I don,t understan how to get projecter my iPhone, I don,t understan how to get projecter my iPhone

How to getting projector

Please explain in more detail exactly what you want to do. Your question is not very clear.

Similar Messages

Just imported clips and edited as new project. closed imovie. came back later and the entire project was gone. i was not done so i did not finalize it. how do i get the program to keep my project in progress

running imovie on a powermac w 10.6.8. went through the tutorials. imported my clips, got the hang of basic editing, and created a project.
was pretty happy with it, but needed to shut down and come back to work on it later. when i did come back, the entire project was gone.
how do i get the program to save my work in progress, without finalizing it?
thanks

So, everything worked out just fine!
I have all my material in the ProRes Codec on a seperate drive now. The project itself was kept or rather duplicated, the bin structure etc stayed the same but is linking to the newly created files. The playback and workflow is fluent. I am happy!
Time info: For about 120 GB of material the codec change process took 25 hours.
Thanks for your help!
Best
*a

Actually i don't know where to post this, but I'm MBA student and have to do a project about the HR functions in a famous company. and I'd like to talk about Apple inc, so how can i get some information about that, and who can help me in this?

Can anyone help me in this?

Sara ~ Apple's mission statement is HERE. But the following statement from Apple's now-CEO Tim Cook during a quarterly earnings conference call on 21 January 2009 may give more insight:
"There is an extraordinary breadth and depth and tenure among the Apple executive team, and these executives lead over 35,000 employees that I would call "all wicked smart". And that's in all areas of the company, from engineering to marketing to operations and sales and all the rest. And the values of our company are extremely well entrenched.
We believe that we're on the face of the Earth to make great products, and that's not changing. We're constantly focusing on innovating. We believe in the simple, not the complex. We believe that we need to own and control the primary technologies behind the products we make, and participate only in markets where we can make a significant contribution.
We believe in saying no to thousands of projects so that we can really focus on the few that are truly important and meaningful to us. We believe in deep collaboration and cross-pollination of our groups, which allow us to innovate in a way that others cannot.
And frankly, we don't settle for anything less than excellence in every group in the company, and we have the self-honesty to admit when we're wrong and the courage to change. And I think, regardless of who is in what job, those values are so embedded in this company that Apple will do extremely well."

I don't understand how to get audio from itunes into my project

i am new to elements but have some basic understanding, but I can't get any audio into my project from itunes, just keep getting an error.

BeeW
Thanks for the follow up.
On your computer hard drive, are you seeing .m4p or .m4a for this file?
Please check out the following online article on iTune music conversion to .wav (especially when DMR is involved).
http://www.aimersoft.com/itunes-drm/itunes-to-wav.html
But, going with your latest
the error is @the importer reported a generic error'
when i select the file to import it shows .MTS, in the error message it shows .m4a
all a bit confusing.
The first line of the above is consisted with having to convert the iTunes music to another format, preferred .wav (DMR or other reasons)
But there is something wrong with that second sentence. I have never seen iTunes music with an .mts file extension. Typically you see that with a video file with AVCHD compression (1080 variety). So, please take another look at the properties of the file that you are trying to import...video or audio? On the other hand, m4a is a MPEG 4 audio file.
Could you do a screenshot of the error message where you are seeing ".m4a" in it?
We will be watching for your follow up. Do not give up. We will figure this out.
Thanks.
ATR

IPhoto project will not upload even in safe mode when trying to buy book, any suggestions on how to complete the "BUY BOOK" process. Christmas gift, really need to get this done, have worked MANY hours on putting it together. Please help!

Iphoto book will not upload even in safe mode when trying to buy book, any suggestions on how to complete the "BUY BOOK" process?

Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the fix below:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
After each run thru the repair process see if you can create a PDF file of the book as described in this Apple Document: iPhoto '11: Preview a book, card, or calendar before you order or print it. If you can try ordering the book. If you can't finish trying all of the otpions and then boot into Safe mode and try there.
OT

How to get a list of file paths for all files used in a project

I have a project in Premiere Pro CC which has a large number of bins. A sequence in one of these bins uses files from other bins. I am trying to find the locations of all each of the files used in the project.
1) Obviously I can select each clip in the timeline and show in finder, but there a lot of clips
2) The video usage associated with each file in the project would help. However
1. I haven't found a way to display only clips that have video useage if all of the bins have not been expanded.
2. Video usage shows usage for all sequences, so one would have to manually check the pull down for each file to see if it is used in the sequence in question.
3) I tried exporting the project to final cut pro xml. The path url gives me the information that I need. For some reason, however, when I do the export only one clip's information is there, not the information for all of the other clips in the project.
4) I tired an export for speedgrade and all of the file names are there. However the paths are not.
Basically I want to find all of the files in the project and relocate them to a specific folder for that project. There's got to be a way to do this but I'm not seeing it ....

Thanks for the suggestion concerning the file path. And certainly it would have been nice to have done this before beginning. However this is a project that has been around for quite a while, and the files have been moved into different bins. And now the project sequence is being revised.
So the problem is, worded slightly differently, how can I search all of the bins for the files that are used just by this sequence, ignoring the files which are used by other sequences? Or, how can I get a list of the file paths of the files that are used in the sequence?

How do I get Vienna Instruments (VI's) into a Logic Project?

so, I'm running an IMax OS X 10.6.7, with Logic Pro 9.1.4
I recently downloaded Vienna Symphonic Library Special Edition and Special Edition plus, the latest version. Everything is now downloaded and ready to go, and I have started messing around with patches, saving matrices, etc. on the standalone Vienna Software.
So my question is, how do I import the VI's into a Logic Project? I have read the Logic Manual, and it doesn't provide detailed instructions on how to do this. When I look at the Allowable VI plug ins in Logic, it shows the vienna instruments there, but I just don't know how exactly to go from having the matrices saved in my custom folder, using them with the standalone vienna player to actually using them within a Logic Project to create midi regions/tracks, and turn old midid regions/tracks that were created with Logic instruments in to tracks/regions with the Vienna Virtual Instruments.
Help?

Yes, I know how to run a software instrument. I actually figured out how to do this on my own, and am assuming that it is the best way. I just loaded any software "Logic" instrument, and then loaded the Vienna matrix into a plug in slot.
So that seems to work, but now I have more questions. Do you use Vienna?
If I already have a violin region recorded on a Logic instrument track, I have realized that i can just copy and past it onto the new track with the Vienna plug in and it will adopt those settings, but my question is this:
Vienna seems to make a big deal out of being able to play all the articulations of one instrument on just one track, with keyswitch controls, etc. But if I'm working with Midi data on a track in logic and I'm not performing all the parts "live" while recording, how do I get the articulation changes to stay in place, so that I can have a violin play staccato, legato, and pizzicato all in one track, without having to manually hit the keyswitches to change the articulations while the track is playing? obviously I can't do this while bouncing, or with multiple tracks at once, so how to you create a single track with multiple articulations in Vienna, plug it into a Logic Track, and have it playback with the changes in articulations, without having to manually change it.
Any ideas?
I have a lot of multi track orchestral projects composed using logic instruments, but I want to get all those over to Vienna Instruments as well. What would be the easiest way to do this, with consideration to my above question concerning one track for multiple articulations of an instrument?

How can I get more than 5 items in my Recent Projects list?

