I don't understand Muse page layout

Hi all,
In my Muse design, I have a colored header which is continuously at the perfect width of my page (also when I preview in my browser)
When I insert a small picture underneath this header and place them at the exact same position (at top and left) as my colored header, the picture seems to start at another position from the left, when I preview the page.

Hi,
On your coloured header do you have full browser width button enabled?
This would cause it to stretch the width of the screen and therefore appear to be in a different position than your picture when you are viewing in preview.

Similar Messages

Problem with custom page layout

Hi,
I had created a page layout and deployed it.
And created a layout for it in the Portal content.
When i am trying to create page i can't able to see my page layout.
Here i can only see the default layouts.
What should be done to make my page layout visible in the page creation wizard.
Thanks in advance,
Mr.Chowdary

Hi,
have you set your PCD-Layout's wthin the PCD to be a Template?
(Category Info, Object is a Template = Yes)
Hope it helps ...
Frank

How do I make categories under My Templates, as is done in page layout and word-processing?

How do I make categories under My Templates, as is done in page layout and word-processing? I have over 50 of my own templates and want to categorize them. For example: son's homework, business, etc. Thanks

Here are some screenshots of my organization. Your sub-folders need to be in the same folder as My Templates, NOT in My Templates which is confusing.

Working in muse when I go to right click I don't get the Page Properties menu how do I change ?

Working in muse when I go to right click I don't get the Page Properties menu how do I change this ?

Hello,
What do you right click on? Usually you should be able to see Page Properties when you right click on a page from the plan mode, or you can also find page properties if you open the individual pages and then go to Page -> Page Properties. However, if you are in the plan mode and you try to use the Page -> Page Properties, that won't work and the "Page Properties" option would be grayed out.
Hope this helps.
Cheers
Parikshit

I don't understand why I can't download for free the apps designed by Apple, such as Pages and Numbers, which are free with iOS 7. Can anyone help me?

I don't understand why I can't download for free the apps designed by Apple, such as Pages and Numbers, which are free with iOS 7. Can anyone help me?

The apps are free with iOS 7 if you purchased a new device after September 2013. The apps do not come free just because you are running iOS 7 now. Did you purchase or receive a new iPad recently?
If you did, are you using the same Apple ID to get the apps that you used to activate the iPad? If you are, sign out of your ID, restart your iPad, sign in again and go back to the App Syore and see if the apps show up as free.
Settings>iTunes & App Store>tap your ID and sign out. Restart the iPad and go back to the settings and sign in again.

I don't understand why recently with the new "pages" my computer stops responding. When I go to fix some grammar all of a sudden the little colored circle begins to appear and won't go away I restart my computer.

I don't understand why recently with the new "pages" my computer stops responding. When I go to fix some grammar all of a sudden the little colored circle begins to appear and won't go away I restart my computer.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report — it will be very long and not helpful.

I don't understand apple computers.... I am writing a formal piece and then when I save it I don't notice and one page is fully deleted. It's already saved. Is there any way I can get it back what was deleted??

I don't understand apple computer. I am writing a formal piece for english and one page of it gets deleted without me knowing. I save this file. Is there any way I can get it back?

Are you running Mountain Lion (Mac OSX 10.8.x)? If so, and you are using Pages, you should be aware that Apple has implemented a new auto-save feature for its software (and other software that has been written to comply). The very good news is that you can retrieve prior states of your document. The bad news is that the feature makes it easy to modify your work inadvertently by saving your changes without your knowledge. I don't think Apple has it quite right yet. In any event, research OS 10.8 auto-save and see if this might be your problem.

Muse Pages don't resize to text content

Hi, I'm new to Muse and am stuck on the following:
Muse Pages don't resize to text content
This is a link to the site page in question: ABOUT | Total Clothing Solutions
The shopping basket widget does not affect the page, it does the same without it.
many thanks in advance
Kind Regards Gem

Hmm... I think we'll need a screenshot or a bit more explanation in order to help. Here's what that webpage looks like for me. Without knowing more of what's it's supposed to look like, it's difficult to know what's not working as you're expecting? Thanks.
If you're using Object > Insert HTML, you need to size the HTML object to the height the HTML will be in the browser. The output generated by Muse will attempt to maintain the distance from the bottom of the HTML object to the top of the first object that's lower down on the page after the HTML expands to it's full size in the browser. Therefore if you don't resize the HTML object to its expected final height, or larger, in Muse Design view, there will be a large gap below it in the browser. It sounds like that may be what you are/were seeing? Even though I don't see that on this page.

Can anyone help me change fonts and size on my page? I don't understand the class questions?

Can anyone help me change fonts and size on my page? I don't understand the class questions? All I want to do is change the font and size of a table or div.
http://www.allgearinc.com/AG12SSWL-Swift.htm -One problem page

If you want to change the fonts of the entire page then this code will do the trick:
body {
    font-size: 16pt;
    color: silver;
     font-family: whatever, goes, here;
If you want to change the fonts of ALL tables on a page then the code is something like this:
table {
    font-size: 20pt;
    font-family: "Courier New", Courier, monospace;
    font-style: italic;
    font-weight: bold;
what exactly do you want to change? Can you be a bit specific so that Ben or Ken can give you the exact code and tell you about the short-hand method to write the code in one line.
Have you bought a book on CSS yet? If not, it is a good idea to get one as a reference. Eric Meyer writes good books on CSS.

