I don't understand how to use the System Font Panel with iMovie.

I need an explanation of how the System Font Panel works. I guess there's a way to get some of those fonts to the iMovie Font Panel, but I can't see how.
Thank you.

I have had good success with the System Font Panel. Now all of a sudden, I only get part of it. Any suggestions on how to restore the entire panel? There are no change size options in the corners like in some dialog boxes. I was going to paste what I have here, but for some reason, paste is not available.

Similar Messages

I don't understand how to use the volume control on the new iphone headphones

I just bought the new style earphones for my iphone and it has a new volume control -- how does it work? On the old one you just pushed up or down for volume control but now it just increases volume for the time you hold it down? Does anyone know how to use this properly?

I have had good success with the System Font Panel. Now all of a sudden, I only get part of it. Any suggestions on how to restore the entire panel? There are no change size options in the corners like in some dialog boxes. I was going to paste what I have here, but for some reason, paste is not available.

Q: I don't understand how to use the teeth whitening tool in PSE 9.

I've been going through the tutorials and following along pretty good but i got to the Perfect Portrait guided edit and didnt' get how to use the Teeth Whitening tool...it seems to select the teeth but then I'm lost....what am I supposed to do at that point after the marching ants are marching around the teeth?

I’m not sure what’s going on, but obviously something is not happening.
You could also try the dodge tool (keep pressing the letter O on your keyboard) until you see the blue dodge tool. No selection necessary.
Enlarge your image to about 200% and use the square bracket keys to increase or decrease the cursor size to fit the area to be whitened. Set exposure in the options bar to about 50%. Gently brush over the teeth area until you get them as you like.

I don't understand how to use the creative cloud, does the cloud app need to be installed?

trying to download creative cloud nothing downloads when trying photoshop getting an error and say retry

Yes, you need to install the Creative Cloud app first. It acts as your central hub for installation, sync and licensing.
Mylenium

Hi fellow apple guys, i have this problem. Hope you can help me. I don't know how to use the function keys (F1 to F12) on my macbook air. Pls help

Hi fellow apple guys, i have this problem. Hope you can help me. I don't know how to use the function keys (F1 to F12) on my macbook air. Pls help

Out of the box, to use the function keys as function keys, hold down the fn key when you press the key. Otherwise, you get the picture function on the key. You can reverse this behavior in the Keyboard system prefs.