After a rather horrendous incident with trying to do a series of videos all in one project using bins and shared media and a savefile that got *WAYYY* out of hand (20 minutes to load the file)- which I believe was tied to importing media from another .proj file, I have switched to a more modular approach with anywhere from 2-5 projects in each project and now a collection of around 15-25 projects on the go. Most of these are "work on a chapter, then change to another project while waiting for footage for another project" and several of them share pieces including multicam segments and sync'd audio.
Rather than importing from another project, I am using Control-C, switch to a different project file, then paste in. This isn't the most "Adobe Professional" style way of doing things, but considering that I lost several hours to trying to recover from the last project, even when I only needed to spend 20 minutes pumping out a rough cut, I'm not going back to that method until my next computer upgrade and until I begrudgingly switch to CC in around 1-1.5 year's time.
So the issue that I'm faced with is that I'm often using the Open Recent Project flyout and having 5 projects on that list is just not enough to be remotely useful.
In MS Office, the list is quite long and even in photoshop, I can get 10. That's enough for my Photoshop, but I switch projects using the Recent Projects list in Premiere a LOT more often. I could just use my explorer windows to jump around, but given that I have 5-6 explorer windows open per project most of which are folders crammed with footage, PSD stills and peak files, plus other non-video things I'm working on right now, that's really not the simplest way to navigate at a glance.
How can I get 10, 20 or 25 items in that flyout list instead of mucking about with 5?
I run Adobe Production Premium CS6.

I see a lot of people not reading the circumstances of what I said.
I did mention that currently I use the "explorer" method and it's kind of clumsy. Although I liked the idea of using shortcuts. I had thought about moving the files, but didn't think about shortcuts... considering everything on my desktop is a shortcut, I'm really not sure why I didn't think of that.
But I did mention that I almost always have anywhere from 12-15 windows open at any given time in my explorer. I am involved with management of 4 different companies right now, two of which are in startup mode. Videos are important for me, but not my only duty. These windows only go down when I shut down my computer, which happens on average once every 4 months. It is not a problem on a reasonably capable system.
Still, for a project of currently 23 files (just got increased to 28 and expected to rise to 32-35), and because I have had project files go sour on me, I keep some hierarchy and because I don't have 100% creative control over all my projects, I also occasionally have to do re-overs ie when a specific style of writ is nixed by a boss or customer. Those 23 project files also have version iterations.
So navigating 'at a glance' through a file explorer isn't always the most practical.
In the end, I'll probably try to find some time to re-organize my file structure using shortcuts.
Still, given the number of 'recent files' can be modified or is larger than 5 in: Windows Start Menu, Recent documents, Adobe PDF recent documents, Adobe Photoshop, All Office suite programs...
It's just weird that there's only 5 for a program intended for the kind of people that work on projects somewhat larger in scope than "hey, we took the dog to the park the other day".
@Jerry Klaimon - not sure what version of Premiere you're using, I'm using CS6 with Production Premium CS6. Recent files only shows 5. Photoshop shows 9. For my current workload, I'd probably want 10-12 and it would be nice if they could go to 20 or more IMHO. Look at History states. History states default to 20. I usually set this to 35 whenever I set up any user's computer. It's easy to choose what suits me from the preferences menu. I don't see why they wouldn't have the same idea for 'recent files'
@anyone who thinks I'm stupid - please feel free to insult me. A forum scuffle is often a great way to get the attention of moderators who might be in a position to pass this idea on to someone who could do something about it. I'm also anal, stubborn, holier-than-thou and not-as-smart-as-i-think-i-am if you want some ideas to get started .
@Steven Gotz - you are quite correct that asking is important. Probably a smarter thing to do before pestering the devs with feature requests is to thoroughly check to see if it is in fact already existing. Adobe products are famous for having features that nobody knows about. Most of the questions I have that Google or Lynda.com didn't answer have been answered here in the forums. Then once I've seen that a few hundred pairs of eyes sharper than mine have also come up with nothing, then perhaps it might be worthwhile sending in a feature request. In this case, I will probably toss a feature request in later, but I'll probably just use your idea of keeping a master project folder with shortcuts.
@MarkMapes - I do not have a problem loading files. Project files load just fine for me. But I have one project file that has a problem that loads a HUGE amount of RAM and takes nearly 20 minutes to open. It even takes almost 8 minutes to close it. It was acting as my master file with everything nested in sequences and I needed to spend a whole afternoon to pull those sequences out using copy-paste because bringing them in via Import Sequence brought the problem into the new file. I would file that under "glitched save files" rather than "slow loading".
@Jon-M-Spear - good idea too - although I did cringe a bit at the suggestion of putting things on the desktop. I have bad habits and I work very hard to try to make other people who have worse habits in this company to try to get them to not keep anything on the desktop. In fact, it's probably my favorite thing about Windows 7 that you can have a clear or nearly totally clear desktop.
Thanks for your comments folks.

