I download lnx_920_disk1.cpio.gz, lnx_920_disk2.cpio.gz & lnx_920_disk3.cpio.gz
When I try to unzip the files I received the message unexpected end of file, I followed the how to install, is any trick on it???
Ok, I have it. I download the files sometimes, always same error appear, (not end of file found or someting like that), I decided use just NT, I download cpio and gzip(gunzip come with it) for NT and last try, I download Getright too, I use Getright to download the files, next I ran "gunzip gunzip Linux9i_DiskX.cpio.gz", next I ran "cpio -idmv -I Linux9i_DiskX.cpio", well in my Windows 2k, it work fine, my next steps are burn a CD and install it on linux, I will try it tonight, I hope it finish well for me and for all you, Thanks to all and be luck too.
Henry Gomez N.
Similar Messages
-
Cannot gunzip on lnx_920_disk1.cpio
I am not able to do unzip lnx_920_disk1.cpio or cpio -idmv < lnx_920_disk1.cpio.
Is there any know problem. Using SUSE SLES-7Ok, I have it. I download the files sometimes, always same error appear, (not end of file found or someting like that), I decided use just NT, I download cpio and gzip(gunzip come with it) for NT and last try, I download Getright too, I use Getright to download the files, next I ran "gunzip gunzip Linux9i_DiskX.cpio.gz", next I ran "cpio -idmv -I Linux9i_DiskX.cpio", well in my Windows 2k, it work fine, my next steps are burn a CD and install it on linux, I will try it tonight, I hope it finish well for me and for all you, Thanks to all and be luck too.
Henry Gomez N. -
Hello
Can you give us to download this file on our partnership?
file:
http://download.oracle.com/otn/solaris/oracle10g/x86/solarisx86_CRS_10_1_0_3_Disk1.cpio.gz
Found on page:
http://oracle-digant.blogspot.com/2006_07_01_archive.html
Thank you,
Alexey
Exigen ServicesSo we appear to be on version :- 10.1.2.3.0
Where I am confused is that the upgrade docs and posts I have looked at cover applying the 10.1.2.3 patch - i.e. 5983622 - but this patch looks to be same as the version that I have after 12.1.1 tech stack install ... and upgrade of system from 11-5-10-2 to 12.1.3.
DO I need to apply this patch ?Yes as this patch is 10.1.2.3.1 patchset -- Upgrading OracleAS 10g Forms and Reports in Oracle E-Business Suite Release 12 [ID 437878.1]
For your plan of action, it should be OK as long as you cover all the patches in the docs.
Thanks,
Hussein -
Unable to download ship_rel10_sol64_db.cpio.gz
Hello,
I try to download the above mentioned file since nearly a week. It seems to corrupt. Everytime it stops after about 20 %.
Please help.
Many thanks.Seems related to cpio version
Read Oracle 10g dowloaded file and cpio
Linux is not linux.... which one do you mean? :) -
Sun Sparcstation 5 Solaris 8 Oracle 8i EE download - 817solaris.cpio.gz
Hi,
I'm new to the Solaris environment, although I had installed Oracle on Linux. I downloaded the above file, copied it to the Sun's 9G hard drive, made sure it had 128 MB of RAM. According to the download pages, I ran the following command:
gunzip 817sol~1.gz; cat 817sol~1 | cpio -icd
The filename was altered because I downloaded it on a Windows PC. After about 15 minutes (it's a slow Sunbox), I ended up with a single large executable.
In my past experience, I had a folder to work with, with the shell scripts and Universal installer executables. This time, I just had one executable, and when I tried running it, I got an error message "can't execute". I set up an Oracle account, logged in, tried again, still won't run.
What am I doing wrong? The documentation Oracle provides assumes you have the 2 CD set, not the download.
I am a Windows Network Admin, I am experienced, and I know a little about Linux. If you have an answer, please post or write me at [email protected] Your help would be extremely appreciated. Thanks.first rename the downloaded file to 817solaries.cpio.gz thru mv command
then execute this
gunzip 817solaries.cpio.gz; cat 817solaries.cpio | cpio -icd
this will unzip your file into Disk1 directory then change directory to Disk1 and execute runInstaller from there -
Cannot download 10gr2_aix5l64_companion.cpio.gz - file is missing
It is not possible to download 10g Companion CD Release 2 (10.2.0.1.0) for AIX 5L. File is not found on download.oracle.com.
check the 'ulimit' of the user (probably 'oracle') - it is probably cutting off the size. try downloading the file as 'root' OR increasing the ulimit size.
-
Hi,
I have installed EM10.2.0.2 on windows. My target servers are LINUX Red Hat Linux Advanced Server release 2.1AS.
