I downloaded 4.0 when prompted, but it did not open upon completion and now shortcut does not work and cannot find file to run 4.0 in the firefox folder. Tried restarts and reinstalling 3.6 which now also won't work for me. Ideas?
I downloaded 4.0 when prompted yesterday. Seemed to download normally but did not automatically start following download even though that option was checked. The shortcut now is broken and efforts to fix it fail because the file cannot be found. Checked the firefox folder and do not see a file to run firefox. Tried restarting twice with no luck. Then tried multiple times to reinstall 4.0 with no success. Then tried uninstalling and reinstalling 3.6 with same result.
OK. Got it figured out. Disabled my virus scanning software and the download worked perfectly. Should have thought of that before now.
Similar Messages
-
I have just plugged in my scanner (HP Scanjet G2710) however my old HP Scan software will not opne. I have found a patch on the HP site which may fic the problem (although it only sesm to go up to OSX 10.7) and having donaloaded the patch my Mac will not opne or deal with the software as it now tells me it does not recognise HP as an Apple affiliated compnay. Any help / suggestions? I don't really want to buy another scanner...
Hi,
By reading your notes I assume you didn't uninstalled the HP Software and installed the latest v10.6 software available online, any previous version will not work regardless the patch installation as it was not signed.
Be sure to follow the directions listed in here:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03428470 #A3
The latest software can be downoad from here:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=15179&prodSeriesId=3423844&prodNameId=3423845&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=sj-78355-5
Then you should reinstall the patch:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=15179&prodSeriesId=3423844&prodNameId=3423845&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=cs-97791-1
Hope that helps,
Shlomi -
My I-phone 4 froze when I was trying to sync some music to it tonight from i-tunes. I lost all my contact info, apps and most importantly photos. I had just returned from a vacation to the mountains and had 200 or so photos that are now lost I really would like to know if there is any way to retrieve them because I hadn`t uploaded them to my computer yet. I don`t mind if I have to pay a professional to retrieve them I just want to know if its possible. If anyone has any advice I would greatly appreciate it! Thanks for listening and any help anyone might have.
If the photos were not backed up with a recent backup, there is NO way to retrieve them.
-
I have downloaded Adobe Muse to CC, but are unable to open. Why?
I have downloaded Adobe Muse to CC, but are unable to open. Why?
Yes it does, but the only clickable link is tutorial within the CC. I can enter via applications on my computer, but it wants to update and then says I haven't purchased the Adobe Muse program. If I ignore to update I can however open the program. But the program should be opened via CC, am I correct?
2 jun 2014 kl. 15:16 skrev "kglad" <[email protected]>:
I have downloaded Adobe Muse to CC, but are unable to open. Why?
created by kglad in Downloading, Installing, Setting Up - View the full discussion
does you cc app show muse is up-to-date?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6427310#6427310
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
"cannot find file" after formatting and moving!!
Wanted to have iTunes library included in Time Capsule backup. So had to reformat external hardrives where all my songs are from Windows do OS. Copied everything on other HD, reformatted HD with OS, copied back all songs. HD still has same name "MUSIC", but iTunes cannot find files.
Changed in iTunes preferences the location of files to ensure it searches in the right place AND also replaced with text editor in "iTunes Music Library.xml" file all links with new address of HD (now after reformatting to OS I found it to be slightly different despite still same name).
But iTunes still cannot find the files. Everything is the same as before, HD name, directory structure, file names, etc. ONLY difference is it all is on "OS formatted" drive. Don't want to lose ratings and playlists of over 15,000 songs....is there still a solution?The moment I "drag out" the Tunes Library File, then there is nothing left there, and when I open iTunes it is empty.
That's as expected. That file is the database iTunes uses that keeps track of everything, so when you then launch iTunes, it's starting from scratch.
I can import the Playlists from the XML and they do appear, but still no songs, all is empty. If I try to reimport from the new location, then they "do not fit into the playlists", meaning ratings etc. are lost.
Then you apparently didn't get the XML file edited properly; it's not easy to do.
Why does the simple location function in iTunes Preferences not work?
It does, when used as designed. The preference is where new additions (imports & purchases) will be stored. It does not change the location for existing files.
Put the original library file back. Then launch iTunes, Get Info on a representative track, and look at the path to where it thinks the files should be and compare that to the actual path. Any difference at all will break things. If there are differences (drive name slightly different, any difference in folder names/structure, etc.; letter case counts), try correcting them in Finder and see if that gets things working again. If not, then you'll have to use the Add to Library command to get back your tracks which will lose all your ratings, etc.
Where does iTunes save the links to the original files so it can simply be changed?
In the iTunes Library file, which cannot be manually edited. -
Spotlight and search field in Outlook on MacBoon cannot find files as of a certain date. What can be the problem and how to solve?
Reinstall on both.
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it isthree times faster than wireless.
Restore your iPhone to reinstall iOS. Be sure to do this while connected to your computer and iTunes.
Tap Settings > General > Reset > Erase all content and settings. -
I just created a new profile/user on my MacBook Pro. My pointer/mouse on my trackpad. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. The Mouse moves but will not click. Already tried restarting and the pram zap. The problem starts when I log out of my main profile. I get to the login screen and my laptop stops responding to clicks. When I manage to make my way back to my main profile the mouse works perfectly. Should I just delete the new profile and try again?
