I don't understand the thing you call live bookmarks never used it, and most forums I have used notify VIA E-mail not giving out my E-mail address information when a reply has been made to the thread in question.

So how do I get notified of updates in this forum? As I said: I don't understand the thing you call LIVE BOOKMARKS I have never used them, and most forums I have used notify VIA E-mail not giving out my E-mail address, or other private information when a reply has been made to the thread in question, so how do I get notified of updates in this forum? I have seen no normal options for setting my viewing preferences used for this forum. Thank You.

Thanks for your reply via email/msg. He wrote:
If you are interested in the actual design data for the Xeon processor, go to the Intel site and the actual CPU part numbers are:
Xeon 4 core - E5.1620v2
Xeon 6 core - E5.1650v2
Xeon 8 core - E5.1680v2
Xeon 12 core - E5.2697v2
I read that the CPU is easy to swap out but am sure something goes wrong at a certain point - even if solderedon they make material to absorb the solder, making your work area VERY clean.
My Question now is this, get an 8 core, then replace with 2 3.7 QUAD CHIPS, what would happen?
I also noticed that the 8 core Mac Pro is 3.0 when in fact they do have a 3.4 8 core chip, so 2 =16? Or if correct, wouldn't you be able to replace a QUAD CHIP WITH THAT? I;M SURE THEY ARE UO TO SOMETHING AS 1) WE HAVE SEEN NO AUDIO FPU OR PERHAPS I SHOULD CHECK OUT PC MAKERS WINDOWS machines for Sisoft Sandra "B-E-N-C-H-M-A-R-K-S" -
SOMETHINGS UP AND AM SURE WE'LL ALL BE PLEASED, AS the mac pro was announced Last year, barely made the December mark, then pushed to January, then February and now April.
Would rather wait and have it done correct than released to early only to have it benchmarked in audio and found to be slower in a few areas- - - the logical part of my brain is wondering what else I would have to swap out as I am sure it would run, and fine for a while, then, poof....
PEACE===AM SURE APPLE WILL BLOW US AWAY - they have to figure out how to increase the power for 150 watts or make the GPU work which in regard to FPU, I thought was NVIDIA?

Similar Messages

How to stop Facebook from e-mailing me that a FB post has been made

I don't want e-mails from FB saying that a post has been made. I will go to FB directly to keep current. Do I change settings on Mozilla and if so, how? Or, do I make some kind of change in FB? If so, how?

Change your settings on Facebook. Thunderbird receives email sent to you. It cannot control what is sent.

How can I see when a transport has been made in an other environement?

Hi,
Is there anywhere in SAP where you can see if a transport as been made in an other environement? I'm trying to figure out if a transport in the DVL environement has been made in the SANDBOX environement. I tried SE10 transaction, but it seems that once the transport has been made in an other environement, it doesn't appear in this transaction anymore.
Thanks, points will be given if helpful.

Hi,
Thanks for the transaction code, but my question is not answered yet.
For example, I use STMS_IMPORT in the Development environement to see the list of the transport that has been made in that environement.
I now have a list of these transports, with a status. But I wanna know if that transport that has been created in the Development environement has been moved to the Sandbox environement.
STMS_IMPORT shows me only the list of transports that has been created in that environement. It doesn't tell me if a transport in DVL has been moved in the QAS, SANDBOX or PRODUCTION environment.
Thanks again,
Julien

My apple ID is disabled. Its not giving me a reason why, just says "YOUR APPLE ID HAS BEEN DISABLED" I am able to access my account information on iTunes, but I cannot purchase anything from iTunes, or UPDATE my apps. HELP!!

I really need some help here. I would like to say the APPLE staff has been helpful for me, but I am very disappointed in the "service" I have received. I have tried to reset my password, I have taken my phone to APPLE, they were rude and were no help, at all. I have always been very satisfied with my iPhone and iPad, but I am sad to say I am frustrated and discouraged.
I am unable to purchase music or apps, and whats more frustrating is the fact that I cannot even update the applications I currently have.

I've tried that too. Everything I am being told to do isn't working.

