I downloaded iOS 6. Now my music will not play.
I downloaded ios6 which caused my phone to lock up. After restore, I synched my iPhone but cannot play the music.
I am also in the same boat. I tryed everything and I can't get my music back at all. I tryed updating my itunes but itunes says my software needs to be 10.6 or later. So I try getting the software and then that won't install correctly. I am not happy about losing all my music on my phone. Any suggestions?
Similar Messages
-
Since downloading ios 6 my iPhone 4 will not play itunes when docked - plays ok when not on dock. Has anyone else had this problem?
At least I'm not the only one with the issue. I was looking it up so see if others had the same problem and found a bunch of posts about it. I'm assuming it's not the phone then, it's the software. Should I bring it to the Apple Store? Replacing the phone seems stupid, because the phone isn't really the problem. It's the software! Maybe the iOS 5.0.2 will fix it??? I don't really want to wait though, it's a pain. If a lot of people have this issue it should get Apple's attention. They need to do something to fix it, ASAP!
-
I just upgraded to ios 5 and now my music does not play at all
I've tried hard reset and resynced a dozen times with nothing any helpAll my music is greyed out on my iPad. I did buy a song on my iPad this morning and now it is on my iPhone but no other music is on my iPhone.
-
I have tried going to general, settings, usage, then music app and says no data.
to try and delete my music and re install on itunes.from your first post this morning I provided you a link that explains what you need to do.
Iphone 4 help -
I just downloaded ISO6 and now my music won't play. How can I fix this?
I just downloaded ISO6 and now my music won't play. How can I fix this?
Hi Jackson,
Since you have already done a restore of your iPhone, I would suggest that you now try restoring your iPhone to factory settings, set it up again and test before you restore your content. This article describes the process -
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Note - It is important that you follow this stop:
Use iTunes to back up your device and transfer and sync any additional content to your computer.
Thanks for using Apple Support Communities.
Best,
Brett L -
I have a n IPhone 4S. I upgraded to IOS7 and then tried tp go back to my prevous IOS and now my phone will not turn on at all.
I tried to do the same, but couldn't find ios 6. I even tried the APPstore, to download the last IOS6 version.
The most problem is the running out of the battery.
I've checked each app who is "eating" the most power.
The battery stoped runaway, when I closed the weather service....
So for now, I will use regular internet service, and probbaly will do to more app.
Until, finaly, I will find my self with all the applications closed....:-)
That will be the sign, to replace my phone to anderoid....:-)
Till now, there is no any sign from Apple to have a glance to our complanes. -
i upgraded my iphone 4 ios and now my phone will not restore -
I have run into the same problem.
1. I was sharing the same itunes account with my wife for both of our iPhones 4s. She upgraded her phone to IOS7 two weeks before I did. After I did we ran into problems with messaging. Because we shared itunes account, both iphones were linked. When I sent text messages to someone, she got a copy. When they replied, she got a copy. I tried several ways to remove her phone from my profile, but would not work with new IOS7. I had to create a seperate itunes account for my phone in oirder to do so, as recommended on several help forums.
2. I backed up my phone onto itunes before setting up seperate itunes account. It showed that all the photos, contacts, notes, apps, etc. were synced and backed up.
3. I logged off itunes (former shared account- now wife's account), logged into new itunes account, and proceeded to restore my phone, while logged into my new itunes account, thinking this would delete my wife's phone from the profile as shared devices.
4. Phone would not restore by automatically syncing with itunes, by selecting back up recovery file to recover, or even by deleting everything and starting fresh as if it were a new phone, then trying to restore the data file as if it were recovering the backup info onto the new phone.
5. I get the same **** initialization loop sequence on the iphone every time, even after itunes goes through the recovery process, syncing all data, etc., multiple times. The iPhone loops through the grey screen "Welcome" in different languages, then asks which wireless server I want to connect to, enter passcode, then asks if I want to set up phone as a new device, backup from iCloud, or from iTunes backup. It does not matter which I select. It prompts me to connect to iTunes again. The point is, I have already been through these procedures and the iPhone cannot get past this point and enter run mode, showing me a screen with all my recovered settings.
For time being, just to have a functional phone, I have had to delete everything off the phone and set it up as a new device, back to factory settings. Then the phone will get past this and enter into run mode showing screen and apps with factory settings, no contacts, no email ( have to set up again), no voice mail ( have to reset).
Any ideas on how to over ride this reset mode in the iPhone, when all I want to do is download and recover settings from a backup in iTunes to the device? -
I have updated my iOS and now my hotmail will not verify my password through apple mail app. I have reset password - tried new password and old password and it still gives me password incorrect. Hotmail works fine on Mac. Has anyone had this difficulty and been able to resolve it?
Did you try deleting the mail account, then adding it back? I've read a lot of times that is what needs to happen in order for it to work properly.