If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues. -
I bought a used sprint 4s and tried to put my motorola sim which is also on sprint network into phone but it doesnt work is there something i need to do to make it work or am i SOL? major problem is that my current motorola phone is issued to me from my employer but phone ***** so i want to upgrade to the ipone i purchased but it still needs to work like my company phone as they pay the bill. help me pls
A Sprint iPhone uses CDMA when in the US. The SIM is used only when not in the US.
To use it in the US, you have to have Sprint activate it, but it is unlikely they will activate in on your company's account. -
I tried down loading mozilla firefox to use as a web browser. It was downloaded 100% then when prompted to "run" An error message comes up with a red cross and the message'This file is corrupted" and won't let me proceed. What do I do now?
It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.<br />
You can try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See http://kb.mozillazine.org/Unable_to_save_or_download_files -
prompted to update iTunes today and now it does not work. tried reinstalling and caanot successfully reinstall.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I tried updating my iPhone3g through itunes. Now i'm stuck in recovery mode and i've EVERYTHING even websites and such but nothing worked out! I've also tried restarting and fiddling with the home button but nothing still worked. Please help! What should I do??
Well, if you've indeed tried EVERYTHING, then you'll need to bring your phone to Apple for evaluation.
-
I have a web site that I subscribe to and when I pulled it up Firefox asked me if I wanted to allow it or not. Accidently I pressed never allow for this site. Opps . . How do I undo this? I tried restarting and am now stuck as I can not access my website
Do you mean saving a password?
If you clicked "Never" then you have created an exception that you need to remove.
Remove site(s) from the Exceptions:
* Tools > Options > Security: Passwords: Exceptions
* https://support.mozilla.com/kb/Remembering+passwords -
My macbook pro (August 2010) keeps freezing when apple mail starts up. This happens every 2nd time I turn on my Macbook Pro. This forces me to hold down the power button to restart my Macbook Pro. Does anyone else experience this, and is there a fix? Thx.
since upgrading to OS lion, my mac book pro (2010 August) keeps freezing (non responsive, requires restart) when i turn on my mac and the system is trying to open apple mail. while apple mail is attempting to collect new mail, the macbook pro freezes. this happens every 2nd time i try to start up my computer. this only started happening after i upgraded to OS lion. please let me know what I need to do to fix this. being forced to restart every 2nd time i turn on my macbook pro has been very frustrating. not sure if apple mail is also the cause of my macbook pro for being very slow during start-up (on the occasion the computer doesn't freeze).I am having similar 'freezing' problems with many programs (Mail, Safari, iTunes, etc.). I have done a clean install of Lion instead of an upgrade when it came out. Perhaps something went wrong with my install? I'm thinking about wiping and reinstalling.
-
hello, all of a sudden without apparent reason I can't get "MAIL" to function. It starts up but I get the color wheel turning like crazy and never ends. I've tried restarting and I still can't get it to work. PLEASE HEEELP!?
In the Desktop Manager > Sync > Configuration, make sure the calendar options are set to override Outlook.
Set it also to notify you of the changes, so you will have to approve any changes.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Dear Apple Support,
Good day to you.
This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1..
After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to restore. So i connect it to itunes and wait to restore my ipad mini because it is not opening.
After restoring it my ipad is now opening and it is like new that i need to set up again.
I set up again until i reach the apple id and password.
I put my below apple ID and password to unlock my ipad but it didn't work. The message i receive is "the apple ID cannot be used to unlock this Ipad.
What will I do? Please help.
Thank you
Sent from my iPhone
Begin forwarded message:
From: Apple <[email protected]***>
Date: October 9, 2013 at 11:53:53 PM GMT+4
To: ****
Subject: Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini
Dear Leslie J.,
Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini named “Leslie Joye's iPad”.
If you have not recently set up an iPad with your Apple ID, then you should change your Apple ID password. Learn more.
Apple Support
<Email Edited By Host>1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
Is your iPad working?
Maybe you are looking for
-
How to change the image of the favourtie portlet
Can anyone tell me how can I change the image of the favourite portlet ? I found that I can only change the title text but not the image. Any clue ? Thanks. -Maggie
-
Hi, I'm trying to capture an ingress traffic on SVI interface of my Cisco 6506 (WS-C6506-E). I've enabled NetFlow on the Multilayer Switch Feature Card (MSFC): ip flow-export source Vlan254ip flow-export version 5ip flow-export destination 172.23.100
-
Hi All, I had created a ALV grid control. I want to handle the left most button of the alv grid, which when clicked , entire row gets selected. I have to do some functionality when this button is clicked. So, can anybody help me in handling this butt
-
I have a G4 400 with Sonnet 1Ghz upgrade. I also have 2 internal drives, both Maxtor drives, 250 and 80. The 80 gig drive is my normal startup drive for 10.4.10. The 250 has a 50 gig partition for my normal startup drive backup and I decided to use t
-
Business area is missing in Accounting doc for Taxes
Hi Gurus, When I am sseing accounting doc, The business area is not showing for taxes,but its showing only for sales values. Is there any setting for getting Businees area for taxes?. Regards Rams