I Download Flash And It Doesn't Run Not Sure How To Fix
I have a IMac OS X 32 bit and what happens is that this computer is brand new, and I have to download flash for the first time, I think.
Every time I download the Adobe Flash App for Mac it loads and says it is successful but when I try and go to say Youtube and run a video it says I still need
to download the Flash App all over. Iv tried restarting my computer after and its the same thing. Iv contacted live chat and called and they say its a tech issue and referred me here to the forums. Is anyone having the same issue and has any help on how I might resolve this issue. Any help would be greatly appreciated.
Regards,
xxahughxx
Hi, Now after you download it, you need to Install it. Did you do that?
If you are using Safari, go to this test site and let me know if you can see the Flash Player logo(Red F) animation(spin)
What version if any of Flash Player is displayed? http://www.adobe.com/software/flash/about/
The Flash Player Installer also Installs a Shockwave Flash plugin into the browser. Is that there and Enabled?
Finally, this Troubleshooting Guide for Mac may help you.
http://kb2.adobe.com/cps/865/cpsid_86551.html
Hope this helps.
eidnolb
Similar Messages
-
When I turn on my iMac, it shows a black screen and says 'No bootable device - enter boot cd and press any key'.
I'm not sure what to do, I did not recieve a cd with my mac to boot it up (I ordered it online).
Also I can't find my harware serial number (I've tried many times to input what I thought it may be from my receipt). I saw that I need this number to contact apple support, my 90 day complimentary support is still valid so I wish to contact them.
I don't know much about apple products as this is my first apple computer so any information is helpful.Hold down the Alt/Option-key at startup of your iMac to get the Boot Selection screen.
From that choose to boot into OSX.
Once in OSX go to System Preferences then Startup Volume and reset your OSX to be the default.
The new iMacs have OSX 10.7 Lion preinstalled and don't come with any CD/DVD anymore.
Instead OSX Lion includes a new feature called "Lion Recovery".
Have a read here About Lion Recovery
Stefan -
Why all of a sudden am I having difficulty sending Gmail emails? I get a send error. When I run diagnostics there is a SMTP and IMAP account for Gmail and I am not sure how to fix this.
Hi jodilynnf,
When using Connection Doctor to see what is could be causing the issue, look for the red dots to let you know what is wrong. Then all you have to do is correct that information. You can double click on the section that is giving you issue and it will take you there. Most issues could be just password being entered incorrectly. Take a look at the article below to walk you through troubleshooting issues with Mail.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/en-us/TS3276
Take it easy,
-Norm G. -
I am receiving pop ups to security sites to secure my files etc. I assume I have a virus but not sure how to fix it.
There is no need to download anything to solve this problem.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked. -
I have two companies sending me indesign documents. One opens up and the dictionary is set to English. The other file opens at is in Hebrew, Not sure how to fix the Hebrew part and whether or not the fault lies at my end or at the other end
If only the language is Hebrew, you should correct it in the Paragraph and Character Styles.
But in such a case I would expect more problems.
If you are a creative cloud subscriber you should additionally install the InDesign version, English with Hebrew support:
Go to the preferences of you CC.app. It is found behind the Gear Symbols on the top right.
When the preferences open, go to the Apps section.
Change the App Language to English with Hebrew support.
Now you can install it. It will install on the very same place where your InDesign program is found some additional plugins, which will give you access to Hebrew functionality, like RTL text. Otherwise you will inherit in the document (and where you copy and paste it from such a document into another one). But now you can change or repair problems.
Now repeatstep 1 + 2, but you need not to install your own language again. InDesign will now, when started, run in the language of your OS (when you have it installed in that language) but with more functionality to handle problems with Hebrew documents.
