I downloaded an app called 'Cinema but instead of promised movies got trailers. Then I deleted it etc A dvised on help page and now it won't reinstall any ideas? Have contacted itunes x 2 but no response and unable to contact app developers.
I bought an app from itunes called 'Cinema' It promised loads of movies but all I got was trailers. No way to contact the developers of the app. So I followed the 'Support' advice and deleted etc and now it won't reinstall. there is no install button next to it!. It was only £6.99 so not a fortune but I'm wary of trying any others now. Where did I go wrong and how do I put it right?
Yeah, I know I can restore it, but I might as well go ahead and try. I just finished a backup for icloud and itunes to make sure, I'll go ahead and restore it and set it up as new and see how that works. Seems like I have no other options at this point, I'd still like to know what they did with the Download tab in itunes store, if they removed it or if I'm just overlooking it.
Similar Messages
-
I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
Thank you,
ChrisMichael,
Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
Best regards,
David -
i updated my itunes, and now it won't play any of my music. i tried deleting it and reinstalling itunes, but it still is doing the same thing: whenever i click on a song, it looks like it's going to play (and my last.fm thing starts scrobbling it) but it just doesn't play the song, ever. it sits there, with the play button played. i am so frustrated with itunes, and i have no idea how to resolve this.
Hi ryanmar,
If you are having issues with audio playback in iTunes for Windows, you may find the following article helpful:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362
Regards,
- Brenden -
I upgraded to the latest iTunes 10.2.2.12 and now it won't play any music. I can do everything else, except play music. I'm on Windows 7. Any ideas?
i had this problem and finally figured it out. all that you need to do is go to your start menu and click on computer. select your main drive, (local drive) c usually. Next open the users file follow by your user name file, which is just like it sound it is a file labled as whatever your name is as you have it on your computer. Then you open up the AppData file. Next open the Roaming file. After that open the Apple Computer file followed by the iTunes file. Now you should see the folder labled iTunes Plug-ins folder. Now just Delete that folder. After that go to your iTunes and play your music.
If for some reason you don't see the AppData file you need to go to the upper left of your screen on select organize. a drop down menu will appear and you need to select folder and searc options. a small folder options window will appear. in this window you need to select the view tab. you need to select the show hidden files, folders, and drives bubble. now hit apply and then ok. that will allow the AppData folder to be seen. -
I have downloaded updates for microsoft office and now the internet wont work - any ideas?
I have downloaded updates for microsoft office and now the internet wont work - any ideas?
If you want to simply do a 'fresh' install (versus wiping out all of your data and doing a 'clean' install) simply boot to your Recovery partition (hold down the Command and R keys whilst booting) and when the Recovery screen appears, elect to freshly install OS X.
Don't know that will solve your problem, though... did you do the 'automatic' update or download the update as a disk image (.dmg)? I wouldn't think that would be causing your problems...
Clinton -
Got this iphone from my Ghananian friend.He forgot the email and password used to active the 4s iphone currently running on iOS 7.He did a restore using iTunes and now needs to be activated.Any idea?
The Apple ID and Password that was Originally used to Activate the iDevice is required
If you do not have that information you will not be able to use the Device.
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818
There is No workaround. -
I just updated FF to 14.0.1 (Mac 10.6.8) and now netflix won't work. It's asking to restart in 32 bit mode and I changed it in the Get Info to 32 bit. No luck.
Try downloading the latest version of Microsoft Silverlight for Mac [http://microsoft-silverlight-mac.en.softonic.com/mac link text]. I just did this, and was able to play Netflix's streaming again--and without that "restart in 32-bit mode" button even appearing!
-
I just updated to 3.6.11 and now firefox won't load any web page
I just updated to 3.6.11 and now firefox won't load any webpage it
just times out I tried diableing add-ons no difference. I't on internet exploers now. Tried rebooting.Do you use McAfee Antivirus/Firewall/Security products? McAfee released a security update that is blocking Firefox 3.6.11. This should be cleared up with the next McAfee update.
-
I was able to print from my iPad to my wireless HP printer and now I can't. Any suggestions on what to do to get it back? Will resetting network settings help?
Are you getting any error messages - or is it just saying No Printers Found - if the latter this has happened to me - I have 2 networks on my airport express (my network and one for guest access0 - sometimes my iPad switches to the guest network which does not have wireless printer on it ( i dont know why it does this) - if i switch the iPad back to my network the printer shows up again
In fact see the No Printers Found message is a pretty good indication that the iPad has switched to the guest network -
Help, I previously had itunes loaded onto windows 7, but it wouldnt update, i uninstalled itunes and now when i try to reinstall i get an error message 0x80071a91. Any ideas on how to fix?
