I downloaded the itunes update today and now my itunes won't work at all. It keeps saying I don't have MSVCR80.dll installed and to reinstall itunes. I have tried to reinstall it 3x and still same problem. Now I can access anything on my itunes. Help!
It keeps sating that MSVCR80.dll did not install correctly and to try installing Itunes again. I have tried installing 3x and still same thing. I cannot access any of my music, podcast or books on itunes, it won't open. What can I do?
You need to restore your iPad using recovery mode and the process is covered in this article.
iPad: Unable to update or restore.
http://support.apple.com/kb/ht4097
Similar Messages
-
I downloaded the latest update yesterday and now itunes is gone from my toshiba laptop. I get a message msvcr80.dll. Any suggestions why
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I have updated my billing information and still can't update my existing apps , i ahve changed the payment card and still same problem ,what shall i do ?
It's a credit card, not a debit card ? As far as I know that message will show if you are trying to use a card that was not issued by a bank in the same country as where your iTunes account is based (and you need to be in that country). If you are sure that it is then you could try contacting iTunes Support and see if they can help : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
Ipod Touch 1st generation: blank white screen - I tried holding both buttons and connecting it to the computer, restoring it, and still nothing. What else can I do? I did not drop it in water.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Only one song won't play after authorizing my computer. I authorized it over and over. I even deauthorized all computers, and still same results. How can I fix this ? I'm using a MacBook Pro with iTunes 11
Hi Deb,
Deauthorizing all is definitely the way to go. You will just need to authorize your computer again after, as well as your husband's.
Here's some additional information on deauthorizing all:
iTunes Store: About authorization and deauthorization
http://support.apple.com/kb/ht1420
I hope this helps!
- Ari -
I have an ipad and iphone sharing icloud. The ipad is using 268mb, the iphone 2.6. My plan is 5gb but it keeps saying I don't have enough space to back them up. How is this possible?
Hey sameyrs2,
Thanks for the question. Based on what you stated, it seems like you are getting a message when trying to backup to iCloud. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
iCloud: Understanding Backup alert messages
Manage your iCloud storage
Thanks for using Apple Support Communities.
Cheers,
Mario -
I have a MacBook Pro 13 early 2011 with Mac Os 10.7.5. I can't make an update because it keeps saying I don't have permissions. What can I do to update?
Are you the admin?
-
After downloading the new update for my iphone 4 the screen only show an itune logo, as
well as a plug in picture, thats it. No icons are visible, phone does not come on except to show
the two icons. When I power up it does nothing except shows those 2. When power off I dont even
get the slide off screen it just goes black. WTH?Hello bigboza,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
Have a nice day,
Mario -
After downloading the latest update for my Ipod touch, my playlists now go into "shuffle" mode everytime I try to play. I have turned off shuffle on both itunes and my ipod and even tried recreating the playlist and syncing with no luck. I don't know what is causing this, because before the last download, it never happened. Any ideas on how to fix?
Since this is an XP machine, which version of iTunes do you have installed? Is it the latest version?
Have you tried starting iTunes, attach the USB end of the cable, then while holding the home button on the iPod connect the 30-pin connector end of the cable to the iPod...that is the recovery mode but also should make iTunes see the iPod.
If that doesn't work you may need to take the iPod back and have it tested by the genius bar techs to make sure the connector is not bad. -
Why does itunes keep saying I don't have enough memory on my windows 8.1
When I am trying to download new songs, import a CD or trying to watch a TV segment on I tunes on my Samsung Laptop computer for Windows 8.1 and I keep getting messages saying I don't have enough memory and I also keep receiving messages that I'm not connected to the internet when I am. I have unplugged and replugged my connection but it keeps happening, I have checked for updates but don't need to, and have tried to troubleshoot it. When I went on line I kept being told this is an apple or i tunes problem. Please help
Do you back up to iCloud? I'm assuming so since you asked about purchasing more storage.
Check Settings > General > Usage on your iPhone and see if you really need everything you're keeping there. -
I updated my Macbook Pro to Yosemite this morning, (it took almost 2 hours!), and now iPhoto tells me it's incompatable with Yosemite and I need to download the latest version. I've done that 3 times now and restarted twice, (just in case) and I still get the same message, incompatable...download the latest version of iPhoto.
Frustrating as ****!The "latest" version is a bit ambiguous. The App Store may be only showing you the latest version you bought, not the most recent version.
Which version did you download?
You need to install iPhoto 9.6 and launch this version. If you previously have been running a version of iPhoto 8.x.x., you cannot update, but need to buy the upgrade to iPhoto 9.6 from the "Featured" tab of the App Store..