The same steps you would have to do with Arabic or Asian documents. These languages will also add more plugins. But keep it limitted to those language you need. I have installed it that way, because I get sometime documen where the text flows the wrong direction or the numbers come up in Farsi digit, not in Arabic digits. For such purposes I need versions in languages I don’t understand myself. -
Ever since i plugged my iphone into the computer, all of my music has been messed up. The songs don't have the right album cover i guess they all just got mixed up somehow. i dont know but its annoying and im not sure how to fix it.
If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I'm not sure how or why this is happening and it has just started...I tried to update and then it would not allow me to open the file at all giving me a runtime error message and multiple windows (because of the help feature). It has been successfully reinstalled but I'm still getting the error message...what do I do?
Hello, MommaLloyd24.
Thank you for visiting Apple Support Communities.
Here are the steps I would recommend going through as they should resolve the issue.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Jason H. -
I updated, and now i can no longer view any files on the web without downloading them first. it's very frustrating. want to go back to the way it was, but not sure how.
You shouldn't need both Acrobat and Reader. That aside, I suggest trying to open Acrobat and using Help>Repair. Also check the plugins or addons for your browser.
-
Try to download mp4 and quicktime wants to run it instead, how do I stop this?
I have several sites where I download weekly and monthly videos, but after installing Quicktime, it wants to run them now instead when I click the download link. The only way I have found to prevent this is to disable the plugin, but that is a pain, because I installed it so I could go to a guitar training site that uses midi.
If I set it to "Save File" in Firefox>Tools>Options>Applications, it still does no good, the plugin has to be disabled, or Quicktime will play it instead of letting me download it.
I know I can right click and select "Save As", but I shouldn't have to do this, I want the Fox to work the way it is suppose to!
Besides, some sites do not allow "Right Clicking!"Have you tried iTunes for Mac version 10.6.3.25? It won't work with an iPhone 5, but it supports older devices using iOS 6.0, on PowerPC and Leopard (10.5.8) systems.
A .dmg installer for iTunes version 10.6.3.25 for Mac OS can be found at the following download page on the Apple website:
iTunes 10.6.3 -
Code Doesn't Run - Not Sure Why.....
Hello Everyone:
I have an Oracle “program” (I wouldn’t call it a program, but just some code for a one off move of data). I use TORA as the interface for Oracle. I do not have a copy of TOAD. But for some reason, when I run this code, it takes all of 0.003 seconds and doesn’t actually move any data. Below is a copy of the code. If I take the query being used in the cursor, it does return data and takes about 1.5 seconds to execute, but when trying to run this code, it takes 1/10th of that time, so I am doing something wrong but I can’t figure out what.
I also tried to copy this code into SQLPlus, but that also does not run. Can anyone spot what I am doing wrong? I am not sure if it is my environment and how I am trying to run this or the code itself is flawed.
DECLARE
-- Local Variables
l_gm_master_label VARCHAR2(20);
l_active_flag VARCHAR2(1);
l_currdate DATE;
l_comp_id VARCHAR2(2);
l_site_id VARCHAR2(2);
l_gm_master_id NUMBER;
c_serial_number VARCHAR(40);
c_creation_date DATE;
c_interface_date DATE;
c_ebiz_sku_no NUMBER;
c_ebiz_ord_no NUMBER;
-- Cursor
CURSOR serial_number_data IS
