I downloaded Aperture and now I'm getting a "There was an error opening the database for Library " and I can't do anything else. How can I fix it so I am once again able to run Aperture?
I Downloaded Aperture from the Apple Website then proceeded to download all my picture's frp, IPhoto. The very next time I opened Aperture an error poped up stating, There was an error opening the database for Library "blank". I can't do anything with the program but hit the cancel buttom which closes the program. How do I fix it?
Is "blank" the name of your Aperture Library? If not, then Aperture is pointing to the wrong Library. Hold down the option (⌥) key while you launch Aperture by clicking it in the Applications Folder. Then select the correct library and press the "choose" button.
If that does not help, try to repair your library:
Locate Aperture library in Finder. Holding down the keys option (⌥) +command (⌘) and double click on Aperture Library to show the First Aid dialogue:
Then try to start Aperture again. If that also should fail, try the other steps in Aperture 3: Troubleshooting Basics: http://support.apple.com/kb/HT3805
Good Luck
Léonie
Similar Messages
-
I can't open aperure. Following message appears: There was an error opening the database for library.
Try starting Aperture while holding down the command and option keys. This will open the library first aid window. Select library repair, when it is finished the library should open.
If you still have a problem post back. -
I just bought aperture and downloaded it from app store. when I try to open the app I get a warning message that says: There was an error opening the database for the library “~/Pictures/Aperture Library.aplibrary”. The only option the is to quit. What is wrong?
Hi,
not sure what the problem might be, but you can try the following:
While pressing ALT+CMD on the keyboard, click on the Aperture icon in the dock: Aperture then opens in a special "recovery mode", and you're prompted to choose what kind of repair you need: Repair Permissions / Repair Database / Rebuild Database
Considering the situation, I'd recommend you to try "the "Repair Permissions" option first.
If that isn't enough (and it may well be the case), then go straight for the "Rebuild Database" option; it's a non-destructive opration anyway, but since you've just installed Aperture you shouldn't have anything valuable in the default library...
NOTE: if you do have some pictures in the library, instead, do a backup first! Time Machine is your friend
Another option would be to launch Aperture while keeping only the ALT (option) key pressed: Aperture will ask you what library you want to open, or you can choose to create a new one from scratch.
Good luck!
Corrado -
Trying to open Aperture, but I get the message, "There was an error opening the database for the library “/Users/davewasson/Pictures/Aperture Library.aplibrary”. - and it forces me to quit. What do I do?
Dave-
You can try opening the old (problem) library by launching Aperture into Library First Aid mode and choosing to Repair (first option) or Rebuild the library. Before doing this, make a backup copy of the old library, since both Repair or Rebuild will write changes to the library database.
Repair is the faster and less drastic option, so try that first: After backing up your library, hold down both the Option and Command keys while dragging and dropping the problem library on the Aperture icon. The Photo Library First Aid window appears. Select Repair Database, then click Repair. After some time Aperture should open the library, if possible.
If that fails launch Aperture back into Library First Aid and select Rebuild Database. Depending on the size of your library this operation could take some time, up to several hours for a very large library. When the main window appears you may have some extra Recovered folders/projects. This operation rebuilds the library from scratch and is usually successful at reviving problem libraries. -
There was an error opening the database for the library “/Users/stacia134/Pictures/Aperture Library.aplibrary”. Why am I getting this message and how do I correct it so that I can open Aperture???? any suggestions would be most appreciated
Then I'd check the system drive, if it has problems.
To check your System drive boot into the Recovery Partition, see: OS X Lion: About Lion Recovery
Restart your Mac and hold down the Command key and the R key (Command-R), and keep holding them until the Apple icon appears, indicating that your Mac is starting up.
You will see a panel, where you can use Disk Utility to check your System Drive. -
Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?
Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue. -
When i try to open aperture, i get a box popup that says;
Warning-There was an error opening the database for the library “~/Pictures/Aperture Library.aplibrary”.
Can anyone help? I cannot accesss aperture. this is the 1st time this has ever happened...
thanks,Try running a repair on the library. Hold the command and option keys down while starting Aperture, this will open the repair window. Select Repair Library.
See Aperture 3: Troubleshooting Basics
If you still have problems post back -
There was an error opening the database for the library “/Volumes/Aperture Master/Unknown/Aperture Pictures/Aperture Library.aplibrary”.
What do I do now. I cant access the photos on the drive. The only option is Quit? what ??????????
Please help ready to throw computer and drive out the window. I have a deadline of next Tuesdaythe 11th.Start Aperture while holding down the option and command keys. You'll get a Photo Library First Aid dialog as below.
Try Repair Database first. If that doesn't work, then redo the startup with option-command and try Rebuild Database. These repair processes can take a long time with a larger library.
If all that fails, you can try creating a new library from scratch and then try importing the old library into the new. This sometimes can fix problems that can't be repaired the First Aid way.
