I downloaded the latest version of itunes and now my ipod nano won't sync.  The sync process appears to be locked up on the 2nd song and will not continue to sync.  I unchecked the 2nd song so a different song would be 2nd, no benefit; reset my ipod nano;

I downloaded the latest version of itunes and now my ipod nano won't sync.  The sync process appears to lock up on the 2nd song and will not continue to sync. I let it run all night the first time and it never went past the 2nd song.  I unchecked the 2nd song so a different song would be 2nd, no benefit; reset my ipod nano; shut down laptop and restarted a different time; shorted the number of songs to sync; all without benefit. 

When you connect your ipod up to the computer. It should show the device, usually with the name of the device, in my case 'jordan's ipod'. This should be on the row which shows 'songs', 'albums' e.t.c on the far right. There when you click on it it should go to a different screen showing a picture of your ipod along with two buttons - Update and Restore. Click update and it should take a 2 mins while your ipod is updated to the latest version of Ios.
After updating te ipod see if there is a change in results.
PS: make sure the device is active while syncing so keep tapping the screen.
Sorry for any incorrect info, i have an ipod touch, but i've had experience with an ipod

Similar Messages

  • HT1386 I did a system restore on my computer.  When I had it up and running I downloaded the latest version of itunes.  Now I can't sync any new apps to my ipods.  What may be the problem?

    I did a system restore on my computer.  When I had it up and running again, I downloaded the latest version of itunes.  Now I can't sync apps to my sons ipod.  What can I do to fix this?

    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar and Control+B to show the Menu bar
    To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device>Set up Syncing and follow the instructions.

  • HT1386 Just downloaded the newest version of Itunes.  Now my Iphone 4s won't sync with Outlook calendar.  Has any one else seen this?

    Just downloaded the newest version of Itunes.  Now my Iphone 4s won't sync with Calendar in XP Outlook.  Has anyone else had this problem, and how did you fix it?  I've already made sure the proper check boxes are on in Itunes and tried the reset sync history.  Also re-downloaded Itunes again.  Same problem.

    Well, OSX 10.9.2 is free, which should solve the iTunes problem, but 10.9.2 isn't bug free, & you'll lose the ability to run any PPC Apps if that important, as well as needing to update many Apps & Printer Drivers.

  • I just downloaded the latest version of iTunes. Now, my iPad will not sync. I get a message saying: "This ipad cannot be used because the Apple Mobile Device is not started." What do I do?

    I just downloaded the latest version of iTunes. Now my iPad will not sync. I get the message: "This iPad cannot be used because the Apple Mobile Device is not started." What do I do?

    Type "apple mobile device service" into the search bar at the top of this page by "Support" and read the resulting help articles.

  • I have a new computer and downloaded the latest version of itunes.I now need to authorise my computer but cannot find the bar that contains " store windows help" any suggestions please?

    i have a new computer and downloaded the latest version of itunes.I now need to authorise my computer but cannot find the bar that contains " store windows help" any suggestions please?

    Press Alt or Ctrl+B.
    tt2

  • Once I updated to the latest version of iTunes, I now cannot get all my apps to update. Then syncing up. Poor way of doing business with little help.

    Once I updated to the latest version of iTunes, I now cannot get all my apps to update. Then syncing up. Poor way of doing business with little help. Need help?????

    Many thanks b Noir
    This is a copy of ONEof the keys  in the registry I changed  as told by Apple support today. I also have changed others as instructed by GEAR  software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others  they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so  I downloaded the software and installed again.
    Sorry, just this minute went to insert image  and it is giving me a message saying this sort of content  is not allowed?.
    The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr  SiRem GEARAspiWDN.
    The GEARsoftware info about manually deleting  GEAR drive is from:
    http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
    I hope you can help

  • I have updated to the latest version of itunes but now i cannot see what i have on my ipod

    i have update to the latest version of itunes but now i cannot see whats on my ipod

    Hi murr18140,
    Welcome to the Support Communities!  The article below will help you troubleshoot the issue you are having with your iPod classic not being recognized in iTunes for Windows:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363?viewlocale=en_US
    I hope this information helps ....
    - Judy

  • HT1535 I just downloaded the latest version of iTunes. Now I am unable to purchase songs on iTunes and I can't sync my iPhone to my computer. Is there a way to revert ot the old version of iTunes (when I had neither of those two problems)?

    I just downloaded the latest version of iTunes (11.0.4). Now I both unable to make purchases on iTunes and unable to sync my iPhone with my computer without restoring it to factory settings (which will erase my data). Is there someway to revert back to 11.0.3 version of iTunes?

    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar and Control+B to show the Menu bar
    To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device>Set up Syncing and follow the instructions.

  • I just bought a nano and am trying to sync to itune on my mac.  It tells me I need the latest version of itune.  when I try to donwload this it tells me I need a new OS.  I have updated both and my nano still will not sync.  Any suggestions?

    I just bought a nano and am trying to sync to itune on my mac.  It tells me I need the latest version of itune.  When I try to download this it tells me I need a new OS.  I have updated both and my nano still will not sync.  Any suggestions?

    Numbers documents from iOS need Numbers 3.2 on a Mac to open. And Numbers 3.2 requires Mavericks. If you are using Mavericks you can get Numbers 3.2 from the Mac App Store. It will be free IF you have Numbers 2 (iWork '09) installed. Otherwise you must buy it.
    Your other option is to send the Numbers file as an Excel file via e-mail to yourself to open with an earlier version of Numbers.