How to run Depreciation in SAP system when manual posting has been made

Hi
My client is posting the dep thro' manual entry every quater from 2003 FY onwards.But untill 2002 they were posting the dep in SAP,due to some issue they started to post the dep manually and now they want to run the dep in SAP system.
I am new to AA and i am confused and don't know how to proceed further.
If i run the dep from 2003 period 1,then what will be impact of the same and the FI books has beem closed but the AA year is still open.
I though of going like....
I will retire all the asset as on 31.03.02 without revenue and purchase the same assets in the current fiscal year (2007) as a in house manufacturing with the current book value.
I don't whether i am correct or wrong, if i am correct/wrong kindly guide me and the area or implication that i have to take care while performing the above activity... or any other way/suggestion thro' which i can bring the dep in the system thro' standard way...
We are in 4.6c version.
regards
Praveen

hi Praveen,
my advice was to reverse the newly created depreciation posting, not the ones which were created throughout the years periodically.
if you run the depreciation now and post all values to today, than you have to do the reverse posting today. They should be exactly the same day! If you do the depreciation post for a day in the past, that means (at least for me), that you are allowed to post to that day (both legally and 'SAPally' , and in this case you have create (and you should be able to do so) the reverse posting for that day.
Come back if you need more clarifications
ec

Which Mac Pro? More cores=slower speeds? And most of us know the speed matters or FPU for music and I don't understand the faster is for the least amount of procs. And while I get the whole rendering thing and why it makes sense.

Which Mac Pro? More cores=slower speeds? And most of us know the speed matters or FPU for music and I don't understand the faster is for the least amount of procs. And while I get the whole rendering thing and why it makes sense.
The above is what the bar says. It's been a while and wondered, maybe Apple changed the format for forums. Then got this nice big blank canvas to air my concerns. Went to school for Computer Science, BSEE, even worked at Analog Devices in Newton Massachusetts, where they make something for apple.
The bottom line is fast CPU = more FPU = more headroom and still can't figure out why the more cores= the slower it gets unless it's to get us in to a 6 core then come out with faster cores down the road or a newer Mac that uses the GPU. Also. Few. I'm the guy who said a few years ago Mac has an FCP that looks like iMovie on Steroids. Having said that I called the campus one day to ask them something and while I used to work for Apple, I think she thought I still did as she asked me, "HOW ARE THE 32 CORES/1DYE COMING ALONG? Not wanting to embarrass her I said fine, fine and then hung up. Makes the most sense as I never quite got the 2,6,12 cores when for years everything from memory to CPU's have been, in sets of 2 to the 2nd power. 2,4,8,16,32,64,120,256,512, 1024, 2048,4196,8192, 72,768. Wow. W-O-W and will be using whatever I get with Apollo Quad.
Peace to all and hope someone can point us in THE RIGHT DIRECTION. THANK YOU

Thanks for your reply via email/msg. He wrote:
If you are interested in the actual design data for the Xeon processor, go to the Intel site and the actual CPU part numbers are:
Xeon 4 core - E5.1620v2
Xeon 6 core - E5.1650v2
Xeon 8 core - E5.1680v2
Xeon 12 core - E5.2697v2
I read that the CPU is easy to swap out but am sure something goes wrong at a certain point - even if solderedon they make material to absorb the solder, making your work area VERY clean.
My Question now is this, get an 8 core, then replace with 2 3.7 QUAD CHIPS, what would happen?
I also noticed that the 8 core Mac Pro is 3.0 when in fact they do have a 3.4 8 core chip, so 2 =16? Or if correct, wouldn't you be able to replace a QUAD CHIP WITH THAT? I;M SURE THEY ARE UO TO SOMETHING AS 1) WE HAVE SEEN NO AUDIO FPU OR PERHAPS I SHOULD CHECK OUT PC MAKERS WINDOWS machines for Sisoft Sandra "B-E-N-C-H-M-A-R-K-S" -
SOMETHINGS UP AND AM SURE WE'LL ALL BE PLEASED, AS the mac pro was announced Last year, barely made the December mark, then pushed to January, then February and now April.
Would rather wait and have it done correct than released to early only to have it benchmarked in audio and found to be slower in a few areas- - - the logical part of my brain is wondering what else I would have to swap out as I am sure it would run, and fine for a while, then, poof....
PEACE===AM SURE APPLE WILL BLOW US AWAY - they have to figure out how to increase the power for 150 watts or make the GPU work which in regard to FPU, I thought was NVIDIA?

HT5463 Don't understand the Silence section in Do Not Disturb. I do NOT want to silence calls at any time. How do I achieve this?

Don't understand the Silence section in Do Not Disturb. I do NOT want to silence the phone at all. I have entered Allow Calls from 'Everyone".