SELECT
S.serial_number,
S.creation_date,
S.interface_date,
S.ebiz_sku_no,
O.ebiz_ord_no
FROM
dmlogic.trn_rm_serial_number S
INNER JOIN ebiznet.trn_ordhead O ON S.ord_no = O.ord_no;
BEGIN
DBMS_OUTPUT.ENABLE(2000);
-- Set default values
l_gm_master_label := 'DMLogic001';
l_active_flag := 'N';
l_currdate := SYSDATE;
l_comp_id := 'XE';
l_site_id := 'OHIO';
l_gm_master_id := 0;
-- Get the next value
SELECT
trn_gm_master_seq.NEXTVAL
INTO
l_gm_master_id
FROM
dual;
-- Insert generic Gray Number master record that will be joined to all the DMLogic serial numbers
INSERT INTO trn_gm_master
(gm_master_id,
gm_master_label,
active_flag,
currdate,
comp_id,
site_id)
VALUES
(l_gm_master_id,
l_gm_master_label,
l_active_flag,
l_currdate,
l_comp_id,
l_site_id);
-- Open the cursor
OPEN serial_number_data;
LOOP
-- Fetch the values
FETCH serial_number_data INTO c_serial_number, c_creation_date, c_interface_date, c_ebiz_sku_no, c_ebiz_ord_no;
EXIT WHEN serial_number_data%NOTFOUND;
INSERT INTO ebiznet.trn_gm_serial_number
(gm_serial_number_id,
gm_master_id,
gm_serial_number,
received_by,
received_date,
picked_by,
picked_date,
ebiz_sku_no,
comp_id,
site_id,
ebiz_ord_no,
interface_date)
VALUES
(trn_gm_serial_number_seq.NEXTVAL,
l_gm_master_id,
c_serial_number,
1,
c_creation_date,
1,
c_creation_date,
c_ebiz_sku_no,
l_comp_id,
l_site_id,
c_ebiz_ord_no,
c_interface_date);
EXIT WHEN serial_number_data%NOTFOUND;
END LOOP;
CLOSE serial_number_data;
-- Commit the changes
COMMIT;
-- Rollback if an error has occured
EXCEPTION
WHEN OTHERS THEN
ROLLBACK;
DBMS_OUTPUT.PUT_LINE('ERROR HAS OCCURED');
END;When running it in SQL Plus, remember to put the / at the end of the script;
Also, remember to print out your error in your exception handler;
DECLARE
-- Local Variables
l_gm_master_label VARCHAR2(20);
l_active_flag VARCHAR2(1);
l_currdate DATE;
l_comp_id VARCHAR2(2);
l_site_id VARCHAR2(2);
l_gm_master_id NUMBER;
c_serial_number VARCHAR(40);
c_creation_date DATE;
c_interface_date DATE;
c_ebiz_sku_no NUMBER;
c_ebiz_ord_no NUMBER;
-- Cursor
CURSOR serial_number_data IS
SELECT
S.serial_number,
S.creation_date,
S.interface_date,
S.ebiz_sku_no,
O.ebiz_ord_no
FROM
dmlogic.trn_rm_serial_number S
INNER JOIN ebiznet.trn_ordhead O ON S.ord_no = O.ord_no;
BEGIN
DBMS_OUTPUT.ENABLE(2000);
-- Set default values
l_gm_master_label := 'DMLogic001';
l_active_flag := 'N';
l_currdate := SYSDATE;
l_comp_id := 'XE';
l_site_id := 'OHIO';
l_gm_master_id := 0;
-- Get the next value
SELECT trn_gm_master_seq.NEXTVAL
INTO l_gm_master_id
FROM dual;
-- Insert generic Gray Number master record that will be joined to all the DMLogic serial numbers
INSERT INTO trn_gm_master
(gm_master_id,
gm_master_label,
active_flag,
currdate,
comp_id,
site_id)
VALUES
(l_gm_master_id,
l_gm_master_label,
l_active_flag,
l_currdate,
l_comp_id,
l_site_id);
-- Open the cursor
OPEN serial_number_data;
LOOP
-- Fetch the values
FETCH serial_number_data INTO c_serial_number
,c_creation_date
,c_interface_date
,c_ebiz_sku_no
,c_ebiz_ord_no;
EXIT WHEN serial_number_data%NOTFOUND;
INSERT INTO ebiznet.trn_gm_serial_number
(gm_serial_number_id,
gm_master_id,
gm_serial_number,
received_by,
received_date,
picked_by,
picked_date,
ebiz_sku_no,
comp_id,
site_id,
ebiz_ord_no,
interface_date)
VALUES
(trn_gm_serial_number_seq.NEXTVAL,
l_gm_master_id,
c_serial_number,
1,
c_creation_date,
1,
c_creation_date,
c_ebiz_sku_no,
l_comp_id,
l_site_id,
c_ebiz_ord_no,
c_interface_date);
EXIT WHEN serial_number_data%NOTFOUND;
END LOOP;
CLOSE serial_number_data;
-- Commit the changes
COMMIT;
-- Rollback if an error has occured
EXCEPTION
WHEN OTHERS THEN
ROLLBACK;
DBMS_OUTPUT.PUT_LINE('ERROR HAS OCCURED ' || sqlerrm);
END;
/ -
Downloaded John Mayer album bur one song is cut off at the end, how to fix??
Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting that song from your iTunes library and redownload it via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you aren't in a country where you can re-download music or if it re-downloads in the state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that song and use the 'Report a Problem' link. -
When I try and open certain apps, it flickers and doesn't open, I am not sure how to fix this.
When I try and open open a certain app,it won't open and just flickers and won't do anything, does anyone know how to fix this ?
Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc. -
Top half of yahoo and msn pages to do not show, not sure how to fix
When I first open Yahoo or MSN the whole screen is there. Then it is like a shade dropping down so that only half the screen shows. I am not sure where to change the settings for this on my computer. It says something about Ads not supported by this site on the top half.
It sounds as though the ad visuals are being blocked, but the function of the page to show it is not being blocked, so you just get a blank overlay. That's not helpful, since you can't see the close button that presumably is built-in to the ad.
You have quite a few add-ons, and sometimes an extension may be responsible for removing -- or adding -- ads on a page. Could you try this:
Disable ALL nonessential and/or unrecognized extensions. If you can live without it for 24 hours or you don't know what it does for you, if in doubt, disable:
orange Firefox button (or Tools menu) > Add-ons > Extensions category
Then restart Firefox using one of the links on a disabled extension and test again. Does it make any difference? -
My MacBook has recently become really slow and im not sure how to fix it.
Over the past few weeks my macbook has become extremely slow, would anybody have any ideas of how to fix it?
One possibility is that your hard drive has become full to the point that it is hindering the speed of your MacBook. Many experts believe that your hard drive should have about 15% of its space free.
You can check your hard drive's free space by selecting it on the desktop and then typing command + i (or going to the File menu and selecting Get Info.) In the information that appears look for the capacity and available space.
If it turns out that disk space is part of your issue, you may want to see about reducing the amount of disk space in use on the hard drive. Let us know, there are a number of things you can do for this.
Best of luck. -
Not certain how to reboot the ipad. Had some instructions but alas stumped on set up. I have backed up in ICloud but need to get to a "set up"process
You restore from an iCloud backup on the iPad itself. You have to reset the iPad in the settings app. Settings>General>Reset>Erase All Content and Settings. You will then be starting from the beginning - you will be setting the iPad up all over again.
This article explains how to do it.
http://gigaom.com/apple/ios-101-set-up-and-restore-from-icloud-backup/
Maybe you are looking for
-
After upgrading to iOS 5 I cannot enter to mail (outlook exchange ),contact did not open, general settings - mail contact did not work.help me
-
Can I use the database with as the ses as a regular database?
I write a application base on SES recently, and I need to store some data in the database. Can I use the the database with ses? I can login using sqlplus login the database using the same pc as the ses installed, but I cannot login using sqldeveloper
-
How do you check if a array is full?
suppose you have a array of hmm numbers. How would you test if the array is full?
-
MacBook 2.2ghz ( Santa Rosa ) SuperDrive not reading PlayStation CD's
I've tried about 5 different PS1 CD's and it just ejects them after 1 minute failing to read them? This occurs in OS X and Vista. All other types of optical media I've tried seems to work. Any ideas?
-
I have just installed Firefox at the advice of a friend (who doesn't own a Mac), but also have Safari. It seems that my computer is running very slow now. Could it be the addition of Firefox? Do I need both?