Then launch iPhoto from the Applications folder. The Dock icon may still be tied to the older version.
Also, depending on the version you upgraded from, you may need to run the iPhoto Library Upgrader, if your iPhoto Library has been created by iPhoto 7.1.2 or earlier, see this link: iPhoto '11: About the Library Upgrader -
I cannot launch i tunes on my pc however others can on same pc under their own login. i uninstalled and reinstalled but erro message is still there - it reads the itunes library extras.itdb file is locked, on a locked disk or you do not have permission for this file.
Hello daglez,
Thank you for using Apple Support Communities.
For more information, take a look at:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Have a nice day,
Mario -
Just downloaded the 3 updates today... and now i can't view streaming files
updated... now anytime i want to view a video on youtube or google, or anywahere else i get the little quicktime symbol with the "?"...
i made sure quicktime was set for streaming files on the web... i made sure i had macromedia flash player... i then downloaded it and re-downloaded it AGAIN... still the little quicktime symbol with the "?"
i know the answer is sitting right in front of me, and i feel like an idiot... can someone please help me?Adjusting my MIME settings in QuickTime did nothing to solve my problem with streaming Flash video in Safari, but here's what did...
1.) I went to Users/HomeFolder/Library and moved the Preference folder to my Desktop.
2.) Next, I launched Safari and confirmed that the problem went away in the absence of my bloated Preference folder (a new Preference folder was created on the fly).
3.) After removing the contents of the new Preference folder, I started moving my old preferences into the new Preference folder alphabetically in groups. After each new group was added, I launched Safari to see if the problem returned. As I added back prefs, I replaced any newer prefs [newly created because I tested Safari] with my older prefs. The problem returned when I got to the C's. I pulled the C's back out of the new Preferences folder. Again, the problem went away.
4.) After putting all the C's, ten at a time, back into the new Preferences folder, the problem failed to return. However, when I put the remaining old prefs in the new Prefereces folder, the problem returned. Upon taking every thing after C back out, the problem went away again.
5.) Finally, after putting all the old prefs after C into the new Preferences folder (this time in groups of ten to twenty), the problem failed to return.
I realize this is not a complete answer as it never identified the culprit or culprits specifically. Perhaps its a matter of order. All I know is my problem is solved and I did not have to trash ALL my prefereces to do it.
Good Luck
MacBook Pro Mac OS X (10.4.6)
MacBook Pro Mac OS X (10.4.6) -
It was working just fine before I downloaded the update.
Version 11.1.5.5 of iTunes was just released today. If you update to that, does that help with the recognition troubles?
http://www.apple.com/itunes/download/ -
I can not download the latest 'free upgrade' for Flash Player. I click on the link, it shows the download option agree, T's & C's, click 'next' it seems to download ok but nothing happens and I have tried at least a dozen times
This morning we resolved a problem that prevented Flash Player installations from completing for some of our Macintosh users.
If you encountered this problem, please delete any previously downloaded Flash Player installer and either:
1.) Download the installer again from https://get.adobe.com/flashplayer
2.) Download the stand-alone installer from http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
Maybe you are looking for
-
Billing posting for intercompany delivery process
Hi all we configured a new process for intercompany billing to use a standard PO for delivery between a warehouse and a store both in different co codes. Process is based on vendor and customer defined in retail sites both WH and store. Eg. WH site c
-
Copy Control From Contract to Sales Order
Dear All, I have created a Quantity Contract of 100 Target qty. I have created a Sales order with reference to the contract of 20 Order quantity and delivered 21 Delivered quantity. When I create another Order with reference to the Quantity Contract
-
Horizontal Line & Non-Horizontal line...
I tried to fix the Horizontal Line and Non-Horizontal line because it is not work. I put the public void paint(graphic g) then I already put the rectangle -> g.drawrect(100,100,300,250) 2) Horizontal Line: y-coordinate is 300 --> g.drawline(0,0,0,300
-
Hello, I have to perform a kind of "SELECT FOR UPDATE" in a database transaction. My DBMS is SQLServer. I think the best approach is to use the createStatement(ResultSet.TYPE_FORWARD_ONLY, ResultSet.CONCUR_UPDATABLE) sentence, as this should properly
-
Row action event on data table does not occur when rows added dynamically
Row action event on data table does not occur (only refreshes the page) when the rows in the data table are added dynamically at run time using button click and java bean. please tell me a way to catch the row click event when adding rows dynamically