I am using PULL method for AGENT DEPLOYMENT.
I have found a BUG that EM AGENT 10.2.0.2 is not supported for LINUX 2.1.
Now I need to install MANAGEMENT AGENT 10.1.0.4.
I am not bale to find the downloadle agent 10.1.0.4
Please help me out in giving the location..I believe 10.1.0.4.1 will be downloadable as a Patch from metalink and will not be available from the full product download pages in oracle.com
Go to Patche & Updates in Metalink or create SR request for it if it is available
You can donwload other agents that is not 10.1.0.4.1 here
http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html -
Linux 920 Database Disk1 Problems
Hi
After spending nearly 3 days downloading 9i for linux I ended up with Disk1 being a corrupted gzip.... Very annoying. Don't know whether this was my problem or not, but now I can't download lnx_920_disk1.cpio.gz again with resume supported. disk2 and disk3 are fine!
Any ideas to a frustrated user without broadband!!!??
Cheers
ChrisThis problem doesn't just occur on Linux. I have encountered the same on both Digital Unix and HP/UX. I finally gave up and told it to just create the scripts. Looking at the scripts, there are a number of different problems depending on the items that you choose to install and/or customizations to db setup, such as size and placing of files.
To find them, I generated the scripts and then looked at the contents and used svrmgrl to individually run commands so that I could see the "real" error message.
It's been awhile but I think the not logged on was a failure in the initial create database command... Or maybe it was the MAX_ENABLED_ROLES being too small in the default init file to support some of the products... Or the rollback segments being created as private and not being automatically added to the init before the assistant does a shutdown and restart... Or it creating the rollback segment tablespace not the size and parameters that I requested...
You may guess by now I wasn't too impressed by the dbassist program. All I can say is doesn't anyone believe in testing anymore? I have a hard time believing that anyone at Oracle actually tested running this product and actually using any of it's features.
This really pissed me off because when I first saw the pretty GUI and nice interface I thought WOW, this is great, finally something to make database creation simpler than running all those commands and scripts. -
This has been broken all day. I spoke with someone in support earlier who told me that it would be fixed by "this afternoon". It is now evening in Redwood City.
Please reply, OTN Support Team --is there an ETA for this being fixed?
Thanks in Advance.How did you unpack it -
with the example given on OTN download page
cpio -idmv < Linux9i_Disk1.cpio.gz
or using some other utility - for example mc under linux.
Unpacking it with mc gives exactly the results you described - don't ask why.
use cpio with the syntax displayed above - that is you must use it with "<" redirecting the input.
Regards.
Zlatko Mesaros -
File lnx_920_disk3.cpio.gz corrupted
It seems that the file lnx_920_disk3.cpio.gz, available for download at the otn host is corrupted.
Does anyone know if it can be downloaded from another site?
Did anyone have such problem?
Regards,
Herbert939148 wrote:
Any one know where could download the below three files ?
lnx_920_disk1.cpio.gz
lnx_920_disk2.cpio.gz
lnx_920_disk3.cpio.gz
Since I can't download these files from oracle website.They can be provided after you submit Service Request to Oracle for them. -
On the oracle 9i download page (http://otn.oracle.com/software/products/oracle9i/htdocs/linuxsoft.html) the command line for cpio is stated as 'cpio -idmv filename'. My version of cpio requires 'cpio -ivmdF lnx_920_disk1.cpio'. the F is needed to state it is not comming from standard in, but from the file name that follows.
no "c" in command.
-
Oracle 9i Linux installation cpio problem
While using cpio to unpack the 9i installation files for Linux I get "cpio: premature end of file" This only happens on the first file "lnx_920_disk1.cpio". The other files unpack fine.
I am using the following:
- Redhat 7.3 kernel 2.4.18-24.7
- GNU cpio version 2.4.2
- "Oracle9i Database Release 2 Enterprise/Standard Edition for Linux" from http://otn.oracle.com/software/products/oracle9i/content.html
I have scoured the internet and found the following suggestions (none of them work):
cpio -icdcmv < lnx_920_disk1.cpio
cpio -idmv < lnx_920_disk1.cpio
cpio -idcmv <lnx_920_disk1.cpio
cpio -icdcmvB <lnx_920_disk1.cpio
cpio -idmv -I lnx_920_disk1.cpio
cpio -idmv -H new < clnx_920_disk1.cpio
cpio -idmv -H odc < lnx_920_disk1.cpio
cpio -idmv -H crc < lnx_920_disk1.cpio
cat lnx_920_disk1.cpio | cpio -idvm
I have tried all the -H formats!
What is going on? Why is this only a problem in the first archive file "lnx_920_disk1.cpio"? Even just listing the files out using cpio does not help.