Also make sure the drive where the Aperture library is located is working properly. You can check it with Disk Utility app. -
I was uploading 655 images from my Nikon D300S to aperture, all was going fine, went to make a coffee and came back to find Aperture had quit and this message was on the screen ––
There was an error opening the database for the library “/Users/james/Pictures/Aperture Library.aplibrary”.
–– when I now try to open aperture I always get the same message and it won't open.
Any help would be greatly appreciated
Aperture 3.4.5 and OSX 10.8.5Thanks William Lloyd and IeonieDF
First opened First Aid by holding down alt and cmd while double clicking Aperture
Tried Repairing Permissions and repairing Database in First Aid but neither worked –– so then did a 'Rebuild Database' and I'm back in action
Thanks for taking an interest guys -
I have three aperture libraries. But just recently two of them (old from 2011) will not open. I get the following error: There was an error opening the database for the library “~/Pictures/Family IIi.aplibrary”. Please help, thanks
Are all three libraries under your account or are they in different accounts? Any other errros on the system?
Start by doing the permission repair and library repair steps in Aperture 3: Troubleshooting Basics -
When I try to open my Aperture Library, I get this message: "There was an error opening the database for the library “/Users/alyssabouma/Pictures/Aperture Library.aplibrary”.
I have already uninstalled and reinstalled the library....Help!!lyssalou,
what is your Aperture version and what is your MacOS X version?
What happened, before this problem occurred? Did you import images, install software, move the Aperture library?
I have already uninstalled and reinstalled the library....Help!!
What do you mean by reinstalling the library? Did you reinstall Aperture?
You might start the trouble shooting with using the Aperture Library First Aid Tools - repairing the permissions, repairing the library, and rebuilding, if necessary, see:
Aperture 3 User Manual: Repairing and Rebuilding Your Aperture Library
Before rebuilding the library, make a backup of the Aperture Library, if you do not have one.
Regards
Léonie -
When I try to open aperture (which has worked great for months), I get this response:
There was an error opening the database for the library “~/Pictures/Aperture Library.aplibrary”.
Please help!! Thank you!! =)Sonny3300, your signature says "Aperture 2" - is that correct? Then you need this trouble shooting guide:
Aperture 2: Troubleshooting Basics: http://support.apple.com/kb/HT2945
What is your Operating system version and where is your library located? Have imported new images recently or changed the location of your library?
Regards
Léonie -
My external drive accidently unplugged and I got this message: There was an error opening the database for the library “/Volumes/iTunes LaCie/Aperture Library 2.aplibrary”.
Can someone help? My external drive is called "iTunes LaCie"
THANKS!!
I already repaired the disk...Open Aperture while holding down the option and command keys and run Repair Library
-
I was using Aperture (3.4.1), when he appeared a notice that asked me to stop the Mac with the power button. When I restart Aperture no longer opens and the following message appears: There was an error opening the database for the library "/ Users / Andrea / Pictures / Aperture 3 Library.aplibrary."
How can I solve this problem?
ThanksAfter a system crash your Aperture Library may be corrupted, because Aperture may not have been able to finish the ongoing database transactions.
Have you tried the Aperture Library First Aid Tools?
Aperture 3 User Manual: Repairing and Rebuilding Your Aperture Library
Try "Repair Database", and if this does not help: "Rebuild Database"
Regards
Léonie -
When opening Aperture I get Warning that says "There was an error opening the database for the library “~/Desktop/Feb 12, 2011.aplibrary.” That's it. The program does not open at all. I'm concerned that my pictures may be lost. Does anyone know how to deal with this Warning?
Might just need to rebuild the library...see this link:
Aperture 3: Troubleshooting Basics
Maybe you are looking for
-
Firewire Target disc mode - icon is freezing
Looks like my old Powerbook is getting close to biting the dust. I've actually worn a hole in the track pad and the cursor is getting jiggy. It's running 10.3.9 and is completely full. Oh, and the screen glows a sickly color of yellow. Honest, this t
-
Can't find a lookup defined via Oracle Apps in the FND_LOOKUP_TYPES table
Hi, i defined a lookup via Oracle Apps, but when i query for it in the FND_LOOKUP_TYPES table, it does not show up. Does something more needs to be done for the lookup definition to appear in the table? Thanks,Smita
-
Dashboard is not showing on the Dashboard banner (menu)
I have created total 15 Dashboards. In that when i am opeining Presentation services only 7 Dashboard's showing. Remaining Dashboard's not showing. I given access every one to Read to all the Dashboards and One Dashboard opening by default but it is
-
HT5887 Using My MacBook Pro Is it possible to send files to my iPad Air?
Just wanting to know if there's maybe another app that is capable of letting me do such a thing.
-
Windows Server 2008 Activation
Hi All, As mentioned at Microsoft website Windows Server 2012 eligible to downgrade to Windows Server 2009. I had already installed Windows Server 2008, can I know how to activate it? I failed to activated it using my Windows Server 2012 license key.