to a new mac under time machine. It says I have shared files, but I don't see the old info on the new machine. Where do I look for it ? How do I make the old backup the base for my new macbook ?

I migrated info from a hard drive to a new mac under time machine. It says I have shared files, but I don't see the old info on the new machine. Where do I look for it ? How do I make the old backup the basis for my new macbook ?
The old OS was Mac X 10.5.8. I think the new one is 10.7.2 Lion.

Have a read here How do I set up a new Mac from an old one, its backups, or a PC?
Stefan

How do I get a refund? I have tried to use this converter to change a PDF to a word document or excel document three of four times and it always fails.. I want my money back but don't see any way to communicate with Adobe.

How do I get a refund? I have tried to use this converter to change a PDF to a word document or excel document three of four times and it always fails.. I want my money back but don't see any way to communicate with Adobe. i really just want my money back. Very disappointed. Also disappointed that it is so hard to find a way to communicate with Adobe that I have to resort to asking this question in this forum.

You need to use the CHAT link in support to reach Adobe staff. Be sure you know the product name you are trying to cancel, Adobe have lots of products, several converters etc. I think it is ExportPDF you have, most likely.

Hay. i change the screen LCD in IPAD 2 3G but i don't know what happen. She was working and every thing it's ok. One time i turn off the ipad and turn on more time, i don't see good in LCD the brightness is to low and i can see any thing

Hay. i change the screen LCD in IPAD 2 3G but i don't know what happen. She was working and every thing it's ok. One time i turn off the ipad and turn on more time, i don't see good in LCD the brightness is to low and i can see any thing!! and i want to know why is happen

Assuming you mean that you performed the repair yourself, it would seem that you either obtained a defective screen or you did some sort of damage when you replaced the screen. You can try asking for assistance on ifixit.com, a site dedicate to those attempting their own repairs, or you can take the iPad to a shop and pay them to try to correct the problem for you. Apple will no longer touch your iPad now that you've attempted your own repairs.
Regards.

When I go to settings and choose phone settings I don't see face time activation icon

When I go to settings and choose phone settings I don't see face time activation icon

Where did you get the phone? Facetime is banned in Saudi Arabia and UAE. If the phone came from one of those countries, it is permanently disabled and can not be added to the phone.

Trying to resolve a blinking amber light on my Time Capsule. The problem is i don't see the airport utilities under Apps/Utilities..any ideas?

trying to resolve a blinking amber light on my Time Capsule. The problem is i don't see the airport utilities under Apps/Utilities to try and reset..any ideas?

AirPort Utility should be here: Macintosh HD > Applications > Utilities > AirPort Utility
If it is not there, you can download it from here:
http://support.apple.com/downloads/#airport
Temporarily, connect an Etherent cable from your Mac to one of the LAN <-> ports on the back of the Time Capsule
Open AirPort Utility - Click Manual Setup
Click directly on the word Status (2nd line) and a window will open to explain why the Time Capsule is complaining along with suggested actions to remedy the issue

Every time I try to sign on, I only could type USER ID but I don't see any place I can type in password. It leads me automatically click on sign on, then it is always error message that I had wrong ID or password or if I forgot. I didn't forget my passw

Every time I try to sign on, I only could type USER ID but I don't see any place I can type in password. It leads me automatically click on sign on, then it is always error message that I had wrong ID or password or if I forgot. I didn't forget my password. I have problem to see the place where I should type in password. There were not around sign on screen. Where is it?

Have you tried this: My Verizon Forgot Your User ID

TS1337 I don't see [Preferences] or [Change Disk] when I click on Time Machine

I need to change my backup volume for Time Machine. But I don't see [Preferences] or [Change Disk] when I click on Time Machine from the System Preferences.

SharonLee123 wrote:
As I stated, I'm not a mac person, so sorry about that.
Not a problem. That's what we're here for.
It's currently backing up a sub folder onto an external drive (my backup drive). This is why I looking for [change].
I am trying to backup everything on my data/application Drive, from the Root, so it gets everything on the drive.
By default, Time Machine will back up your entire system. If you're sure it's only backing up one folder, you (or someone) must have excluded all sorts of other things. Click the Options button on the Preferences window to see the exclusion list.
It should look something like this:
But with lots and lots of exclusions.
I suspect your whole Mac really is getting backed-up, but you're just not seeing them. What you see in the "Star Wars" display depends on what's on your screen when you Enter Time Machine. If you have a Finder window showing just that sub-folder, when you Enter Time Machine that's all you'll see.
If you start with a Finder window showing, say, your home folder, that's what you'll see in the "Star Wars" display. If your Finder windows have sidebars, once in Time Machine you can select other things in the sidebar to display.
You might want to review the Time Machine Tutorial, and perhaps browse Time Machine - Frequently Asked Question #15A.
Don't hesitate to post back if you still have questions or problems.

Mavericks don't see my backup in Time Capsule

Good morning guys .
My Mac was too slow because of many updates coming , and decided to do a " clean" installation of Mavericks .
Before , I did as the usual backup on Time Capsule .
After installation , I try to restore the backup and migration wizard by surprise: the Mavericks don't see the backed up .
Note : I can access the Time Machine , in Finder , it mounts , I see that everything is there , but the backup is not read by the migration wizard .
I did several things I saw on the forum and the closest I came was to create a new backup , and then try to restore again the migration wizard or the system restore, this reads like the Mavericks backup but surprise, only backup that I created or backups made in 2012 ( before the system can be upgraded to the Mavericks ) . All backups made in 2013 he did not read , it is as if there were .
Has anyone experienced this and can help me ?
My mac : Macbook Pro 13 Late 2011 2.8 Ghz Intel Core i7 , 8GB Ram
Regards and thank you .
Daves

ruderudy,
If you don't see any Movies underneath the "Sync Movies" portion, a good step to try is resetting sync history.
Mac OS X 10.5: Resetting the SyncServices folder
http://support.apple.com/kb/TS1627
Hope this helps,
Raleigh

I don't see any videos with Mozilla(better:sometimes I do,most of the times no)

After years of using Mozilla,it's the first time i really want to stop using it.The problem is with videos(youtube ,but also others in different sights).Some times I see a video,sometimes i don't(see only a black screen),but when i deactivate the Scock wave flash 11...I can see the video,then in other videos I have to activate it again and then I can seevideos,then in other videos I don't see anything,with or without ShockwaveFlash!!!!What the h...ll...!!!On the other side,I don't have any problems with Explorer or Chrome.I have Windows XP,the latest Mozilla(19) and the latest Adobe Flash Player 11.6.602 .Before 6 months I never had such a problem .

You might get more adept advice on the iPad forum.
It tells you to do videos because they take up a lot of room, then pictures. If you have tons of music on there, or other media then you can fill up a drive pretty quickly. You'll have to do an inventory of how much is on there.
I don't know anything about iPads but if they are anything like computers you need to empty the trash to actually free up space from deleted items.

I don't see Time Intelligence Calculated members in Universe

Similar Messages

Maybe you are looking for