-
Have Ipod Touch 2nd Gen. 64 gig. I noticed that my music will not play alphabetically anymore. Don't know exactly when this occured. I checked all my settings so doesn't seem to be that.Apple no longer is upgrading this unit..I use windows XP but don't believe this is an issue since i have read posts saying this is not the problem..right now am converting my higher bit rate music to see if that changes anything. I also turned off my unit and the next thing am going to do is a restore if this doesn't work. Anyone find a fix for this yet? I also see that this is not a unique problem to Gen 2 units and is occuring on newer units as well..thank you all for any advise...
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
Installed Windows 7 from XP. Downloaded itunes and imported the music library.
Now some songs will not play until I authorize this computer by signing in using an old apple id. Now when I do that the message says too many devices on that id.
Is there a way to convert those songs to my current Apple id? Or is there a way to download them again under the new id?Content is permanently tied to the Apple ID that it was acquired with.
If you desire the conent on your current Apple ID, purchase it with the current Apple ID.
For future reference, do not create a new Apple ID simply because of a change of email address. Instead, update the Apple ID with the new email address. -
please help, someone that doesn't have the savay on moving music from an old pc to a new pc. Music will not play message comes up and have to search. also purchased music from iPhone and does not show on my music library on PC. This is very frustrating. Thank you
It all depends on exactly how you move the library from one machine to the other. The database holding information about your library is normally in a folder called iTunes, with the media in a subfolder called iTunes Media. In this layout you can usually copy the entire iTunes folder from one machine to the other and it will work. If the media folder is split to a new location however then often the links to tracks will fail on a new computer.
You shoud find that the FindTracks script is able to repair the links in your library.
I'm not sure I know what is going on with the purchased music, however if you enable Edit > Preferences > Store > Automatic Downloads > Music you should be able to recover your past store purchases.
tt2 -
How come my music will not play without wifi??
How come my music will not play without wifi??
It happens when you download from two or more different Apple IDs often. It says you must waut 90 days before you can play it without wifi. So in 90 days, try to download again.
Good luck! -
Since my IPOD Touch upgraded to IOS 8.1.2 it will not play well with my 2013 Charger's UConnect entertainment system. It will not build a library so I can not Browse or Shuffle. The only thing it does is list all the songs alphabetically when connected via USB.
- Contact the manufacturer/go to their support site.
- Sometimes this works
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
Sometimes and ISO update breaks compatibioity and a firmware update the the dock is required or an iOS update is required.
Downgrading the iOS is not supported by Apple. -
Music will not play during a slideshow launched from Flickr. After choosing music and starting slideshow, the screen says "loading" and it never stops. Under the computers section it says, turn on home sharing in iTunes on the computer with the music library. It is on but apple tv wont recognize it. I've signed out and signed back in over and over and home sharing is on but music wont play. Is this a bug with flickr? Music will play when i launch a slideshow from the iPad but it doesnt have as many cool options for slideshows as flickr does. I want the flickr slideshow to play with music!!! Grrrrrrrr!!!!! Can anyone help???
ok, major miracle. it is now working. here is how i fixed it, and it was a stroke of luck to even find this. opened iTunes, went to edit, then to preferences. box pops up, went to the sharing icon and clicked share my local library on my local network. then scrolled down and checked all the boxes that were applicable. for the heck of it i went through all the other headings to see what else might be hiding from me. i never thought this would do anything but went to ATV, selected flickr, chose some music and wa-la....its playing. also, under the computers heading, it still does not show my iTunes library but clearly its there someplace. oh well, it works...i'm happy! your reply inspired me to keep working so thank you for that!
-
My music will not play since upgrade to ios6.1
my music will not play on my iphone 4s since upgrade to ios 6.1
done that thanks, it is only the music loaded prior to the upgrade new purchases are ok.
Maybe you are looking for
-
How do I cross-reference photo folders?
My photos are organized in folders according to the week they were taken, and I want to keep it that way. But if I want to pull up just the photos that have my friend Brian in them, how can I do that? First off iPhoto is NOT an option. I have used se
-
Hi I m facing an error on standby database(Physically) when i trying to open it in read only mode it gives error SQL> ALTER DATABASE OPEN READ ONLY; ALTER DATABASE OPEN READ ONLY ERROR at line 1: ORA-01092: ORACLE instance terminated. Disconnection f
-
Disk Image couldn't be opened error 4960
I can not open the disk image. I have over 200 gig of memory on a 3 month old macbook pro. I cant do anything in the download assistant. - I would send pics but you dont support mac print screen file types by the looks of it PNG. What should I do now
-
I have an external drive with quicktime clips on it. I could not use the log and transfer tool to bring these in I kept getting an error message stating "Clips contain unsupported media or has an invalid directory structure. Please choose a folder wh
-
Errors while validating after import
Hi In FDQM, i have give the source and targets for mapping of a custom dimension. One of the source is getting calculated using FDM scripts as based on the data, it generates the metadata member at source. I can see a proper import happening and the