Gantt chart: Don't know how to use the tooltipkeys and toolkeylabel

I have a problem. Don't know how to use the tooltipkeys and toolkeylabel. I used jquery to select the gantt bars and on mouse over i was getting the task id "tid" then passing it to adf bean with serverlistener and showing a popup that is adf component with javascript. For positioning of the popup I used a button that has width and height 0 and has position absolute and gets the coordinates of the mouse.
"div[et]" is a jquery selector that selects all the elements that have attribute et. I noticed that all the bars have that attribute as a few other attributes as well "part"...
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
        xmlns:dvt="http://xmlns.oracle.com/dss/adf/faces">
    <af:document title="untitled1.jsf" id="d1">
        <af:resource type="javascript" source="https://ajax.googleapis.com/ajax/libs/jquery/1.7.0/jquery.min.js"/>
        <af:resource type="javascript" source="resources/js/home.js"/>
        <af:messages id="m1"/>
        <af:form id="f1">
           <af:commandButton text="commandButton 1" id="cb1" inlineStyle="visibility:hidden; width:0; height:0" />
            <af:popup id="noteWindow" contentDelivery="lazyUncached" binding="#{homeBean.popup}">
                <af:noteWindow id="popupWindow">
                    <af:panelFormLayout id="pfl2">
                        <af:panelLabelAndMessage label="Task id" id="plam5">
                            <af:outputText value="#{homeBean.taskId1}" id="ot64"/>
                        </af:panelLabelAndMessage>
                        <af:panelLabelAndMessage label="Start Location Name" id="plam6">
                            <af:outputText value="#{homeBean.startLocation}" id="ot7"/>
                        </af:panelLabelAndMessage>
                        <af:panelLabelAndMessage label="Stop Location Name" id="plam7">
                            <af:outputText value="#{homeBean.stopLocation}" id="ot8"/>
                        </af:panelLabelAndMessage>
                        <af:panelLabelAndMessage label="tasktype" id="pla2m7">
                            <af:outputText value="#{homeBean.taskType}" id="ot9"/>
                        </af:panelLabelAndMessage>
                    </af:panelFormLayout>
                </af:noteWindow>
            </af:popup>
            <af:serverListener type="jsServerListener" method="#{homeBean.serverEventHandler}"/>
            <dvt:schedulingGantt id="gantt1" value="#{bindings.PersonView1.schedulingGanttModel}" var="row"
                                 startTime="2011-07-04 00:00:00" endTime="2011-07-04 23:00:00" summary="gsg"
                                 showMenuBar="false" showToolbar="false" iconPlacement="left"
                                 showTasksAsDailyBar="false">
                <f:facet name="major">
                    <dvt:timeAxis scale="days" id="ta1"/>
                </f:facet>
                <f:facet name="minor">
                    <dvt:timeAxis scale="hours" id="ta2"/>
                </f:facet>
                <f:facet name="nodeStamp">
                    <af:column sortProperty="#{bindings.PersonView1.hints.PersonId.name}" sortable="false"
                               headerText="#{bindings.PersonView1.hints.PersonId.label}" id="c1">
                        <af:outputText value="#{row.PersonId}" id="ot1">
                            <af:convertNumber groupingUsed="false"
                                              pattern="#{bindings.PersonView1.hints.PersonId.format}"/>
                        </af:outputText>
                    </af:column>
                </f:facet>
            </dvt:schedulingGantt>
        </af:form>
    </af:document>
</f:view>javascript:
$(document).ready(bindEvents());
function bindEvents() {
    $("div[et]").live('mouseover', function (e) {
         $('#cb1').css("position", 'absolute');
         $('#cb1').css("top", e.pageY-4);
         $('#cb1').css("left", e.pageX);
        var popup = AdfPage.PAGE.findComponentByAbsoluteId("noteWindow");
        var element = AdfPage.PAGE.findComponent("f1");
        var taskIdToPass = null;
        if ($(this).attr("tid") !=undefined) {
             taskIdToPass = $(this).attr('tid').toString();
        } else {
            taskIdToPass = $(this).parent().attr('tid').toString();
        var param = {            taskId : taskIdToPass        };
        AdfCustomEvent.queue(element, "jsServerListener", param, true);
        if (!popup.isPopupVisible()) {
            var hints = {};
            hints[AdfRichPopup.HINT_LAUNCH_ID] = "cb1";
            hints[AdfRichPopup.HINT_ALIGN_ID] = "cb1";
            hints[AdfRichPopup.HINT_ALIGN] = AdfRichPopup.ALIGN_AFTER_START;
            popup.show(hints);
    }).live("mouseout", function () {
        var popup = AdfPage.PAGE.findComponentByAbsoluteId("noteWindow");
        popup.hide();
};My bean that is session bean:
package view;
import oracle.adf.model.BindingContext;
import oracle.adf.model.binding.DCDataControl;
import oracle.adf.view.rich.component.rich.RichPopup;
import oracle.adf.view.rich.render.ClientEvent;
import oracle.jbo.ApplicationModule;
import oracle.jbo.Key;
import oracle.jbo.Row;
import oracle.jbo.RowSetIterator;
import oracle.jbo.ViewObject;
public class HomeBean {
    private RichPopup popup;
    private String taskId1;
    private String startLocation;
    private String stopLocation;
    private long taskId;
    private String taskType;
    public HomeBean() {
        super();
    public void serverEventHandler(ClientEvent clientEvent) {
        String taskIdString = clientEvent.getParameters().get("taskId").toString();
        this.taskId = Long.parseLong(taskIdString);
        DCDataControl dc1 = BindingContext.getCurrent().findDataControl("AppModuleDataControl");
        ApplicationModule am = dc1.getApplicationModule();
        ViewObject vo = am.findViewObject("PdTrfDayView1");
        RowSetIterator rowSetIterator = vo.createRowSetIterator(null);
        Row[] rows = rowSetIterator.findByKey(new Key(new Object[] {taskId}), 1);
        Row row = rows[0];
       this.taskId1 = row.getAttribute("PdTrfDayId").toString();
       this.startLocation = row.getAttribute("StartLocation").toString();
       this.stopLocation = row.getAttribute("StopLocation").toString();
       this.taskType = row.getAttribute ("PdTrfTypeId").toString();
        RichPopup.PopupHints ph = new RichPopup.PopupHints();
        vo.closeRowSetIterator();
    public long getTaskId() {
        return taskId;
    public void setPopup(RichPopup popup) {
        this.popup = popup;
    public RichPopup getPopup() {
        return popup;
    public String getTaskId1() {
        return taskId1;
    public String getStartLocation() {
        return startLocation;
    public String getStopLocation() {
        return stopLocation;
    public String getTaskType() {
        return taskType;
}I am wondering If i can use setCurrentRow on the iterator that i create and use it for displaying on the popup instead of binding startLocation and stopLocation to the bean and if there is any benefit of that at all...
Edited by: 897833 on Nov 24, 2011 11:37 AM