Hi Didi221,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari -
I'm trying to make purchases in itunes but once I type in my apple id and password it prompts me to answer two security questions. I don't recall ever setting this up and now I can't make purchases because I don't know the answers. Read article on rescue email address and id security questions and this was no help. Doesn't prompt me anywhere to set up the rescue email. HELP!!!
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then see if this user tip helps : https://discussions.apple.com/docs/DOC-4551
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then try Apple ID Account Security
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57 -
Upgraded to ios8 on ipod last night and now it won't play any music I didn't purchase via itunes.
Upgraded to ios 8 on my ipod touch last night. Today when I've tried to play songs I've had loaded that were not iTunes purchases, the songs will not play. The screen scrolls through all tracks on the albums quickly and returns to the album screen. All songs now have a red circle with a red square in them. Repeated selecting of a song results in the same action.
Anyone else experienced a similar problem, any ideas on how to fix... ? I've got thousands of songs that I loaded into my iTunes library from cds that now don't seem to work on the ipod.Any suggestions that dealt with 'downloading purchased' really didn't apply since the issue was with songs I imported into my iTunes library and not with content that I'd purchased. Nothing seemed to resolve the issue completely. Even went as far as completely wiping out the iPod (I really only use it for storing my music) and reloading as a new iPod.
While that did end up downloading some of the non-purchased content it still didn't download close to 2000 songs. A friend told me her daughter suggested going into settings/music/show all music and turning option off. Then sync again. No idea why but seemed to download all my iTunes library content. -
Error when updating itunes and now it won't reinstall
When i was updating there was an error, now i've had to uninstall and it won't install again saying it can't load the C drive library. Any ideas what to do?
thanksSolving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
How do I get iCal on my Mac to sync with my iphone 4.
It used to work and now it doesn't.
I am not on MobileMe or the Cloud.
Any suggestions will be most appreciated.Hi Arezzo
I'm asuming you are using iTunes then to sync? this can be done over WiFi or the USB cable.
Review your setting for the calendar sync once iTunes is open and your iPhone is connected. Make sure your Calendars are selected to sync that you need. By default all calendars will.
So the option i have for you is to reset the sync service and this will reset those settings in iTunes. Meaning that you will have to switch them on again in iTunes to sync. But this mostly clears unresolved sync issues.
Please do yourself a favour and hit backup in iTunes before doing any testing. iTunes will then keep a local backup of your iPhone in case of any data loss.
{added}
open Terminal from your Utilities folder and paste this command in to reset. OS X 10.6 - 10.8
/System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsync .pl full [press Enter]
if it prompts for a password, just type your password and hit [Enter] again.
Open iTunes then set your syncs up and it should then carry on again.
Message was edited by: WaldoWTM -
I may have deleted something and now iPhoto won't load any longer. Please help me
I'm very new with my macbook pro and I have been using iPhoto from day one.
However, I was messing around with the photos, and I deleted neccessary items for iPhoto unknowingly, now my iPhoto doesn't loat at all.
It shows loading logo spinning but never load and screen is blank.
Please help me get back my iPhoto.
Thank you.Do you have any idea what you deleted?
Try this: launch iPhoto with the Option key held down and try to create a new, test library. If you can then the problem lies with the current library.
If that's the case make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT
Maybe you are looking for
-
All-in-one printer recommendations?
I'm looking for the above for my daughter's 1.25Ghz PB with 10.3.9. Currently looking at HP Officejets 4215, 6210, 7210, and the HP photosmart 2610. She needs it to have built in fax, so that leaves out some of the cheaper ones. Any advice would be a
-
Leaving MacBook Battery in on constant AC power
I use my macbook everyday at home as my main computer and I have it plugged into A/C power 100% of the time. Is it alright to leave the batter in, or should I take it out? I have been told that leaving the battery in will cause it to die sooner, but
-
I had to change my Icloud ID and Passworrd recently through my Iphone.. I also have Icloud linked to Windows Outlook 2010 on my computer. Outlook keeps asking for my old ID and password on the computer. How do I change the information in Outlook
-
Cisco ISE 1.3 AV Compound Condition
Hello Everyone, I'm trying to create an AV Compound Condition in my ISE version 1.3, but, when i click on the vendor to select my AV Vendor, i can't see the vendors and more. I saw in another discussion that is can be a browser problem, but i have ju
-
Map Drop down to Context node with value and ID
I want to map a drop down to dynamic data. I have a table that is populated at runtime after a BAPI call. The structure is the same as if you used a simple type. i.e. Value and ID.