Writers - please help with page layout and headers/footers in Pages

Hello
Apologies if this is a stupid question, but I have fiddled around with my page layout and can't figure this out for myself!
When I type a manuscript, I like to have a header and footer giving the book title, chapter, my name, etc. I'm finding that the header and footer is set to a wider range than I have set the main body of the page. Would you leave it that way, so that it is easily differentiated from the actual text, or would you align the left and right margins on the header and footer to match the body of the text? And if so, how do you do this please?
Secondly, I can't figure out how to increase the top and bottom gap so that there is a good space between the header and the first line of text.
Any advice would be gratefully received!
Thank you!

rainbow-warrior wrote:
When I type a manuscript, I like to have a header and footer giving the book title, chapter, my name, etc. I'm finding that the header and footer is set to a wider range than I have set the main body of the page. Would you leave it that way, so that it is easily differentiated from the actual text, or would you align the left and right margins on the header and footer to match the body of the text? And if so, how do you do this please?
I don't understand what you did.
When we use the normal tools:
Inspector > Document > Margins, the widths of header, body and footer are the same.
Secondly, I can't figure out how to increase the top and bottom gap so that there is a good space between the header and the first line of text.
With the already named tools, we may adjust top & bottom margins with no change on the header & footer.
As I often wrote, looking in the PDF User Guide which is delivered with every copy of iWork is an efficient way to spare time.
Yvan KOENIG (from FRANCE mardi 7 octobre 2008 14:08:55)

Switching between page layout and word processing

I can't seem to switch between page layout and word processing view. I've read all the posts on this and still can't figure out why I can't just type a document into Pages. The only option I have in page layout view is to type into text boxes, which is not what I want. I just want to type a letter for crying out loud.
Before I get all the rants about reading User Guides, etc. *I have*. I've also searched on here and in-app help and just don't understand the fuzzy/non-existant answers. Obviously, I'm a newbie, so please don't jump all over me for this. If it was Word - I could do this in NO time. I just find it incredibly frustrating that inputting a normal document should be so difficult.
Is "Pages" *not* a word processing program? Is it just a cut and paste application? Sorry for the tone - I mean no disrespect - it's just that I've been fooling around with this for DAYS and I just don't have time to spare anymore. I really need to get this done.
Can somebody give me a straightforward answer on how to just type a normal document into pages without using text boxes?
Thanks and I apologize for not being mac-savvy. It took some of us a lot longer to see the light =)

Here is a script doing the conversion task for you.
Open a Page Layout document
run this script:
--{code}
set p2t to (path to temporary items from user domain) as text
set path_2_doc to p2t & (do shell script "date +_%Y%m%d_%H%M%S.doc")
tell application "Pages"
save document 1 in path_2_doc
open file path_2_doc
end tell
--{code}
that's all folks.
Yvan KOENIG (VALLAURIS, France) lundi 20 juin 2011 18:03:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How to create a new aspx page in Pages library using Elements.xml without including any aspx page layout in my feature?

Is it possible to have the elements.xml file create a page in the Pages (or SitePages) library without actually including any sort of page layout or aspx artifact in the feature?
I see no reason to add a mywebpartlayout.aspx to my feature just so I can deploy a Home.aspx based on the BlankWebPart.aspx page layout.
I'm sure there is something obvious I am missing with regards to the Elements schema (which is why I've almost given up on using it completely and just gone to pure C#) but
I would really like to do this kind of simple stuff with declarations if at all possible. Must less code to write, debug, test and maintain.

I don't see how my question keeps getting misunderstood. This seems to be very clear and clearly not answered: "Is it possible to have the Elements.xml file
create a page in the Pages (or SitePages) library without actually including any sort of page layout or aspx artifact in the feature?"
I can't be more clear than "without including ANY sort of page layout or aspx artifact (meaning anything ending in aspx) IN THE FEATURE". I am not capitalizing to yell,
only to emphasize. Your disagreement is based on a link that shows ADDING AN ARTIFACT (the dummy MyPage.aspx) to a feature. I am asking if it
is possible (again, I cannot be more clear) to just use an Elements.xml file to instruct SharePoint to make a new item in a Pages or SitePages library.
Your definition of page includes Page Layouts and what you call Web Part Pages (again, a type of page layout + data in a site pages list that says what webparts
to display). Page Layouts are clearly NOT items stored inside of a SitePages or Publishing Pages library. Those libraries are just lists whose records
define the parts to show inside a specific layout.
When I refer to a Page I mean an entry into a pages (site pages/publishing pages) list. If I wanted to deploy a page layout then, quite obviously, I would need
to include it into my solution. I think maybe you are assuming that I do not know the difference. I do. The question is, can an Elements file alone be enough to instruct SharePoint to make a new entry into a Pages or SitePages library.
Now, your second link does show how to reference an existing Page Layout. Thank you for that. It is excellent. But this still leaves the problem of having to
add some sort of aspx page into the solution. Let me try to explain why I feel this SHOULD BE unnecessary: The aspx file will not have anything on it if I am referring to the ~sitecollections/.../BlankWebPartPage.aspx layout.
All web parts and content that should appear on the new page can be described IN the Elements.xml file. Any sort of aspx file is unnecessary, it seems to me.
So, if I am referencing a ~sitecollections/.../BlankWebPartPage.aspx page layout and specifying the web parts to add to the page, why should there be a
requirement to have some aspx file within the feature? That's what I am trying to figure out.
I am not asking for source code as proof. I am asking for an Elements file that does NOT reference anything AT ALL inside the Visual Studio solution for reasons I just described.
If you do not know how to do it then perhaps it cannot be done but I would like the question to stay unanswered for a little while until someone can demonstrate either a) it CAN
be done or b) a link to some Microsoft document stating that it is MANDATORY to have a physical element within the feature that gets copied to the environment.
I think it is important to understand what is being asked before insisting you have answered. It is clear from your posts that you have not fully understood the question yet but
I am hoping this posts makes it clear. I really appreciate you taking the time to respond, though. You seem to be the only one up for the challenge! :)