Hi,
To use tooltipkeys and tooltiplabel in gantt, you can add following code in managed bean
public String[] getTooltipKeys()
return new String[]{"columnA", "columnB", "StartDate", "EndDate"};
public String[] getTooltipLabels()
return new String[]{"A", "B", "Start Date", "End Date"};
where , the string array in the ToolTipKeys represents the columns, of the table you have in the gantt component , and the string array in TooltipLabels displays the label you want to display for the table columns.
In the jsff, you could call the bean methods as follows:
tooltipKeys="#{GanttBean.tooltipKeys}"
tooltipKeyLabels="#{GanttBean.tooltipLabels}"

I don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

i don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

Step by step:
1. On your main vi Front Panel, create your boolean indicator.
2. On the block diagram, right click the new boolean indicator and select Create - Reference.
3. On sub-vi front panel, create boolean indicator (or use one that is already created).
4. On sub-vi front panel, create a reference (Controls Palette - Refnum - Control Refnum).
5. Right click on the newly created Refnum and select Select Vi Server Class - Generic - GObject - Control - Boolean. The refnum label changes to BoolRefnum.
6. On sub-vi block diagram, create Property Node (Functions - Application Control - Property Node). Find the BoolRefnum and move it close to the new Property Node.
7. Wire the BoolRefnum to the reference input of the property node.
8.
Right click on the property node and select Change to All Write.
9. Move mouse to point to Visible inside property node box, left click and select Value.
10. Wire the boolean indicator from step 3 to the Value input of the property node.
11. On sub-vi front panel, right click on icon and select Show Connector.
12. Click on empty connector spot then click on the new BoolRefnum. Save your sub-vi.
13. On main vi block diagram, connect refernece created in step 2 to the new connector terminal of sub-vi.
14. Save and run.
Here are the modified vi's.
- tbob
Inventor of the WORM Global
Attachments:
Pass_a_Reference.vi ‏20 KB
GL_Flicker_mod.vi ‏83 KB

How to use the same OC4j server with different port number

How to use the same OC4j server with different port numbers..?
I have to OC4J installed on my machine on different hard disk drives....
I want to be able to run both the server simultaneously..?
is it possible ..it yes then how..?
for that i have changed the port number of one server...
but when i am trying to start the other server with different port number..it says that JVM -Bind already...
Is there any clues...?
Nilesh G

In the config directory:
default-web-site.xml: Change the port the HTTP listener listens on
jms.xml: Change the port the JMS service listens on
rmi.xml: Change the port the ORMI listener listens on.
Or, you can add another web-site.xml file, and deploy your applications to 1 server, and bind the web applications to the different web sites. This way you only have to deploy your applications to 1 place.
Rob
Oracle

How to use the eventing and databag with a WAS 6.20 ?