How do I deal with project bloat? Long Save time is getting worse?

Here are the FB posts I have got about this issue. I tried to paste them neatly but didn't work.
To be honest I am baffled that such an advanced NLE has so many issues. There should be a warning about the Warp Stabilizer messing up a project I had no idea till now.
This was my question to a PP user group on FB.
I am cutting a 60+ minute doc with lots of source material and the project takes a dogs age to save now which is beginning to interrupt my workflow. I would have thought the save would take less time depending on how much work was done since the last save. I suppose working with Proxies might be the solution but I am already 70% done.
Here are the responses
Saving the project file on an SSD might be a good idea.
Your project size is slowing you down. Create a couple of projects, each containing a part of the footage. Organized in bins as needed. Call them footage projects. Create an other project named edit and cut in there. Use the media browser to browse the footage projects. Import what you need and use search bins to keep it organized.
If you didn't transcode your footage before you started the project it could be part of the problem. And like the other post says only having the footage you are currently working on will also help. The claim that you don't have to transcode when working in Premiere is misleading because in most cases when working with many different source codecs transcoding will always improve your computers performance.
I had the exact same experience cutting a 90 min feature with 120 hours of Pro Res 4444 footage. Long save times are caused by project bloat, either by having too many assets loaded or a lot of warp stabilizer effects applied. Transcoding will only affect playback performance and exports - it doesn't sound like it's the problem in this case.
only some codecs (4K GoPro, 6K R3D, lengthy h264/AVCHD clips for example) benefit from transcoding and will be snappier and playback smoother. But transcoding will never ever help the loading or saving time of your project
Don't apply warp stabilizsr to everything. All those coordinates get stored in project file
All I can say is that I worked on a Premiere project in November where my computer spent up to 5-7 minutes scanning through all the different directories with footage after the project was open before I could play back the sequences in my project. I ha...
some of the ftg is in need of stabilization so I did use the warp stabilizer but not excessively. 15 x 3-10 second clips. Is there a way of managing the storage of the coordinates too minimize the hit on the project size?
nope. Try importing existing project into a new project.
I usually stabilize footage in a separate project to avoid huge project files, and export the stabilized result. Then I use the stabilized version in the main project.
I also work with Nested Sequences a lot. Working in short, manageable timelines. When opening a large project, Premiere will find the footage for the active sequence first, so I can start working quickly, while Premiere is still finding the rest of the footage.
Could do your warp stabilizing in AE and export renders of them, then import those renders into your project so the are just media files instead of files with stabilizer tracking points.

I usually stabilize footage in a separate project to avoid huge project files, and export the stabilized result. Then I use the stabilized version in the main project.
That would be something like the advice I would have given
and more likely...
Save heavy duty FX application until after you have locked down your edit. (eg Blurs , Warp, 3rd party FX(MB)
I Create separate sequences or Duplicate Projects for many reasons. eg CC/Grade and
Warp Stabiliser ...definitely. Its even has a slow save impact on After Effects Projects!

IMovie won't share/export my project as it says 'not enough disk space' - how on earth do I get this movie onto a DVD?