Special characters (norwegian wovels) not showing correctly in Page Layouts

We have a publishing site which surfaces content from several catalogs in an authoring site in a cross site collection publishing environment.
We have a problem with labels for Catalog-Item Reuse Snippets containing norwegian vowels/special characters not showing properly. An example of a snippet is shown below. This contains the character ø (oslash).
<div class="rightColPaddingUnder"><h2>Leverandørkontakt</h2>







</div>
The frontend messes the character up and displays this as strange A
We have tried several things in order to fix this but are running out of leads:
tried to change encoding in the page layout html file from utf-8 to iso-8859-1
tried to replace ø with the hex value (ø) and the old school & + oslash + ; way of encoding characters
Regional settings on the server is verified to be norwegian
The strange part is that actual content in the content type columns that we display around the page actually shows the norwegian characters correctly

Excellent, thanks!. I checked the top level globalization setting i IIS and this was set to Windows-1252.
However, our work around solution was to add the
<meta charset="utf-8">
declaration inside the first MS-statement inside the body tag of the page layout HTML file like this:
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE html[]>
<html class="no-js" lang="en" xmlns:mso="urn:schemas-microsoft-com:office:office" xmlns:msdt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882">
<head>
<title>Some title
</title>
</head>
<body>

<meta charset="utf-8">

Strange, but it worked.
Actually we tried to set the globalization settings in the web.config files of the different IIS sites running in the webapp yesterday like this:
<add name="SPWindowsClaimsAuthentication" type="Microsoft.SharePoint.IdentityModel.SPWindowsClaimsAuthenticationHttpModule, Microsoft.SharePoint.IdentityModel, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
</httpModules>
<globalization requestEncoding="utf-8" responseEncoding="utf-8" culture="nb-NO" fileEncoding="utf-8"/>

<compilation batch="false" debug="false">
As far as I can understand this should have the same effect as setting this in IIS.
It seems that the IIS setting actually overrides whatever you put in web.config for globalization options.
We have updated the IIS setting now to UTF-8 and done a IIS Reset. At the moment we get corrupted characters still, but now the existing aspx-files probably is corrupted and needs to be replaced with fresh ones. I will do a catalog dis-/reconnect.
I'll update with whatever we end up with as the final solution. Anyway, very grateful for the invaluable help from a fellow Scandinavian :-)

Page layout missing!

I moved up from Dreamwaever 4 to thr Trial version of DW8.
Was doing well, until the the 'page layout' stopped
displaying.
My pages are : Head PHP, Left HTM. Right Htm and center panel
where I do al the work (Journal stuff)
But now Upon clicking "Files" all I get is the Head PHP,
whilst the page layout does not load.
Any help would be greatly appreciated:
Thks.

I don't understand your details or your question. Can you try
again,
please?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"blondey50" <[email protected]> wrote in
message
news:egqbf5$ff4$[email protected]..
>I moved up from Dreamwaever 4 to thr Trial version of
DW8.
> Was doing well, until the the 'page layout' stopped
displaying.
> My pages are : Head PHP, Left HTM. Right Htm and center
panel where I do
> al
> the work (Journal stuff)
>
> But now Upon clicking "Files" all I get is the Head PHP,
whilst the page
> layout does not load.
> Any help would be greatly appreciated:
> Thks.
>

Different display page layout in Display Layout mode and in Preview mode

Hi everyone,
can anybody help me to understand why it is different display page layout in
Display Layout mode:
I have 2 collumns
and in Preview mode:
I have only one column
is there some option that I didn"t check in layout page properties?

The only thing you can try, is to have a defined number of lines, where the last line only consists of a few words. That may(!) give enough room for different browser rendering. But there is definitely no guarantee.
You may as well force the text frame to be converted to an image (Place one single character – point, space – out of a system font. This will force Muse to convert the text into an image – thus preventing txt reflow)

I don't understand Muse page layout

Similar Messages

Maybe you are looking for