I don't want it to autoformat the time in a table - anyone know what to do?
I'm working on a table, and if I type in "8:00" it changes it to "10/22/2008 8:00:00 AM". Does anyone know what I have to do to stop it from doing this?
Thanks,
Justin
Don't forget that the Help available in the program is also for you
searching with the clumsy keystring 'time format' returns:
+*Using the Date and Time Format*+
+Use the date and time format to display date and/or time values.+
+To define a date and time format for one or more cells:+
+Select the cell or cells.+
+Click Inspector in the toolbar, click the Table Inspector button, and then click Format.+
+Choose Date & Time from the Cell Format pop-up menu.+
+To specify how you want a date formatted, choose a format from the Date pop-up menu.+
+To specify how you want a time value formatted, choose a format from the Time pop-up menu.+
Remember, there is no time object in iWork's components. Just date-time ones.
When we enter only the time part, the program always complete it with the current date.
Yvan KOENIG (from FRANCE jeudi 23 octobre 2008 13:12:14)
Similar Messages
-
i have a g4 running os10.4.11, i bought a epson workforce 1100 and tried to set it up but there is not a listing for it when i try to add it before installing the driver software from the supplied cd...anyone know what i can do to get it set up?
Load the drivers and you should then be able to add it in Print Center.
-
I am trying to use Time Machine to back-up to an external hard drive and I get the following message.Unable to complete backup. An error occurred while creating the backup folder. Does anyone know what I should do?
Hello Drake, I suspect one or more of the Drives needs repairing, but...
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imaging something not being covered there. -
After updating to OS X Mountain Lion, there is a password locked pdf document in the Downloads Stack. Does anyone know what password is required to access this file?
Hello, if your install disk is locked (I assume with FileVault) there is no way to change the password. If it weren't locked there were at least two solutions. As far as I know, the only solutions now are:
- contact your dad
- erase and reinstall the OS X clean
Let us know. -
Iphone6 doesn't play music (have tried obvious things like volume etc and plugged in headphones, connected to a speaker via bluetooth, and tried to play from the inbuilt speaker). Does anyone know what the problem is and how it can be resolved?
You can't buy the part from Creative as a spare.
I'm not sure how compatible other parts might be, but that would be a question for someone who really knows a lot about this area of electronics.
The Creative repair for this is likely to be expensi've, but the problem is most likely a broken solder connection than an actual new headphone socket. So if you know someone experienced in surface mount soldering you could probably get it repaired just with this. -
My 2nd generation Nano indicates that about half the space is 'other'. Anyone know what that means and how I get rid of it? All I've ever downloaded is music.
gomeznoles wrote:
My 2nd generation Nano indicates that about half the space is 'other'. Anyone know what that means and how I get rid of it? All I've ever downloaded is music.
The Other data on your iPod is album art, file allocation structures, your main library file, and any other data that the iPod uses to read its songs.
You can have it removed by going to your itunes and plugging your ipod back into it. Click the device then click the music tab then uncheck box that says include album artwork.. then sync again.. this time the OTHER stuff will now be removed. -
every time i try to download the latest software, i keep getting an error. the code is 2324. does anyone know what is going on?
Hi colbynathan100,
Have a look here: https://discussions.apple.com/message/22851139#22851139 -
Everytime I open Safari I get a message that says "we're sorry but the Safari browser version you are currently using does not support the Community Toolbar." Does anyone know what this means?
Have a read at this thread https://discussions.apple.com/message/15620421#15620421 with similar problem and a solution.
Stefan -
Sometimes the screen on my iPhone 3GS randomly enlarges so I cannot see or manipulate the touch screen controls. Anyone know what causes this?
Double tap with THREE fingers to turn zoom off. Then, go into Settings>General>Accessibility and turn it off for good.
-
I was trying to send a video via iMessage over wifi, but was only allowed to send a fraction of the video due to the size limit. Does anyone know what exactly the limit is? Thanks!!
You said: "I've never tried the restore function in disk utility. Would that be the same as cloning the drive?
YES! See the my old instructions below. What you might try after step 5 is to restart you MBP holding down the Option key. Select the new HDD icon and see if it boots. This way you will know that the new HDD is operable.