I really hope someone can help me please?
I have a 16GB iPad and have created a really nice wedding DVD for my sister. It consists of about 20 mins worth of video clips and 25 mins of images set to music with movement between slides etc. I have cleared absolutely everything off that's possible from my memory and I can't seem to get the iMovie project off my iPad! My storage says that 8.7GB is taken up by iMovie and I've deleted all photos from my camera roll as iMovie can run the project without them, it doesn't cope without the video clips though (tried that!)
I hve now tried exporting to iTunes and it says I don't have enough disk space - I don't understand how it can't just lift the project off my iPad without having to consume yet more storage? I have also tried exporting to camera roll trying 1080pHD - too big. It started on the 710pHD and got all the way through exporting (around 30 mins) and then at the end told me I didn't have enough disk space. Funnily enough, iMovie was only taking up around 6GB of space prior to this, so it's storing this failed attempt to export some how but I can't see how I can get rid of that.
I am heartbroken that I've spent three months doing this and now can't transport it from my iPad by seeminly any means possible. I don't want to just give up. I've seen other threads that say 'go to my computer and look in the DCIM folder and it's there... but it's not. All the video clips are there but not the actual project.
Any help anyone can give would be so much appreciated. Is there a way I can do this without essentially having to give up on apple products and buy some video editing software for my PC. Which isn't a MAC by the way. As you can tell, I was hoping to screen this movie on Christmas day for the family :-(
Jessica

Are any of your apps video players? Some app store apps contain a file you can't see which saves logs of everything you do. Say if you have had an iPhone for 4 months and watched 50 videos with a video player these 50 videos may have been copied to the log file inside the application and may be what is using up all your disk space. Delete all video player applications from your iPhone.
If that doesn't solve the problem copy the photos to your computer and restore your iPhone with iTunes back to factory settings and when you have restored DO NOT "restore from back up" because that might restore whatever is causing the problem instead DO "set up as new iPhone". Once you've set up your iPhone sync apps, books music, photos...etc back to the device.

I used to see a monthly "Feb 2014" photo stream category in my library for each month. Now all of my photo stream photos (from my iPhone) are under "iCloud" under "Sharing" and I don't know how to get my pix out of there and separate them into libraries

My computer has changed how it accepts photos from my phone. They used to post into a library by the month and year, e.g., "Feb 2014 photo stream," but now all of the photos from my phone for the past year or so are lumped together into the "Shared" section under "photo stream." I did not put them there (that I know of) and now don't know how to get them out and into a library where I can categorize them.

The monthly events "Feb2014" will show you all photos that have been imported from "My Photo STream", if you have enabled "Automatic Import" in the "Preferences > iCloud" tab.
The albums you are seeing under "iCloud" are the "Shared Photo Streams" and "My Photo Stream". To import from your "Shared Streams" drag the photos frommthe Shared Streams album to the Projects in the library panel.

How to get path of a VI used in LV project?

How can I get the path of a VI used in LabVIEW project?
Actually I want to replace the VI used in LV project by saome other VI, and I think it can be done if I get the path of the VI already present in project and replace that path with path of the VI which I want to include in that project.

There are several ways to replace a VI, say "MyFirstVI", with another, say "MySecondVI". The method you use will depend on several factors, including
the version of LabVIEW you are running
whether the VIs are in a LabVIEW Project or not (if they are, I'm assuming they are in the same Project)
whether you want to replace all MyFirstVI instances with MySecondVI, or selected ones
the size (number of VIs) of the Project.
As noted, if you want to replace all of MyFirstVI with MySecondVI in a Project, here is one way to do this:
Close the Project. You do not want to do this with Project open.
Rename MyFirstVI to MyOldFirstVI.
Rename MySecondVI to MyFirstVI. If MySecondVI already exists in the Project, you might want to Copy it instead of Rename.
Open the Project. Find and open an instance of MyFirstVI, verify it has the code of MySecondVI.
In Project Explorer, find MyFirstVI and rename it MySecondVI.
Exit Project. Rename MyOldFirstVI back to MyFirstVI.
At this point, all of your VIs have their "original" names, but in, say, Main.vi, wherever MyFirstVI was called, you should see MySecondVI.
For doing selective Replacement (or even total replacement where you want to actually see all of the instances where replacements are made), you can use QuickDrop to your advantage. You need to have in memory the VIs that use MyFirstVI, and also have MySecondVI in memory. With the Project open and the relevant VIs in memory:
Open any VI that shows MyFirstVI on the Block Diagram. Right-click it and choose "Find All Instances".
When the search is done, you need to "visit" each of the found VIs -- use Ctrl-G to do this.
When you find an instance of MyFirstVI, type Ctrl-Space to activate QuickDrop, start typing MySecondVI until it appears on the Selection line (if you are lucky, you will only need to type MySec and it will find the correct VI), then type Ctrl-P to replace MyFirstVI with MySecondVI.
Type another Ctrl-G to go to the next instance of MyFirstVI and replace as needed. When you've replaced all of them (or all that you want to replace), stop.
Bob Schor

While creating a project in Garage Band my sample tracks were cut short then overwritten in soundtrack pro. Any ideas why? and how to get my tracks back?