A great many people seem to be having this problem.
-BrentWhen you have the cpio.gz files you must first unzip each of them.
I.e. for each file run "gzip -d <file name>.cpio.gz and when it's finished run "cat <file name>.cpio | cpio -icd" (or "cat <file name>.cpio | cpio -id").
Hope this helps
-Thomas -
I don't know what may be the problem, but i'm trying to download the Oracle 9i for HP-UX and i cannot use the CPIO files.
When i use the command:
cpio -idcmv <file.disk1.cpio>
the system does not return any error and don't do anything. The cursor stay bliking in the next line.
I've try to run this with normal user and root.
I've try to cpio the file in windows. I've download the cpio command for windows and try do run the same command and i get the message:
cpio: standard input is closed: Bad file descriptor
Any one can help me?? How can I resolve this problem?
Paulo Aboim Pinto
Amadora - Porgual
http://www.dsts.ptSorry about the POST ... the error was mine.
The correct sintaxe of the cpio is:
# cpio -idcmv < file.cpio
sorry about the post -
Cannot download third file for Linux-ia32 O91R2
Hello,
I tried to download from:
http://otn.oracle.com/software/products/oracle9i/htdocs/linuxsoft.html
and the files lnx_920_disk1.cpio.gz and
lnx_920_disk2.cpio.gz seems to work (slow, but it works),
but:
lnx_920_disk3.cpio.gz
does not download. I get always an error:
Cannot find server or DNS Error
Internet Explorer
What goes wrong here?
Thank you
BRTry going directly to this url:
http://otn.oracle.com/software/htdocs/devlic.html?http://download-west.oracle.com/otn/linux/oracle9i/9201/lnx_920_disk3.cpio.gz
Regards,
OTN -
Wrong file size on Linux download page
Hello:
This is what the Linux Oracle 9iR2 server download page looks like:
Oracle9i Database Release 2 Enterprise/Standard Edition for Intel Linux <http://otn.oracle.com/images/white_spacer.gif> Download the Complete Files <http://otn.oracle.com/images/bullets_and_symbols/red_arrow_bullet_35.gif> lnx_920_disk1.cpio.gz (553,607,967 bytes) <--- WRONG!! <http://otn.oracle.com/images/bullets_and_symbols/red_arrow_bullet_35.gif> lnx_920_disk2.cpio.gz (588,817,480 bytes) <http://otn.oracle.com/images/bullets_and_symbols/red_arrow_bullet_35.gif> lnx_920_disk3.cpio.gz (442,135,815 bytes)
The problem has to do with the first file (lnx_920_disk1.cpio.gz).
The stated size (553,607,967 bytes) is WRONG.
I have downloaded those 3 files more than a dozen times, getting
files of varying sizes. After several weeks, I finally had 3 files
with consistent sizes. However, the file #1 produces an error
message from gunzip (unexpected end of file).
If Oracle Corporation claims to be a technology- and Internet-savvy
company, they should know that the best way to avoid problems like
the above is:
- offering an FTP (i.e. TCP-based) download option
- including the corresponding MD5SUM next to each file.
Everybody else (well, probably not Microsoft) is doing this.
Why not Oracle?
Thanks from a very frustrated sysadmin.
-Ramon F. HerreraHey mister Millaard,
I have problem because Premiere always use Mainconcept DV Pro codec when import file in my case.But I find solution:
From
C/Program Files/Adobe/Adobe Premiere Pro CS3/Plug-ins/en_US
I remove
ImporterMCDVCPRO file and now Premiere import avi files as MS-DV AVI.
Maybe this can help somebody else.
lestra
Maybe you are looking for
-
How Do I Search For A Photoshop Link
I have been given the following link to a page showing search paths on an iMac computer. Can anyone please tell me how I create the search.? I have tried Spotlight which does not recognise the paths listed. http://helpx.adobe.com/photoshop-elements/k
-
When I type a web address in the location bar and hit enter nothing happens. In order to go to the website I've typed in, I must click the arrow button at the end of the location bar. How do I make it so that hitting the enter key takes me to the web
-
I have a macbook pro 2.16. I can play and edit video in FCP but when I open a file in quicktime it will not show the video.
-
I can download a program but wont instal
I downloaded a free trail of a DJ software i am thinking of buying, but after i downloaded it, i click to open and it said i couldn't install because its says this program can not be run is DOS mode. Can someone help me? Im on my first mac and am abs
-
External Web Service call from Sandbox Solution in SharePoint 2010
Can anyone from this forum can tell me how to call an external web service from Sandbox solution? It would of great help as got stuck on it for a long time. Note:- Cannot use Silverlight and JQuery to call web service from client side.Cannot use full