I downloaded the ios7 onto my Ipad2 and now I can't get online!

I am at a loss!  I am not technically knowledgable at all.  I downloaded the ios7 onto my Ipad and now its telling me the ipad isnt connected to the server. Then I looked somewhere within the ipad itself and saw a whole list of things that said it crashed!  I'm lost...can anyone help ...immediately?

Try This...
Close All Open Apps...  Perform a Reset... Try again...
Reset  ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iPad device settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
If still no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

Similar Messages

  • I recently downloaded the newest version of itunes and now I can't get it to open

    I recently downloaded the newest version of itunes and now I can't get it to open

    I got that Exact message...  I think I updated my version of iTunes and it worked correctly.
    Hope this helps...

  • Downloaded the newest version of itunes and now I can't access any of my libraries. It says The file iTunes Library.itl cannot be read because it was created by a newer version of itunes. Any help??? I have checked my entire computer!!!!!!

    Downloaded the newest version of itunes and now I can't access any of my library. It says The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. Anybody know what to do?????

    I got that Exact message...  I think I updated my version of iTunes and it worked correctly.
    Hope this helps...

  • I accidentally deleted iPhoto on my mac and it says the the app was downloaded with a different apple id and now i can't get the app back without paying $14.99

    i accidentally deleted iPhoto on my mac and it says the the app was downloaded with a different apple id and now i can't get the app back without paying $14.99

    Did you install it yourself are somebody else for you?
    If you installed them yourself, but do not remember which AppleID you used, try all AppleIDs you might have used in turn.
    If somene else set up your Mac for you, ask the person to reinstall it. If you bought the mac second hand, the previous owner needs to contact Apple to transfer the iLife apps. If that is not possible, delete the apps that you cannot update and buy them using your AppleID.

  • I was playing around with the size of my window and now I can't get it back to the standard size, any suggestions?

    I was playing aaroound with the size of my window and now I can't get it back to standard size. Any suggestions?

    If you're using Lion, you can resize by dragging from any corner, in Leopard and lower it can only be resized from the bottom right hand corner.

  • I just downloaded the latest version of FF and now I can't send messages via hotmail.

    On April 6th, 2011 I downloaded the latest version of FF and shortly thereafter I found that I could not send mail from my hotmail account. I can receive, edit, read etc. I can do most everything EXCEPT send. I can, however, send mail from IE so it is definitely something within the new FF.

    Yup I experienced the same problem. My workaround was to throw out the latest version and go back to iTunes 10.5. I'm on a Mac so the problem is on both PC and Mac platforms. Hard to believe that this software got released with such a serious problem.

  • HT4993 My new 4s ran the battery all way down, and now I can't get the phone restarted please help

    My new 4s had the battery run all the way down, how do I get restarted?

    "You have to change your router's IP address to be able to access it. It will not give you the internet."
    I'm not sure what that means Richard, but I did change the router's IP address from 192.168.1.1 to 192.168.5.1- isn't that what you meant in your first post. I know that isn't reflected in my screen capture that I took last night, but I did do that this morning after I read your post.
    "Log on to your router and change two settings.
    Change the setting in Setup from PPPoE to Automatic Configuration-DHCP and click on save.
    Click on Advance Routing and change the setting from Gateway to Router then click on save."
    I did this and still same results as far as I can tell. Can't get online through the router.
    "Click on MAC address clone under setup tab ... click enable & click clone ...click save settings ... Check the IPaddress under WAN page ....
    If getting IP in public range .... try going online ...."
    I tried this- at least to the part about checking the IP address under WAN. I assume you mean the WAN page in the modem setup- nothing looked any different after trying what you suggested, and I'm not really sure where I would be "getting IP in public range" or what that means.
    I'm about to give up and just buy a new router to see if I can get the same lack of results with a different one. My ISP maintains that everything is set up correctly on their end and really can't do anything more for me. The Modem works and is set up correctly and they can give tech support for a router.
    Here's what my basic setup looks like now:
    http://i490.photobucket.com/albums/rr270/SukarUDL/BasicSetup.png
    Here's what the advanced tab looks like now:
    http://i490.photobucket.com/albums/rr270/SukarUDL/AdvancedRouting.png
    Modem setup looks the same
    Message Edited by Writersbloc on 09-25-2008 07:05 PM

  • I reset my WRT54G and now I can't get online.