If you do not want to silence the phone at all, you just need to set both Manual and Sheduled to off (not green). Those two switches turn Do Not Disturb on and off. The "Silence" section is only relevant when Do Not Disturb is On and determines whether it is active only while the screen is locked and Do Not Disturb is On or at all times that Do Not Disturb is On. Also, if Do Not Disturb is Off, it doesn't matter what the "Allow calls from" is set to.
If Do Not Disturb is On you will see a moon icon on the right side of the status bar (somewhere left of the battery %). More information at: http://support.apple.com/kb/HT5463

Java tutorial - helps, problem is i don't understand the API

I don't understand the JAVA Tutorials or the API

Take two steps back.
Buy a book on basic Java Programming. You need to understand the concepts behind programming before you should start reading the API.
But kudos for at least trying to read the API.
Now look at the column on the left, and follow the link called [url http://developer.java.sun.com/developer/onlineTraining/] Tutorials
and then the link titled [url http://java.sun.com/docs/books/tutorial/index.html]The Java Tutorial (Java Series).
And finally read through the sections starting with [url http://java.sun.com/docs/books/tutorial/getStarted/cupojava/index.html]Your First Cup of Java.
Then once you have been through all of that, come back and ask for clarification
on any specific points that you have trouble understanding.
Finally (Because the Finally always gets executed) Try taking a class in java programming.
regards

Don't understand: "the file [eg] 'Stained Glass l jpg' is offline..."

Hi there,
New to Lightroom 2; making some progress. I thought that I imported 800 images from either Elements 7 (that I have and want to use as Editor), or my hard drive--but I think there is something amiss. After I surveyed about a hundred images I came across a batch of about 60 pictures that I took of the new Opus Dei complex in NYC last November.
Well, after the 1st. image of the Opus Dei batch was labeled (right word?) "The file named 'Stained Glass L JPG' is offline or missing " I said, Shucks! and went to the next photo of the batch--then I realized that all of the images are inaccessible in Lightroom.
I must have botched the Import procedure, but I cannot figure out why lots of images are accessible--a lot of them are not.
Thank you.
Bill P

Bill- If you go to grid view in Library, you can see easily what photos are offline or missing. Missing in this context means LR cannot locate the file. This happens when a folder has been moved or renamed outside of LR, i.e., in the Finder or Explorer.
The first thing to try is to locate physically the image file, then direct LR to it. It most likely is on the disk where it started.

TS1646 I need to delete either my Itunes account or delete the credit card information because my account has been hacked.

I need to delete either my Itunes account or delete the credit card information because my account has been hacked.

You can't delete an account, and all of the account's downloads will remain tied to the account.
On your computer's iTunes you should be able to edit your payment info by going into the Store > View Account menu option and logging into your account, and on your account's details page there should be a payment link. If you are doing it on your phone then tap on your id in Settings > iTunes & App Store and tap on 'View Apple ID' on the popup and log into your account - that should also give you a payments link on your account's page.
Changing payment info : http://support.apple.com/kb/HT1918
If you haven't already done so then you may want to contact iTunes Support to let them know : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

My e-mail has changed, but I purchashed some songs in iTunes using my old e-mail address as my account name... so when I try to play the sonngs I bought and paid for - it keeps asking me to authorize my PC first, but I don't remember the password!

My e-mail has changed, but I purchashed some songs in iTunes using my old e-mail address as my account name... so when I try to play the sonngs I bought and paid for - it keeps asking me to authorize my PC first, but I don't remember the password! And since the old e-mail address is no longer active, I can't even chenge the password- becasue it's sends the link to do so via e-mail! Even when I use the "ask personal questions" option to verify and it asks me for my date of birth, I put it in and it still won't acccept.

Hello there, loupar.
The following Knowledge Base article offers up just how to change your Apple ID for the App Store on your iOS device:
iOS: Sign in with a different Apple ID in the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht1311
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

The hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

the hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

it might be a malfunction in your device. you might ave to send it to repairation
1.ave you try resetting it or restoring it?
2. did your hold boutons whas working beffor?

Is it possible to know the date & time, when a form has been last accessed?

Hi
I am using forms 6i. Is it possible to know when a form has been last accessed by any user?
Regards

Only if you implement such a feature. (Maybe writing to a table in the PRE-FORM-trigger in an autonomous transaction)

TS1347 My Outlook Contacts/calendars (running on an iMac) never sync properly with my iPhone, and now on the last sync 90% of the contact information on my iPhone has been deleted. Any ideas?

My Outlook Contacts/calendars (running on an iMac) never sync properly with my iPhone, and now on the last sync 90% of the contact information on my iPhone has been deleted. Any ideas?

Are these the instructions you followed:
http://support.apple.com/kb/ht1670

I am using a WD My Passport Studio external hard drive as a Time Machine. I get the error that a back up folder could not be created when my iMac has been asleep, any advice.

I am using a WD My Passport Studio external hard drive as a Time Machine. I get the error that a back up folder could not be created when my iMac has been asleep, any advice. The hard drive is set set not to go to sleep.

Were you not plugged in via USB to begin with?
I would recommend performing some resets just to be on the safe side. Unplug the external HD, and try these steps:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/HT1379

I don't understand the thing you call live bookmarks never used it, and most forums I have used notify VIA E-mail not giving out my E-mail address information when a reply has been made to the thread in question.

Similar Messages

Maybe you are looking for