While creating a project in Garage Band 09 my sample tracks were being cut short- I then discovered they had been overwritten in soundtrack pro.
Any ideas why? and how to get my tracks back?
I never opened soundtrack pro to edit the track just Garage band....the track just mysteriously saved as half the track.
I am running Lion and I upgraded my Garage band to '11 hoping it would resolve the issue...it didn't. Now I can't find that tracks at all.
The 2 songs having the issue are titled Exotic Yearning and Reunion.
I am in the process of reinstalling the audio content from my discs. I just don't want to run into this again.
Any thoughts and help would be greatly appreciated!
Thanks!

After spending some time reinstalling the soundtrack pro 3 content I opened the full track called Reunion.
It showed back up in Garage Band.*It was the full track and wasn't chopped off until I dragged it onto the project. Then it showed up chopped.
Then I closed Garaged band and opened soundtrack pro 3....The song was again chopped off at the 1:33min mark
Very Frusterated...:(

How to get timesheet information in a javascript (Project Server 2013)

Hi all,
In Project Server 2013, I'm trying to customize the Timesheet ribbon. This far, I've been able to add a new button and tie an event to it. All is working well. This is all done using elements.xml and a javascripts.
Now the problem is that I want to get some informations about the timesheet (the Guid for example) and, for now, I've got no success. I know that there is an object called PS.TimeSheet, but when I try to use some PS.TimeSheet's methods I get an error.
Note that i'm in the page http://servername/pwa/timesheet.aspx (there is not Guid in the address) and all the treatments should be done in the javascript (no call to another aspx page)
Thanks !

Finally, I've found the solution.
My goal was to add a button in the timesheet ribbon to launch a special report showing some data about the timesheet. The report has the timesheet Guid as parameter.
To customize the Sharepoint ribbon, you have to do it via an xml file and a javascript (a lot of explanation is available in the internet that explains how to do it). So I had to call a function in the javascript to launch the report (which is a SSRS report).
When you are in a javascript you have access to many global variables. When the timesheet.aspx is displayed, there is a global variable called "timesheetComponent".
Using this variable we can call the method :
timesheetComponent.m_consumedApi.get_Impl()
to get an implementation of the current timesheet. This implementation has an attibute that has a lot of nice stuff about the current user and the current time sheet. This attribute is
_headerInfo
_headerInfo is a structure that includes tsUid which contains the timesheet Guid I was looking for.
Finally, the function attached to the button goes like this :
function _LaunchReport() {
var tsUId;
var rptPath;
var tsImpl = timesheetComponent.m_consumedApi.get_Impl();
try
if (CONST_REPORT_PATH == null || CONST_REPORT_PATH == "" ) {
alert("Constant CONST_REPORT_PATH is not defined")
else {
tsUId = tsImpl._headerInfo.tsUid;
rptPath = CONST_REPORT_PATH + 'TimesheetDetails&rs:Command=Render&rc:Parameters=false&TimesheetUID=' + tsUId;
window.open(rptPath);
catch (Err) {
alert(Err)
CONST_REPORT_PATH is the path to SSRS defined elsewhere
I hope this will help some other poeple !

All of my sequences are gone and I don't know how to get them back.

I pressed the close all button in the program window and now everything is gone. How do I get all my sequences back into my time line?

Um...everything should be in the "Project" panel. If you don't know where that's at, click the "Window" menu, then "Project".
Double-click on your sequence and it will open up in timeline view.

I don,t understan how to get projecter my iPhone, I don,t understan how to get projecter my iPhone

Similar Messages

Maybe you are looking for