  • HT1926 I tried to download the latest version of iTunes but now seem to have lost everything and can not access my library at all. Instead i keep on receiving the message 'Application has failed to start because MSVCR80.dll was not found. I cannot access

    I tried to download the latest version of iTunes but failed half way through. It suggested that i reinstall we I tried. However, i now get this message which states "Application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem"
    I have tried this but with no success. I have therefore found that I cannot access my iTunes library at all now.
    What should I do.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99792)

  • HT1296 i just downloaded the latest version of itunes but now i cant zync my ipod. i tunes does not detect my ipod. ut just to work perfectly with the older version of itunes but not now. what is something i can do?

    i just downloaded the latest version of itunes but i cant zync my iphone nor my ipod. it just to work perfectly with the older version of itunes  but now itunes does not detect my ipod nor iphone. i have a windows pd and iwindows detects the iphone and ipod. what is something i can do to fix the problem??

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests

  • I downloaded the latest version of itunes.  Now I cannot open iTunes.  I receive this error message: The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll.  Thoughts?

    I downloaded the latest version of iTunes on my PC.  Now I cannot open iTunes.  I receive the following error message: "The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll"  After pressing the "OK" button I receive a second error message: 'iTunes not installed correctly.  Please reinstall iTunes.  Error 7 (Windows error 127)".  I've uninstalled iTunes and reinstalled to no avail.  I've also eliminated the temp files (per suggestions on the trouble-shooting page) and no luck.  I also tried system restore and that did not fix the problem.  Any thougths on a repair?   

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more.  Itunes starts but before anything loads a

  • HT1349 I installed the latest version of iTunes.  Now I cannot find FM radio stations.

    Before I installed the latest version of iTunes I had hundreds of FM radio stations to choose from in every genre of music.  Now the Radio tab takes me to 7 or 8 albums.  I searched for FM radio stations, but just got more albums that cost to listen to.  Some are free, but I am interested in listening to radio stations.  How can I get back the list of radio stations?
    I do not have any Apple hardware, iPad, SmartPhone etc.  I just have a windows desktop computer (Pentium 4).  Although I have an Apple ID and password I am not sure what Apple is or how it functions.
    I downloaded a lot of classical music in my ITunes library, but opening them does not help in bringing up FM radio stations. Can you please tell how to find the FM radio stations?
    Thank you very much,
    Best,
    Thomas

    Hi findmeat,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    About iTunes Radio
    http://support.apple.com/kb/HT5848
    Cheers,
    - Judy

  • Just updated to the latest version of iTunes.  Now my CD drive is can't read CDs.

    Just updated to the most recent version of iTunes.  Now my CD reader won't recognize any CDs or games I put in.
    There is no error message, I hear the reader booting up but I get no box asking my to import files,play ect.
    CDs don't appear on the drive in 'My Computer'
    Tested the same CDs on another computer and they were recognized
    CDs are commercial and from the library

    Try HT203242: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install (Formerly TS2308).
    tt2

  • TS3274 After updating to the latest version of itunes I now have no audio .  The volume button is all the way up and it says "headphones".  I never saw that before and can't find where to change it.

    I updated to itunes 7.02 yesterday and now I have no audio.  The side switch says mute or headphones.  How do I listen to anything without headphones?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
     Cheers, Tom

  • Just upgraded to the latest version of iTunes. Now I get the message "the Item you requested is not currently available in the US store." When I click on OK, the dialgue goes away, but the store doesn't open. How do I fix this?

    Not sure why I am getting this message anyway. I wasn't trying to buy anything. I just upgraded and then I tried to access the store. I had two purchases that I had previously made from a different computer. I was going to download them to this computer as my iPod is synced to this computer and you can only sync it to one computer. I was able to view my account information and from there I was able to click on the Purchased link. I saw the two items and downloaded them. But I received an error about the second album. It said that I didn't have sufficient privileges. When I checked all the songs had downloaded. Only the booklet was missing. Maybe this has something to do with the issue, I don't know. As far as I know, I purchased everything from the US store. I don't even know how to switch to a different store.
    In any case, I can't access the store because the item I requested is not currently available in the US store. So why don't they just dump me at the home page instead of blocking me completely.

    It is working now. I no longer get the message about the item not being available in the US and I can access the store.

Maybe you are looking for

  • Printing problem for elements 10

    I just bought a new computer with windows 8..My old computer was windows XP..I insteed  my Elements 10 in windows 8.Every thing works fine except the printing process.Can not change paper size. paper type color management etc..Worked fine in XP. Is t

  • What are the Scope Fields for in PageContext??

    There are 4 fields in javax.servlet.jsp.PageContext, what is there functionality and purpose?

  • Can we create a Calender through abap in hr module

    Dear Freinds             could any body let me know can we create a Calender  through abap . my requirement is user is asking me to create a calnder .....and give me him a tcode..........when we click on the calnder for him a rport should be displaye

  • How to go to EndPoint

    Hi All, Please let me know how to go to display end point in XI from SAP Logon. I have to change old URL with new URL. Not sure for change URLs at EndPoint. Is it correct way or not. Please correct me if am wrong. Thanks, Subbu.

  • Empty Locked Folder Appears?

    I have two empty folders that just showed up in my Finder. According to "Get Info" they appeared yesterday. When I try to delete them it asks for my password, which I haven't typed in. One folder is called "update" and the other is "verify_dir". What