I downloaded IOS 7 to my computer and now my iPad is disabled without me putting in a passcode
I updated my iPad with OS 7 and now it is asking for a passcode that I did not put itn and now it is dasabled. Does anyone know what I can do to enable it?
Of course the user entered a passcode, this is part of the iOS 7 install.
Enter the password that the user created, or restore the device via iTunes on the computer that it normally syncs with to remove the passcode.
Similar Messages
-
my ipod touch 5 wount let me back in after trying to update ios with my computer and now says connect to itunes. it still wount work when i plug it in and click restore for it?
it went through the extracting software stage but then an error message saying that it encountered problems came up and it didn't restore.
-
I just downloaded ios 6.1.2 and now my iphone 4 wont hook up to a charging device
i just downloaded ios 6.1.2 and now my iphone 4 wont accept a charging device there is no error message, there is no little lightening bolt in the battery icon to show its charging, i have tried several cords and several wall outlets and hard rebooted my iphone several times and still it wont charge. if there is anybody that can help me it would be greatly appreciated.
I believe what is happening is that when charge gets below a certain level (maybe less than 5% remaining), the indicator stops properly functioning. I'm experiencing this issue on both my iPhone and iPad and if I leave them plugged in, eventually they start charging or showing that they are charging. I'm traveling so this is the first time on 6.1.2 that my devices have been below 10% since the update. I bet in the last update, to appease those with drain issues, the battery charge indicator was manipulated much in the same way the celluar bars were several years ago for those who where "holding" their phones incorrectly.
-
Recently downloaded ios 8.1.2 and now my wifi button will not slide to on and I also cant use bluetooth and icloud any ideas on how to fix this?
Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you probably have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support. -
A friend downloaded music from his computer and now I cannot connect to WIFI
A friend downloaded music from his computer and now I cannot connect to WIFI
A friend downloaded music from his computer and now I cannot connect to WIFI
-
i updated my itunes to ios 6.1.3 and now i do not know how to put music on my ipod...someone help!!!
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod.... and follow the instructions. -
I updated my iPad to iOS 8.1.3 and now my ipad does things on its own. It opens apps, begins typing and numerous other things.
If it has NEVER been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this. -
I updated to iOS 7.0.3 and now my iPad needs to connect to iTunes
I updated to iOS 7 with no issues. Last night I went to update to iOS 7.0.3 and now my iPad wants me to connect it to iTunes. I tried holding down both buttons to restart and get the same message.
The same thing happened to me but with my iPad 3rd Generation so I just came across this and I'm restoring my iPad now but I'm not sure if you will have to on iPhone but here is the link https://discussions.apple.com/message/23027173#23027173#23027173. Hope this helps
-
My 9 yr. old daughter installed a password to unlock and lock her iPad which she forgot and now her iPad is disabled. We can't even connect to iTunes thru the computer. Please help.
Forgot or Wrong Passcode
http://support.apple.com/kb/HT1212
Forgot Passcode use recovery mode to restore
http://support.apple.com/kb/HT1808 -
I just updated my Ipad 2 to IOS 7, now it is asking me for a passcode. I never set a passcode on my Ipad, so how can I enter a passcode. Earlier today I upgraded my Iphone 5 to IOS 7 and it asked me to set a passcode, which now works fine on my Phone. I tried using the OIS7 passcode I use on my Iphone 5 and it did not work and now my Ipad is disabled. Both devices are on icloud and share the same apple id. The Ipad screen says slide to set up but then there is a prompt for passcode, not for setting up passcode
I called Apple Support and a supervisor helped resolve this for me on my iPad. I suggest calling them for help as this is obviously an issue with the iOS 7 update - she helped me without charge. I could be missing something in my upcoming description, so do not take this as complete - call them.
I had to update iTunes on my Mac Air to the latest version, and I had an iCloud backup from the day I updated to iOS7. Have iTunes open but do NOT connect your iPad yet. Shut down the iPad. Then press/hold the Home key on the iPad while you connect the USB from the iPad to the computer (an image of the USB cable appeared on the iPad). Follow the prompts in iTunes to restore and then backup using iCloud. When the iPad rebooted again to do the backup install, I got the same pass code issue and iTunes would not recognize the iPad without entering a pass code. I disconnected the iPad, turned it off, pressed the Home key while connecting the USB cable. When I did the restore and backup from iCloud the second time, it worked without the pass code issue occurring. -
How can I reset my access passcode without having ever synced the device before? I don't remember my passcode and now the ipad is "disabled" from too many failed attempts.
You will need to reset the iPad back to factory defaults : iOS: Forgot passcode or device disabled
What iTunes purchases that you can redownload for free from the stores will show in the Purchased tabs in the App Store and iTunes Store apps, and the Purchased tab in the iBookstore in the iBooks app -
My phone was stolen and my icloud is loged in and now my ipad is disabled and now asking for activation and it says there that i have to put my icloud account and i tried loging in my account but it says that it cannot open with that icloud account what do i do????
Welcome to the Apple Community Robin.
Contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan. -
Downloaded IOS 8.1.3 and now phone will not switch on or charge
I updated my Iphone 5c with IOS 8.1.3 and now it is in recovery mode and will not switch on or accept a charge for plug in , battery or car charger.
HELP !Hello brianjohnwatt,
Welcome to Apple Support Communities.
The article below provides troubleshooting tips that should help you resolve the issue with your iPhone 5c not turning on since updating iOS.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Take care,
-Jason -
Need assistance with recent upgrade. I installed 6.1.2 and now my iPad is sluggish and will not play music from iTunes.
1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down until you see the Apple Logo. -
I bought a new computer and now my IPad won't snc
I bought a new Apple laptop and now my IPad won't sync. It shows up on the left side but when I try to sync it, it says the apps installed can not be deternined. Does anyone have any idea what my problem is? Thanks in advance.
Did you transfer all of your iTunes content/iTunes library to the new Mac? If you didn't, have you transferred purchases into the new iTunes library from the iPad?
Maybe you are looking for
-
SQL Reports Bad Idea Against RMAN Catalog?
11.2.0.1 SPARC 64 We use OEM to manage/execute our backups. The MML is NetBackup. One downside to this is that the "job" within OEM executes the backup for 20+ databases. In a serial fashion the backups occur in NetBackup...but most are queued - they
-
M-audio stops working with Logic Pro as soon as I hit play
I've not found a solution to this anywhere. I've got Logic Pro 9 and hooked up a M-Audio Oxygen 49. The computer and software see the Oxygen okay and I can play any sound I want through the software. Until I hit play - trying to add a track to a reco
-
How do I retrieve all the songs I paid for through itunes on my 3gs, I never backed them up on my previous phone before it broke ?
-
OS: SunOS 5.10 DB: 10205 单实例 症状: 实例明明已经open,且通过tnsname可以从客户端正常连接,但是本地采用sqlplus却无法登陆: / as sysdba显示登陆的是一个idle instance, 使用普通用户则直接报告memory not exist: 当使用sqlplus / as sysdba本地登陆并尝试mount时,则显示ORA-01102: cannot mount database in EXCLUSIVE mode: 该机器安装有11203
-
Does Oracle 10G XE collide with other installed Oracle products?
I have IDS 9i (Forms and Reports 9i) installed on my laptop for use with our remote database. Does Oracle 10G XE do anything with my Oracle home settings? I have Windows XP SP1 on my laptop. Mike