I downloaded the new maverick and now i can't open iPhoto and can't install the new version. Help?

Iphoto has a circle with line through it. its iPhoto 9.2.3. I go to the app store and try and download the new version and i get these windows. if someone can help that would be great. also i had problems installing maverick I'm backing up my hard drive and going to try and reinstall maverick but i dont know what else to do i have all my daughters baby photos on there. is there anyway i can transfer my library to a different app and open it that way???

The error message means, that a different AppleID has been used to buy iPhoto '11 or to accept it to the AppleID, when the Mac first has been set up.
If you are now using a different AppleID then the one you used, when you set up your Mac, launch the App Store and sing into the AppStore with  the old AppleID (in the "Store" menu).
If your Mac has been set up by someone else, ask this person to sign into the AppStore and update iPhoto for you. If you bought the Mac second hand  and cannot contact the previous owner, delete iPhoto from the Applications folder and buy it using your AppleID.
If none of this applies, and you bought the Mac as new, and never used a different AppleID, contact the store that sold you the Mac. They may have sold you a refurbished Mac, with the iLife apps still tied to a different AppleID.

Similar Messages

  • HT203175 I tried to update my Itunes to the news version and now it will not open it says it was installed incorrectly I need to know what to do so I don't lose all my music

    I tried to update my Itunes to the news version and now it will not open it says it was installed incorrectly I need to know what to do so I don't lose all my music

    try with this one
    uninstall all the apple application S/w like Quicktime, Bonjour,
    apple Device Support, Apple Auto update, Itunes etc from your pc,
    Reboot it
    Now download a fresh itunes from apple and try installing
    Reboot it
    If you are having Problem in uninstalling any of the apple application
    try 'revo uninstaller' and uninstall all the apple applications
    mentioned above

  • HT201364 I upgraded my MacBook Pro with Lion (but with iphoto 9.2.1) to Maverick and now I can't open iphoto and I can't update either

    I upgraded my MacBook Pro with Lion (but with iphoto 9.2.1) to Maverick and now I can't open iphoto and I can't update either - can anyone help please?

    Download the iPhoto upgrade from the App Store. It should be free.
    iWork and iLife for Mac come free with every new Mac purchase. Existing users running Mavericks can update their apps for free from the Mac App Store℠. iWork and iLife for iOS are available for free from the App Store℠ for any new device running iOS 7, and are also available as free updates for existing users. GarageBand for Mac and iOS are free for all OS X Mavericks and iOS 7 users. Additional GarageBand instruments and sounds are available for a one-time in-app purchase of $4.99 for each platform.

  • HT4710 when i try to go into iphoto i get a message To examine and repair permissions, quit iPhoto. Press the Command and Option keys while you open iPhoto, and select "Examine and repair iPhoto Library file permissions."

    in iphoto i get the shreen with just thr download circle and nothing happens. i click on on edit and get "
    To examine and repair permissions, quit iPhoto. Press the Command and Option keys while you open iPhoto, and select “Examine and repair iPhoto Library file permissions.“
    it still does not work

    Have you tried doing what it says?
    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • My CS6 Indesign has quit several times and now won't even open anymore, how can I get it to work?

    My CS6 Indesign has quit several times and now won't even open anymore, how can I get it to work again? I need it back asap!!

    Start by emptying the InDesign Recovery folder.

  • I can not open iphoto and itune anymore

    anyone knows why i can not open iphoto and itune anymore/

    I have rerun the applications install dvd, but it has not corrected the fault. When I try to open iphoto's I have an error message that says You can’t open your current photo library using this version of iPhoto.
    Peter,
    the version you installed from the DVD is probably older than the version you used last with your library, so you need to update to the last version you used.
    I have tried to update to the latest iphoto 11 but it wont download. Any answers please.
    Where are you trying to download from? When you upgrade a version that is installed from the DVD, you need to update from the Software Update menu entry in the Apple-menu.
    Also, iPhoto has to be called simply "iPhoto", not iPhoto '11 or something similar and to be installed in the Applications folder. Otherwise it will not be recognised by the updater.
    Regards
    Léonie

  • I reformatted my computer and now I do not have iphoto, how can I download it again?

    I have a partition and my mac side stopped working, I reformatted it and re-downloaded lion the newest operating system although my laptop came with the operating system prior to this and now I do not have iphoto. How can I get it again without paying for it, since the computer originally came with it?

    Log into the Mac App Store with an Apple ID used to purchase it or the one you associated with those applications and click on the Purchases tab.
    If you originally got it on an iLife DVD or are using the version included with a Mac which originally shipped with 10.6.8 or earlier, you need to reload it from DVD.
    (72873)

  • I can not open iPhoto, it said it on the lock disc, when i update to mard

    how can i open iphoto when it said on lock disc?

