I down loaded the latest update for itunes and now it says Ive lost MSVCR80.dll and don't know how to repair it
When requested I tried to down load the latest update for itunes and now I cant open itunes as it says Ive lost the MSVCR80.dll file and I don't know how to repair it.
I've tried re-installing as the error message instructed but that hasnt worked.
Can anyone help?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates
Similar Messages
-
My I phone was down loading the latest update to OS 7.0 and it froze showing an I tunes icon, and an arrow pointing to the cord used to charge and download.
I can't use the phone now its frozen in this screen.Hello, Indy car fan.
Thank you for visiting Apple Support Communities.
When experiencing issues restoring or updating an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H. -
After down loading the latest update the iPad wifi has difficulty connecting even though a good signal is present
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I keep getting the following message after attempting to download and install the latest update for iTunes: missing MSVCR80.dll. error 7 (windows error 126). Anyone else having this issue? How do I get iTunes back in working order?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I just got an iPod shuffle yesterday and I have downloaded the latest update for iTunes (10.7) and when I plugin it in it says that I have not got the correct software for the iPod
What is the exact error message you are receiving? Have you checked to make sure the connections on each end of the USB cable are nice and snug?
B-rock -
Why will iTunes not sync to my iPod after installing the latest update for iTunes?
Hi I have a Macbook and I just downloaded the latest update for iTunes and when I plugged in my iPod to sync I keep getting and error message. How do I fix this problem?
I haven't done one of those for a while. But the following troubleshooting document might still be worth a shot:
'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod -
What is the latest update available for Mac OSX 10.5.8 that will allow me to get the latest update for iTunes. I really need to update my iPhone and CAN'T!! GRRRR!!!
Minimally you need Snow Leopard or greater:
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion — System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion. -
Trying to install the latest update for itunes...error received "service apple mobile device failed to start. verify thay you have sufficient priveleges to start system services"...? I have uninstalled and tried to reinstall???
Hello Kimberly0914,
It sounds like you have tried to launch iTunes after a recent update due to this error message, and you cannot install iTunes after uninstalling. I recommend the troubleshooting from the following article to help you named:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Then download and install iTunes with this link:
http://www.apple.com/itunes/download/
Thank you for using Apple Support Communities.
Cheers,
Sterling -
HT1222 i have installed the latest update for itunes, (win 8 os) itunes no longernplays my music???
i have installed the latest update for itunes, (win 8 os) itunes no longernplays my music???
Hi Mike H555,
If you are having issues with iTunes after an attempted update, including device recognition issues, you may find the following articles helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
- Brenden -
I cannot download the latest update for itunes because it say the file itunes.msi is missing
I cannot download the latest update for itunes because it says that the file itunes.msi is missing
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
The latest update for iTunes 11.1.3, iBooks 1.0.1, Mail 1.0 won't update/install properly.
I recently installed Mavericks. The latest update for iTunes, iBooks and Mail do not install properly. I have tried updating individually and the Appstore indicates that they're installed. However after every restart the Appstore shows that the same update is available. I checked the applications folder and clicked on the 3 apps to "Get Info" and they're all still the old versions. I've repeatedly tried to update and install and the Appstore history has shown that I've tried over and over again. Any solutions would be appreciated please!
I'm having this same issue, except Mail and iBooks are both installed, but showing as need to be updated (to same version already installed several days ago). iTunes was also doing this until I manually installed it, but the other two still won't be recognized as updated. I did a sudo softwareupdate -i -a and that failed as well. So I did a
sudo softwareupdate -v --reset-ignored -l and showed this update is somehow broken
Not the only ones: https://discussions.apple.com/message/23716085#23716085 -
i have just loaded the latest update on my iphne now the phone is asking to connect to itunes and phone is locked, frozen and can't open up need help now desperatly
Same problem with the update, and iTunes can't find my device. I've spent the last two hours researching this and trying everyone's ideas to no avail. I hope someone comes through. Super frustrating :////
-
could you give me a hand? i downloaded the latest update for i tunes, and now im facked. i cannot open itunes. ive deleted and uploaded the new one as it says to in the 'support' section, all to no avail.
Do you get an error message when you try to launch iTunes? If so, what does it say? (Precise text, please.)
-
I have down loaded the latest software for the ipad2 and it has now locked up and will not reset
I have just down loaded the lastest software for the iPad2 and the Pad is now frozen. I have tried the reset and nothing happens. Help
This page has some troubleshooting for problems when updating/restoring the iPad : http://support.apple.com/kb/ht4097
-
Can't download the latest update for iTunes
Hi,
I tried to download the sofware update for itunes 10.6.3 for my MacBook Pro, but as soon as the download begins, it stops and I get an error message saying: "The update 'iTunes' can't be installed", and also "The update could not be verified..." and so on. How can I get the sofware update to download then? Help anyone?
Thanks,
Ilan.I'd try updating using a .dmg installer downloaded from the Apple Website:
http://www.apple.com/itunes/download/
Maybe you are looking for
-
Acrobat 9 Standard - Document Message Bar not shown in shared review
A pdf file is "send for shared review" by Acrobat 8 or 9 on a network folder. The file is shared review enabled and is storred at the network folder correctly. If the file is opened by Acrobat 9 Standard the yellow Document Message Bar (DMB)does not
-
Reader X - Getting Security Alert with a data filled PDF form
My site uses PDF forms that have their data filled in dynamically by the classic asp code on the site. Before Reader X version, they were filled and displayed without a problem. With Reader X they display the security warning: "Data from this site is
-
When will the ipad email be able to use the contacts group to send out mail?
This seems like a rather strait forward question but I dont know why Apple hasnt fixed the issue. For now the only solution is to download a third party app? That is redundant to keep up with two contact list (one for mail and the other for contacts)
-
Making our site to search by search engines like google, yeahoo...etc
Hi All, To make our client site search and display results by google / yahoo or any other search engine what needs to be done? we kept "meta" tag keywords and description in all our html file and mastheaders. What we need to do for making our site se
-
Problem opening Cineware 4D in After Effects CC
I was trying to access a file that I had already worked on that had a Cineware 4D layer. When the project is opening I am getting a message that says "AEGP Plugin CINEWARE SceneLayer: CINDERENDER - Connection failure (5027::12). Also, I tried to add