I downloaded the newest version and there is a Circle with a slash through it over the firefox icon. When I click on it the message is the system does not support this version. How do I reinstall the previous version?

I updated firefox. When I did there was a circle with a slash (as in No!) across the firefox icon. I clicked on it to open the browser and the error message reads: the application firefox cannot be launched - 10661
How do I go to the previous version that worked just fine?

Firefox 3.6.x is the last available from Mozilla for PPC Macs. <br />
http://www.mozilla.com/en-US/firefox/all-older.html
For older Macs that aren't supported in Firefox 4+ versions, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
http://www.floodgap.com/software/tenfourfox/<br />
http://tenfourfox.blogspot.com/ <br />
https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported

Similar Messages

  • I want to use icloud on my macbook and cant because I am using OSX10.6.8 - I want to upgrade this but I cant upgrade to mountain lion as my mac does not support this - cannot find a way to go to Version 10.7.4 which i understand supports icloud - help

    want to use icloud on my macbook and cant because I am using OSX10.6.8 - I want to upgrade this but I cant upgrade to mountain lion as my mac does not support this - cannot find a way to go to Version 10.7.4 which i understand supports icloud - help to do this please

    If you purchased Lion for your iMac, just log into the Mac App Store from your MacBook using the Apple ID under which you purchased Lion and go to the Purchases page. You will be able to download and install Lion there. 
    searching the internet i found a link to upgrtade to 10.7
    The only place you get get Lion is from the Mac App Store. If you found some other site, that was an illegal copy and almost certainly tied to someone else's Apple ID and hence unusable by you. If the link was just to the Mac App Store, see above.
    As to the problem with synchronization to iCloud, that's not a 10.6 question, so I'd suggest you take up that specific issue in either the Lion or iCloud forums, providing full details, and someone there can probably help you sort things out.
    Regards.

  • Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system? If version 6.5 does not support this configurat​ion, do any of the later versions support it?

    Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system? 
    If version 6.5 does not support this configuration, do any of the later versions support it?
    I have an Ada executable that's creating a buffer of data that's being fed to a Labview executable that's displaying the data in a GUI.  We're re-architecting some legacy system hardware and I'm just trying to figure out if this configuration is even possible.
    Thanks

    Hi,
    I never heard of LabVIEW6.5. I only know of LV6i, LV6.1 and LV7.0...
    Why don't you just call your next/regional NI sales rep?
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • I keep getting this error message "Your operating system does not support the 64-bit version of Silverlight" even though I have a 64 bit system?

    Netflix requires Microsoft Silverlight plug in to view their videos. Every time I try to load it I get the following error message...Your operating system does not support the 64-bit version of Silverlight. I have a 64bit system with Windows Vista Home Premium. Firefox 33.0 is installed.
    Any suggestions?

    Your User Agent: Mozilla/5.0 (Windows NT 6.0; '''WOW64'''; rv:33.0) Gecko/20100101 Firefox/33.0
    As said Firefox for Windows from mozilla.org is a 32-bit application. The WOW64 in UA means it is a 32-bit application on 64-bit Windows.
    Before you ask if there will be a Win64 version of Firefox. If all goes well the first phase of having Win64 for Release may be as early as Firefox 37.0
    https://wiki.mozilla.org/Firefox/win64

  • I would like to display my bookmarks permanently. Clicking on Firefox, Options and then checking the Bookmarks Toolbar does not do this. How can I display the bookmarks along the left margin like they used to display?

    I would like to display my bookmarks. Clicking on Firefox, then Options and then checking off the Bookmarks Toolbar does not do this.
    What do I have to do to permanently display my bookmarks?

    I asked how I could display my bookmarks permanently.
    This answer does not address that issue. Instead, it tells me how I can display my bookmarks temporarily.
    While this is nice to know, I wanted to find out how to display my bookmarks permanently - not temporarily.

  • We have mac os X 10.5.8 we tried to upgrade with the new firefox 4. it removed our old firefox and replaced it with firefox 4. Now we get a message that our system does not support the new firefox. All our bookmarks settings are gone. Please advise.

    When we tried to open firefox 4, all previous settings and bookmarks were gone. Firefox 4 gives message that it is not supported by our system. IMAC G5 power PC with 2 gigs of Ram. Is there any way to restore the old firefox?