Ciao.
INSTALLING A NEW HDD IN A MB
1. Make certain that you have backed up all of your important data.
2. You will need a HDD enclosure. One with a USB connection will do. A 9 pin Firewire is better.
3. Install your new drive in the enclosure and connect it to your MBP.
4. Open DISK UTILITY>ERASE. From the left hand column drag the new drive into the 'Name' field. Make sure that the format is 'Mac OS Extended (Journaled)'. Click on the 'Erase' button.
5. Click on the 'Restore' button (on top). Drag the old drive into the 'Source' field and the new drive into the 'Destination' field. Click on the 'Restore' button on the bottom right hand corner.
Depending upon the amount of data you are transferring, this may take a couple hours or more. A Firewire will speed up the transfer. This will result in both drives having identical information on them.
6. After the data transfer has completed, you may swap the drives. Start the MBP and you have finished the installation. The initial boot may take a bit longer than you are accustomed to, but that is normal.
7. When you are satisfied that the new hard drive if functioning properly, you can erase the old drive and use it for any needs that you may have. -
I just purchased a new macbook pro. Have had it about 2 weeks. Last night there were 2 thin lines that are on the left side of the desktop, 1 green and 1 blue from top to bottom. This happened after I added a printer. Anyone know what this is. Fearing that is a flaw in the screen.
Sounds like a hardware problem. You'll need to contact Apple ASAP. Since it's so new, hopefully they will just replace it rather than making you go through the repair process, but that's up to them.
-
After I upgrades to ituens 10.5 songs are cutting off early. It's happened on several songs. I checked the song info ...stop time is correct. Antone know whats going on? Seems like 10.5 may have a bug ..
When you say "rebuild your library", do you just mean to import songs from your CDs, etc.? What about songs that have been downloaded from Itunes? I'm obviously having the same problem and I'm seeing a lot of people asking the same questions, but really no solid answers yet? I'd say my description matches Auntiheather's above - about 1/3 of songs, etc. etc.
-
I have been trying a lot of different stuff, but still, Safari will not remember my passwords. I don't know what else I should say here, if anyone knows what to do please tell me, or if you need to know more in order to figure out what's going, please do ask me. Thanks in advance.
Tap "Private" to disable Private Browsing (top bar should be white and not black)
-
I locked my iPad and I don't want to wait for the time limit. How can I reset it?
My brothers locked my iPad and I can't wait for the time limit to unlock it. Is there a way to reset it?
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad into Recovery Mode
http://support.apple.com/kb/ht1808 -
Help! The Apps Do not work, anyone know what to do?
Ok, i download the Myspace and the AIM App. As soon as I click on one of them it quickly takes me right back to the menu. Anyone else having this problem/ know what to do?
Just try restarting. I went through the same panic attack when some of mine didn't work, but for me, if I open 15 apps then all others opened crash (the number of apps seems to vary for different people), and after I restarted the one I wanted to try worked just fine. I'd have to assume this'll get fixed in the future however.
Maybe you are looking for
-
Titles not working, Exports lag with Snow Leopard Update. PLEASE HELP!
I just installed Snow Leopard yesterday and it installed very cleanly. Afterwards, I went and opened up iMovie '09 and everything was working smoothly except for the titles. In both the preview box and the projects, all the titles and effects were ei
-
I need to make sure I am handling all (my code and SDKs) errors in my Flex application. What's a way of global error management in Flex? Thanks
-
Drop shipment to generate IC proforma invoice
We are using standard drop shipment model. Before sending the goods to end customer, we need a proforma invoice between the sending company and receiving company for Custom clearing purpose. Is that possible? For example, Sales Org A100 (Company Code
-
[AS CS5] Sorting out multiple nested objects
I have documents where we have labelled frames for scripting. Some of our artist have pasted these labelled frames inside of duplicates of the original labelled frame, or they have group multiple objects, and pasted then into (using **paste into) the
-
hi, i have created a context object of type xsd:string and have assigned to a Message interface and have activated the change list. In Integration directory when i am configuring the receiver determination i wanted to specify a condition. i cannot se