    I did a factory reset of my WRT54G v.2 last night after I was unable to access the router's setting to set up a WEP password (couldn't remember login/pass and the default login wasn't working) and now I can not connect to the internet through my router.
    -I have no problem getting online when I run directly through my DSL modem.
    -I called my ISP to see what they recommended- someone told me perhaps a modem reset would help. I'm on a DSL modem, which they had me configure to PPOE. I set up the router for PPOE under the basic settings tab, adding my user name and password. I changed no other settings. Basically my ISP said everything was normal on their end.
    -I've Downloaded the firmware and updated that through the router
    -When the router is fully connected there are no light anomalies that I know of (WLAN light and 1 & 2 ports are solid, internet light blinks once every 5 seconds or so).
    -I've tried powering down, unplugging, and waiting- all the usual tips.
    -My wireless computers acknowledge the router's existence, but like the wired computers, are unable to connect to the internet.
    -On my network's properties the number of packets sent and received climbs at a very small rate, but they do increase (I'm told that activity is a good sign).
    -One of the oddest things is, when I attempt to run the installation software, when connected to the internet directly through my modem, as suggested by the installation wizard, the first step that attempts to check for an internet connection says it can't find a connection even though I can browse the web perfectly fine.
    EDIT: I think this might be caused by my ethernet cable/network running through a secondary port in the back of my PC. The start up disk is looking for a signal from the default/1st port and therefore getting no connection, even though my computer is online. Will have to check this later.
    -When connected to my modem, I run cmd then ipconfig, my IP address is
    192.168.1.13, is there something I need to do with this in the router set up?
    Does anyone have any idea what I could be doing differently? I've reset my router before and never been this stuck. I called customer support but they basically wanted $40 to troubleshoot my router as the warranty has expired and I'd almost rather just buy a new one.
    Message Edited by Writersbloc on 09-24-2008 08:46 PM
    Message Edited by Writersbloc on 09-25-2008 08:22 AM

    "You have to change your router's IP address to be able to access it. It will not give you the internet."
    I'm not sure what that means Richard, but I did change the router's IP address from 192.168.1.1 to 192.168.5.1- isn't that what you meant in your first post. I know that isn't reflected in my screen capture that I took last night, but I did do that this morning after I read your post.
    "Log on to your router and change two settings.
    Change the setting in Setup from PPPoE to Automatic Configuration-DHCP and click on save.
    Click on Advance Routing and change the setting from Gateway to Router then click on save."
    I did this and still same results as far as I can tell. Can't get online through the router.
    "Click on MAC address clone under setup tab ... click enable & click clone ...click save settings ... Check the IPaddress under WAN page ....
    If getting IP in public range .... try going online ...."
    I tried this- at least to the part about checking the IP address under WAN. I assume you mean the WAN page in the modem setup- nothing looked any different after trying what you suggested, and I'm not really sure where I would be "getting IP in public range" or what that means.
    I'm about to give up and just buy a new router to see if I can get the same lack of results with a different one. My ISP maintains that everything is set up correctly on their end and really can't do anything more for me. The Modem works and is set up correctly and they can give tech support for a router.
    Here's what my basic setup looks like now:
    http://i490.photobucket.com/albums/rr270/SukarUDL/BasicSetup.png
    Here's what the advanced tab looks like now:
    http://i490.photobucket.com/albums/rr270/SukarUDL/AdvancedRouting.png
    Modem setup looks the same
    Message Edited by Writersbloc on 09-25-2008 07:05 PM

  • I downloaded iTunes 10.4 last night and now I can't get access to the iTunes store

    I downloaded the latest version of iTunes last night (10.4) and now the iTunes store won't load. 

    You will have to remove all Apple programs associated with iTunes:
    i iTunes, QuickTime, Safari, Apple Software Update, Apple Mobile Device Support, Bonjour and Apple Application Support (iTunes 9 or later)
    Make sure everything that is by Apple is removed including Safari. You can sort by "Publisher", when you uninstall programs. Make sure you have at least one other web browser (like Firefox or Internet Explorer) before removing Safari. That way you can go back to the Apple web site and redownload iTunes later.
    Reboot the computer then reinstall iTunes. Everything should work normally.