    What version of iPhoto? of the OS? where is your iPhoto library located? Have you looked at the "more like this list" on the right? One of the posts there like this one might help - https://discussions.apple.com/message/23891920#23891920
    LN

  • Downloaded Mavericks and now not able to open iPhoto

    Downloaded Mavericks and now why am I not able to open iphoto?

    tipsam wrote:
    Not obvious enough.  Why separate the two??  Oh well, it's done, and I'm happy.
    I take your point. Mail.app is in the Applications folder alongside iphoto.app, however some are in the OS and some are not.   What I meant was it should be obvious that after an upgrade you either wait for the update notices, or run Software Update after an OS upgrade, not before. Taking a Time Machine backup before upgrading the OS is also essential but missed by many.
    You can leave the suggestion at http://www.apple.com/feedback/macosx.html  to include reminders in the How to Upgrade and during an upgrade. Apple will not reply but will take notice.

  • So I updated the itunes and now it won't open it, it states a message "the itunes library.itl" cannot be open because it was created by a newer version of itunes, I have unistalled and re-installed newer and older version and still i get this message.

    I updated and now i can't use the itunes. I have unistalled several times, installing newer and older versions but still i get this message. Is there anything i can do to fix this problem??

    Try the following user tip with that one:
    Empty/corrupt iTunes library after upgrade/crash

  • I had just updated the facebook app for my ipod touch and now it wont even open, i have tried to restart the ipod and to re download the app several times any help? thanks

    i just updated the facebook app for my ipod touch and now it wont open and i tried restarting the ipod and also re downloading the app several times and nothing.. any help? thanks!

    jflight007 wrote:
    but some of my music was no purchased from itunes so that will all be lost though right?
    ALL of your music should be on your computer in itunes.  Is it not?
    How did it get on your ipod in the first place if not from your comptuer?
    Everything on your ipod should be on your computer and you should be syncing regularly.

  • TS1567 I updated my iphone 4s os and now it wont synch with itunes. I have installed the latest version of itunes on my pc and have tried restarting the apple mobile device but it is still not working Any suggestions?

    I updated my iphone 4s and now it wont sych with my itunes. It goes through the process and says sych comlete but then nothing is updated on my phone. I have tried restarting everything and restarted the apple mobile device but nothing seems to work. Please help!!!!
    Claire

    Did "everything" include this: http://support.apple.com/kb/HT1808 and this: http://support.apple.com/kb/TS1275, which says:
    Error 23, 28, 29, 40, 1002, 1011, 1012, 1014, 1611: These errors may indicate a hardware issue with your device.  Follow the steps in this article and also attempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device.  If the MAC address is missing or the IMEI is the default value (00 499901 064000 0), this can also confirm a hardware issue.

  • I upgraded my OS in my Mac and now I cab't open iTunes. Error message says the iTunes library is locked, in a locked disk or I don't have permission to write.

    I upgraded my OS from Lion to Mountain Lion. After that I can't access or open Itunes anymore. Message says " Itunes library is locked, in a locked disc or I don't have permission to write permission for this file.

    Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • I erased my system and now I get my system cannot be verified to install the software.

    I was restoring my macbook pro to factory settings and now I am getting a message my machine cannot be verified and will not let me put the software back on.

    What software? ILife?
    Clinton

  • Quicktime for Windows -- on Vista -- opens a .mov movie once, then won't open the move and Quicktime won't even open itself.  I've installed the latest version, and upgraded it to Plus as well.

    I am having trouble opening .mov videos with Quicktime on my PC with Vista.  I installed the latest version of Quicktime for Windows (V.7.7), and upgraded it to Pro.  It will open a .mov file once, then after that it will not open any .mov file and in fact, when I try to open the Quicktime player it will not open itself.  If I switch users to Admin, it all works fine, but when I go back to my regular role (where all of my preferences and programs are there for me to use), the same thing happens.  An .mov file will open once, then never again, and the Quicktime player seems to be disabled.
    I've tried different .mov files, so it's not a corrupt file that's the problem.  And, in the past (a couple of Quicktime versions ago, I guess), all of this worked just fine.
    Any helpful suggestions would be appreciated!

    I have the exact same problem. They play on my Mac under Snow Leopard. Transfer to Vista gets a window with black and white and some other noise. No sound either.

Maybe you are looking for

  • Sender Mail Adapter - S/MIME - How to use it?

    Hi guys, I am trying to figure out how to use the S/MIME security parameter of the Sender Mail Adapter in PI 7.1. Could anyone point me to some useful documentation/examples/blogs ? Or perhaps explain what steps are involved when configuring this par

  • Audio output advice request

    Hello, Hoping someone can help guide me on the most efficent way to deal with the following scenario. I have a late 2008 alum macbook that I am using as my primary home computer. I have a toslink optical out to my DTS decoder stereo receiver so that

  • My macbook wont detect that i plugged anything in the USB

    its not detecting my printer when it was every other day....help!!

  • Problem with master loads

    Hi all, While troubleshooting a load failure for a country, we were looking for the master files in UNIX for that country. But when we look in the directory for the country's master file in UNIX, we see the CSV file, but no files for the attributes.

  • OracleBulkCopy WritetoServer does Select * from TableName , fix it please

    In Odp.Net latest version , whenever OracleBulkCopy.WritetoServer is called. It internally calls "Select * from TableName " to validate the table schema. I did some debugging and found that this is called in function GetMetaData() in OracleBulkCopy c