    Hi everyone,
    Many of you have had problems with Spotify for Mac OS X 10.5. We no longer support Spotify on this operating system which we announced back in November here as a "heads up".
    However, we've noticed that many folks have been updating regardless which should not be the case. Our intention was to let anyone using Mac OS X10.5 continue using a "legacy" version of Spotify. In any case, the folks who were using 10.5 were updated, and in many cases these customers have experienced crashes with the newest version of the application (Spotify version 0.8.8. at the time of writing).
    To make a long story short, we messed up in updating folks who should not have been updated and we're sorry. We plan on fixing the problem of Spotify updating to the latest version for Mac OSX 10.5 users and we're working on it as I write this. If you're a person who has already upgraded and the application is crashing, we're looking into a solution and we hope to have an update shortly.
    Warm regards from your humble community manager,
    Rorey 

  • On my own website vdha.us, I am now getting many words that are purple and when you mouse over them, a new spamming window opens trying to sell something. IE-9 does not do this. How do I turn this off in firefox?

    Sirs,
    The below URL came up immediately when I tried to access our Newfangled website this morning http://vdha.us :
    http://surveyprizecenter.com/survey/claimgift-GT-kw-7b.php?t202kw=Vdha.us&trimmedKeyword=Vdha.us
    I prefer to use Firefox and very seldom use IE-9. but now I might be forced to remove Firefox 4.0.1 and resort to using IE-9 because of this situation.
    I don’t know how spammers can use our website to exploit their spamming, but I can only imagine the complaints I am going to get from our Board of Directors and members about this.
    Can you make them stop, or at least explain how it is that anyone can do this without our permission.
    We have never allowed advertisement on our website and don’t plan on starting now.
    I am now also getting many words that are purple with two lines under them, and when you mouse over them, a new spamming window opens automatically trying to sell something. How do I turn this off?
    I would appreciate any expediency in the return of an answer that you can provide.
    Kindest Regards,
    Dave Broeker
    VDHA Life Member #1797
    VDHA Webmaster & BX Manager
    http://vdha.us

    The "MySearchDial" app needs to be removed in 4 places.
    1) Go to "add / remove programs" in your windows control panel select mysearchdial and remove it.
    2) Open your Firefox browser then click the Firefox tab at the top left and select options. You will need to change the start page settings back to your preferred start page.
    3) Again under the Firefox tab select "add-ons". In the add-ons manager you will need to remove mysearchdial from both "plugins" and "extensions"
    4) In your search bar (top right of address bar" use the drop down menu and select "manage search engines". You can restore your preferred search engine and remove mysearchdial from the menu.
    This should remove all the components of the nuisance hijacker and restore your browser back to your preferred settings. If you are comfortable with a more in depth removal I would also suggest going to your "programs" folder within the "C" drive of your machine and deleting the "MySearchDial" folder altogether. However, only do this AFTER you have uninstalled it from your system and if you are familiar with this type of removal.

  • MSI-Z77-G43A Live Update 6.0.021 The platform does not support this application

    When trying to run Live Update 6.0.021 on MSI-Z77-G43A got message The platform does not support this application
    OS Win 7 64

    the more recent versions of live update have been buggy!
    your not alone with this behaviour as alot of people have the same issue and it looks like a glitch with the program itself! it may be updated again just to fix the issue when MSI get to a solution!

  • When I click safari on my iMac it says my toolbar does not support this. What is the issue?

    My safari won't open. When I click it, the message says the toolbar does not support this. How can I fix safari?

    You installed the Conduit spyware. To remove it, back up all data, then follow these instructions.
    If the instructions don't work, proceed as follows.
    Triple-click the line below on this page to select it:
    ~/Library/Application Support/Conduit
    Copy the selected text to the Clipboard (command-C). From the Finder menu bar, select
    Go ▹ Go to Folder…
    Paste into the box that opens (command-V), then press return. A Finder window should open with a folder named "Conduit" selected. If it does, delete the selected item.
    Repeat with this line:
    /Applications/Toolbars
    Now you're deleting a folder named "Toolbars". You may be prompted for your login password. Next, copy this line:
    /Library
    Select Go to Folder… again and paste. Don't delete the Library folder. Delete only the following items inside it, if they exist.
    Application Support/Conduit
    InputManagers/CTLoader
    LaunchAgents/com.conduit.loader.agent.plist
    ScriptingAdditions/ct_scripting.osax
    Close the Finder windows you opened. Log out and log back in.
    I've seen a report that Conduit may be bundled with a scam "utility" called "MacKeeper." If you installed MacKeeper, you should remove it according to the developer's instructions. It's worthless and causes many problems reported on this site.

  • Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system? If Labview ver 6.5 does not support this configuration, do any of the later versions support it?