How to use the eventing and databag with a WAS 6.20 ?
Is what there is a good guide for these services?
Thank's

In the raise event you can pass the value
like below.
<SCRIPT>
function raiseEvt(value1){
if(window.document.domain == window.location.hostname){
if ( document.domain.indexOf(".") > 0 ) document.domain = document.domain.substr(document.domain.indexOf(".")+1);
   EPCMPROXY.raiseEvent( "urn:com.sap:BWEvents","BWiViewevent", value1, null );
// alert('tree domain'+document.domain);
</SCRIPT>
and in the
subscribe event you can get the values like below.
<script language="javascript">
if(window.document.domain == window.location.hostname){
document.domain = document.domain.substring(document.domain.indexOf('.')+1);
    EPCMPROXY.subscribeEvent("urn:com.sap:BWEvents","BWiViewevent", window, "myreceiveEvent");
function myreceiveEvent( eventObj ) {
      document.forms[0].gp_hidden.value = eventObj.dataObject;
</script>
Also look at the following link for a complete documentation.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/Enterprise%20Portal%20Client.pdf
Regards
Raja

Does anyone kwow how to use the Korg M50 editor with garageband?

does anyone kwow how to use the Korg M50 editor with garageband?

Moved from the Creative Cloud to the Photoshop forum. They will be able to help you here.

Don't understand how to do the proxy setting to configured with computer need phone no. for help Please!

try and open a web pg. that friend sent me it keeps coming up on screen in box says, The Proxy server refusing connections Firefox is configured to use a proxy server that is refusing connections , Check t proxy settings to make sure that , they are correct,Check network to see if proxy server is working
okay so how do I fix this cause really don't understand what this means , Help! to fix as I am missing a lot of information I would like to read .KMH

You can find the connection settings in Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
See "Firefox connection settings":
* https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can

How to use the d3.js library with Apex Charting

Hello.
I am using Apex 4.1.0 with Oracle 11gR2 and Oracle App Server (mod_plsql).
I'm trying to incorporate the d3.js library (a visulaization framework) in my Apex charts but am not having much success.
I found this article in which David Mann uses the library within an Apex 4.x application:
http://ba6.us/d3js_application_express_basic_dynamic_action
I replicated his exact steps in my own application but without success. I do not see how he was able to get his application to work. Indeed, the tutorial does not even use a dynamic action despite what the article title says.
Has any one used the d3.js library with their Apex application. If so, would you be willing to share how you went about it?
Thank you very much.
Elie

EEG wrote:
Hello fac586.
Thank you very much for responding/helping.
In the article I referenced I did note David's statement about using a "modern" browser with d3.js (one that recognizes css3 syntax); otherwise, the framework will not respond. And so, I was careful to run my Apex application in IE9.x as well in Firefox 16.x. But all I see is an empty region with a title. No chart. Nothing.
I suspect my one of my problems here is in getting the chart to refresh every "n" seconds. For this, I think the dynamic action would be used, though I'm not sure how to go about doing so.That's included in the sample code (line 99). Strangely Dynamic Actions don't seem to include a native timer event...however there is a plug-in.
More problematic, though, is that I am not seeing any chart whatsoever in the region. I would have expected to see some chart data, even if it is not automagically refreshing.
I've created my example in my EEG workspace on apex.oracle.com:
Workspace: EEG
Username: [email protected]
Password: galaxy (note: all lowercase)
Please see application 27083 called Elie_Goodies, page 25. This page has an associated tab called, appropriately enough, "d3.js Library". The Safari console showed a couple of JavaScript errors.
1. The URL used to include the d3 code in the blog article:
<script type="text/javascript" src="http://mbostock.github.com/d3/d3.js"></script>is returning HTML, not JavaScript. Changing it to that given on the d3js.org site:
<script src="http://d3js.org/d3.v2.js"></script>includes the correct script.
2. There was a syntax error in a script in the Run Code region. I think there was some kind of issue arising from copying from the blog article: it looked like line endings hadn't been respected as the code wasn't formatted properly. Pasting it from the blog into Coda's editor and then into the APEX Region Source text area fixed the format, and it then ran first time.
Thanks for the heads-up. I'll also be looking further into d3.