  • HT1386 downloaded the latest update on itunes and now I can't sync my outlook calendar or contacts from my PC either manually or by icloud. Does anyone have a solution?         Does anyone have a solution

    I downloaded the latest itune version and now my outlook calendar and contacts won't sync either through my PC or by icloud. Has anyone else had this problem and know how to solve it.

    I downloaded the latest itune version and now my outlook calendar and contacts won't sync either through my PC or by icloud. Has anyone else had this problem and know how to solve it.

  • I recently downloaded the latest version of SnowLeopard and now I can't open any pdf files. Has anyone else had this problem?

    I recently downloaded the most recent version of snow leopard to my imac. Now I can't open any pdf files. I just get a dark gray screen when I try to pull one up. Has anyone else had this problem? Please advise.

    See TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5.
    tt2

  • HT5037 Can someone please help me recover my pictures from iPhoto?  I upgraded to the newest version of iPhoto and now I can't get to my pictures.  I even downloaded the upgraded but I don't know what to do next.

    I recently upgraded to the newest version of iPhoto.  I used to have version 7, I believe.  Now that I have updated I can no longer see my pictures.  I downloaded the upgrader but I don't know what to do next.  Please help!

    Go to your Applications/ Utilities folder. Finder the upgrader app. Double click it to run it.

  • I downloaded software updates and now I can't get online with airport

    Hello!
    This morning, I got asked by my software update on my Mac (which automatically asks me every week) to install some software updates. I stupidly did not think much about it and clicked ok.
    The software updates that I installed were:
    1.) Java for Mac OS X 10.3, Update 5 version 5.0
    2.) Quicktime version 7.1.6
    3.) Security Update 2007-005 version 1.0
    4.) Security Update 2007-006 version 1.0
    Now I cannot connect to the airport. Everyone else around me is fine. The airport icon in the top right corner shows 4 bars. When I go into Network Status, it says that the AirPort is turned on but is not connected to the internet with a yellow dot next to it.
    I went into keychain access and under access control, I noticed that the box was checked next to "confirm before allowing access". However, whenever I try to connect to the internet either via Firefox or Safari, there is no pop up that asks me to confirm. Also, I tried to change the settings in Keychain Access, I changed the setting to "Allow all applications to access this item" and when I click save changes, I get the color wheel of death and the program is listed as not responding.
    When I try to enter the WEP 40/128-bit hex password, it either says the computer cannot connect to this network or I get the spinning color wheel and nothing happens and I have to restart the computer.
    Does anyone have any suggestions? Perhaps I can uninstall whatever I installed or I need to reconfigure the IP address (I have no idea how to do this)
    Thank you so much for your help!! It is much appreciated.

    First, try repairing permissions. It's often recommended to be done both before AND after installing software updates.
    Find Disk Utilities in the Utilities folder (on the Applications folder). Launch it and, in the left-hand pane, single-click your boot volume (if you have multiple volumes/drives/partitions on you hard drive). A "Repair Permissions" button is under the main window. Click it and let the program work.
    If that doesn't work, post back.
    A

  • The techs wiped my computer and now I can not get iPhoto it tells me my computer can not accept this application. How do I get iPhoto so I can transfer my backed up photos

    How do I get Iphoto. After resetting up my computer and trying ot manually transfer my iphoto library the app store says I can not accept this application on this computer. How can I get it back?

    Contact the Techs and get them to sort out this account issue.
    Regards
    TD

  • I was setting up the ipod 4th gen that I got my daughter for Christmas, and set the itunes store to restricted, and now I can't get on to add anything. How do i fix this?

    Also, do the 4th gens have cameras? I see it in the manual, but there's no app or whatever to access it, and I accidentally 'synched' photos from my computer, and can't get them off! Help!

    We are going through same thing and looks like alot of other people also. Seems to me Apple would have invalid email instead of us loosing the gift card all together. Very irratating. Good Luck.

Maybe you are looking for