    Is it possible to run Labview version 6.5 with PowerPC as the target CPU and VxWorks as the target operating system? 
    If version 6.5 does not support this configuration, do any of the later versions support it?
    I basically have an Ada executable and Labview executable that currently run on a Sun Machine with Solaris as the operating system.  I'm re-architecting the system hardware and will be getting rid of the Sun Machine and Solaris.  I'm don't have any issues with the Ada executable, but I'm not sure what configurations Labview supports.

    duplicate post
    In the future, please don't try to stuff your message in the subject line. Thanks.

  • "The iPod software update server could not be contacted. The Server does not support this version of iTunes." Any thoughts? Also, iPod will not turn or or charge (tried in my laptop, house computer and dock) I have all the lastest updates to my knowledge

    "iPod software update server could not be contacted. The Server does not support this version of iTunes." iPod will not turn on or charge or reset settings. I tried plugging it in my laptop, house computer and docking station to charge and nothing. Also, I have all the latest software updates to my knowledge. This is a classic 8GB iPod, running of Windows 7. Any thoughts/suggestions?

    only thing that seems to work so far is syncing without photos and also check here https://discussions.apple.com/thread/3206849?start=30&tstart=0

  • I accidently deleted Safari and now I can't reinstall because it keeps telling me there is a newer version on my computer.  The issue is my system does not support the newer version.  Does anyone know how I can get around this?

    I accidently deleted Safari and now I can't reinstall because it keeps telling me there is a newer version on my computer.  The issue is my system does not support the newer version.  Does anyone know how I can get around this?

    Apple wanted to charge me 50 bucks jsut to talk to someone! 
    I believe you may be referring to the $49 ASL agreement at AppleCare? That is only when/if you are out of AppleCare Protection.
    Can you get to an AppleStore Genius Bar?
    They may be able to fix this for you. No charge.
    I highly doubt that. There is a $70 charge for troubleshooing software issues, EVEN IF there is AppleCare Warranty on the hardware.
    However, since there is no charge for an appointment at a Bar, go make one, and see what options they give you. Let us know how it goes.

  • How can I reinstall a previous version of muse?

    How can I reinstall a previous version of muse? I tried under Apps in Creative Cloud - previous versions- but there are no previous versions of muse showing up. What can I do? Ever since muse upgraded yesterday it crashes every time I try to publish, preview or save a site...
    Edward

    The last update is horrible:/
    Muse crashes again and again and again. Not possible to work with this version!!!
    Sorry, but we don't have time to try this or try that... The fact is, using version 2014.2 no problems. Suddenly it's impossible to work with.
    Make a version 2014.2 available for download so that we can downgrade. I can't wait until the problems are solved, because we have to change some things very urgently.

  • Error when trying to re-mount a VHDx (the version does not support this version of the file format)

    Hi,
    I have a vhdx on a NAS that I use for server backup. I created the VHDx via disk management, mounted it and assigned drive letter X. I now created a script that gets triggered upon startup via task scheduler to remount the VHD. If I try to mount it however,
    it tells me this:
    No matter what I try, I can't mount it. Double clicking just says this:
    Eventviewer spits out error 137: The default transaction resource manager on volume X: encountered a non-retryable error and could not start.  The data contains the error code.
    How do I trouble shoot this? oO Originally I had created the VHD as expanding, where now I recreated it at it's full size of 900GB. Maybe that will make a difference.
    Thanks for the help
    Cheers
    Maike

    Hi Maike,
    Do you mean that you can mount the VHDX via disk management but cannot mount it via a script? If so, please provide the diskpart’s mount commands in the script.
    In the meantime, check if destination partition is NTFS formatted.
    Problem with Attach VHD function: The version does not support this version of the file format
    http://www.paulauskis.lt/2010/03/problem-with-attach-vhd-function.html
    Please Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
    Best Regards,
    Mandy
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
    Hi Mandy,
    I can not mount it after a reboot. So I create the VHDx via disc management and attach it afterwards without problem. After the server reboots and the attached VHDx dropps, I can't remount it. Gives me the errors I posted above.
    As I had mentioned above, I recreated the VHDx at it's full size this time, rather than expanding. That worked just fine and I can remount after reboot.
    So I consider this dealt with ;)
    Thanks anyway!

  • The iPod software update server could not be contacted. the server does not support this version of itunes its saying

    i bought a new iPod nano 6th generation and when i am trying to sync it with iTunes its saying "the iPod software update server could not be contacted. the server does not support this version of itunes" cn any one help me how to set the thing right.
    Regards,
    Brahma.

    You need to update to the latest version of iTunes. Go to the apple and select software update.
    i

Maybe you are looking for