HT1688 I am trying to find answers about how to use the earphones that came with my new iPhone 4s. Does this work similarly as a Bluetooth or do I need to still buy one. The printing in the manual is SOOO small, it is too hard to read!

Does anyone know how to use the earphones( plugs) that come with iPhones?
Mine is still fairly new and I am just learning how to use certain things.

They're pretty straightforward. You plug them into the headset jack (the hole on the top left of your phone). You put the buds in your ears. All sounds, except for the phone ringing will now come through the earbuds.

I get a message Debug Error:[Exception... "Node was not found" code: "8" nsresult: "0x80530008 (NS_ERROR_DOM_NOT_FOUND_ERR)" location: "chrome://ffebayhot/content/lib/Extension.debug.js Line: 366"] using Vista. I don't understand how to delete the "ebay

Every time I try to use google for a search, I get the following error msg. Debug Error:[Exception... "Node was not found" code: "8" nsresult: "0x80530008 (NS_ERROR_DOM_NOT_FOUND_ERR)" location: "chrome://ffebayhot/content/lib/Extension.debug.js Line: 366"]. I saw the solution provided for MS XP, but not for Vista. Also, while I saw the solution, I need more explicit instructions on how to "delete the ebay extension".
== This happened ==
Every time Firefox opened
== When I try to load google from Firefox, I get the error message, Debug Error:[Exception... "Node was not found" code: "8" nsresult: "0x80530008 (NS_ERROR_DOM_NOT_FOUND_ERR)" location: "chrome://ffebayhot/content/lib/Extension.debug.js Line: 366"]

Tools->Add-ons->Extensions
At the top of the Firefox window, click on the Tools menu and select Add-ons. The Add-ons window will appear.
In the Add-ons window, select the Extensions panel.
Select the add-on you wish to uninstall.
Click the Uninstall button. When prompted, click Uninstall to confirm.
Then restart Firefox.
Read here:
[[Uninstalling add-ons|#How to uninstall extensions and themes|Uninstalling extensions]]

I don't know how to use the property node to get information out of my sub vi while it is working.

I had a question answered earlier about passing information out of a sub vi, and was helped out. The problem is that I don't understand what is happening as I can not reproduce the results. I am now trying to take results of a comparison (true-false) and pass that back out of my sub vi. I tried a property node and to connect a refnum control to it in the sub vi. Then I tried to connect an indicator to its terminal in the main vi, but was unsuccessful can someone tell me how and why, step by step, to pass this information out. Starting with the point of information in the sub vi to the indicator in the vi. I would appreciate any help that you could give m
e.
Attachments:
Pass_a_Reference.vi ‏15 KB
GL_Flicker_mod.vi ‏77 KB

Step by step:
1. On your main vi Front Panel, create your boolean indicator.
2. On the block diagram, right click the new boolean indicator and select Create - Reference.
3. On sub-vi front panel, create boolean indicator (or use one that is already created).
4. On sub-vi front panel, create a reference (Controls Palette - Refnum - Control Refnum).
5. Right click on the newly created Refnum and select Select Vi Server Class - Generic - GObject - Control - Boolean. The refnum label changes to BoolRefnum.
6. On sub-vi block diagram, create Property Node (Functions - Application Control - Property Node). Find the BoolRefnum and move it close to the new Property Node.
7. Wire the BoolRefnum to the reference input of the property node.
8.
Right click on the property node and select Change to All Write.
9. Move mouse to point to Visible inside property node box, left click and select Value.
10. Wire the boolean indicator from step 3 to the Value input of the property node.
11. On sub-vi front panel, right click on icon and select Show Connector.
12. Click on empty connector spot then click on the new BoolRefnum. Save your sub-vi.
13. On main vi block diagram, connect refernece created in step 2 to the new connector terminal of sub-vi.
14. Save and run.
Here are the modified vi's.
- tbob
Inventor of the WORM Global
Attachments:
Pass_a_Reference.vi ‏20 KB
GL_Flicker_mod.vi ‏83 KB

I don't understand how to use the System Font Panel with iMovie.

Similar Messages

Maybe you are looking for