I dragged and dropped files to my time capsule from my laptop but now I cannot find them anywhere on there... Please help

I dragged and dropped files to my time capsule from my laptop but now I cannot find them anywhere on the time capsule... Please help I no longer have that laptop. All it is showing is time machine backups.

Open Macintosh HD and look for your Time Capsule icon under the SHARED heading on the left side of the window.
Click on the Time Capsule icon and folder will appear to the right representing your drive
Double click the folder to reveal the contents
You should see a xxxxxx.sparsebundle file for each computer that is backing up and the files that you dropped onto the Time Capsule from the other computer. Leave these files alone.
If you do not see the other files, unfortunately, they are not there.

Similar Messages

How to drag and drop files in Time Machine Capsule?

Hi, all
I have recently bought a Time Machine 2 TB. I have backed up my MacBook Air over the Time Machine. I was trying to copy or drag and drop files in the time capsule, but it wont allow me. It Neither does allow me to create any new folders in the Airport Time Machine. If i try to drag and drop files in it, it says, click to Authenticate, however, there is no place or tab to authenticate. I am the administrator.
Please advise.
Thanks

It sounds like you are trying to copy / paste files to the Time Capsule Finder icon, when you should be copying / pasting to the drive on the Time Capsule, which is named "Data" unless you have changed it.
Open any Finder window and look for the Time Capsule icon under the Shared heading on the left side of the window
Click on the Time Capsule, which will display a folder to the right named Data, unless you have changed the name of the drive
Double-cllick on Data to mount the drive on the desktop
You can drag / drop or copy / paste files onto the drive icon, or open the drive and drag files into the open window.
The first time that you do this, you may be asked for the Time Capsule device or disk password.

I have 2 auxillary disk drives for my MacBokk Pro. Time Machine uses one for backup and I use the other for storage, but I am unable to create a new folder or drag and drop files or folders to the aux drive.

I am unable to create a new folder on either of my auxillary disk drives. I can access the files and folders that were there when I transferred one of the drives from a PC. Time machine uses one for backup and I want to use the other to store photos which are large files. An help would be appreciated.

Thanks for the reply. If I reformat the drive will I be able to access the files on it from the MAC. I do not share the drive with a PC. The files were originally created on a PC which I no longer use. I do want to continue to access the files put there by the PC. I would like to not have to copy them over to the MAC hard drive just to use them. The second aux drive is new and works fine because it was formatted by the MAC. I can drag and drop files there and work with just as if they were on the internal drive.

HT2518 how do i or can i drag and drop files from one external drive to another ???HOW

how do i drag and drop files from one external drive to another, i cannt get both drives to open up. only one at a time.. i have alot to learn i know but that is where i am at the time...

You posted here so would assume you are also talking about running Windows.
Are the drives NTFS and use on Windows?
Are they Mac HFS formatted?
You likely will need NTFS for OS X in one case. to mount PC and use under Mac OS Lion
MacDrive to mount and WRITE to HFS drives under Windows

Can't drag and drop files into Attachments while in Administrator mode

I can drag and drop files into attachment easily when I'm not in Administrator mode. But I need to be in Administrator mode at work and therefore for some reason I cannot drag and drop files into attachments; I'm forced to manually search and select particular files for attaching, which significantly slows my day-to-day work.
Is it a bug?
I have the up-to-date version of Thunderbird and I use MS Windows 7 Ultimate.
Any help would be highly appreciated.
Thx

To diagnose problems with Thunderbird, try one of the following:
*Restart Thunderbird with add-ons disabled (Thunderbird Safe Mode). On the Help menu, click on "Restart with Add-ons Disabled". If Thunderbird works like normal, there is an Add-on or Theme interfering with normal operations. You will need to re-enable add-ons one at a time until you locate the offender.
*Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

Can't drag and drop files in iTunes 7.6

I've suddenly lost the ability to drag and drop files in iTunes, so I can't change the order of items within a playlist, move tracks from one playlist to another, or move a selection of tracks to an external drive. When I click & hold on a track, nothing happens at all; if you try to drag the file it doesn't move then bounce back - just no reaction at all. One day it worked fine, next time I launched iTunes the problem appeared. I'd had 7.6 up and running for about a month without this problem, and had no other software downloads or updates immediately before the problem appeared. I'd not changed any iTunes preferences either.
I've checked that lefthand column in the playlist is selected, & that shuffle is turned off, & I'm not trying to move things into a smart list. I've tried trashing the com.apple plist, and repairing disk permissions. My iTunes library lives on an external hard drive, but this hasn't been an issue before. Drag and drop still works fine in other apps, so I don't suppose it's a mouse or Finder issue.
I see a few other people have posted about this, but I haven't seen any solutions yet that worked for me. Am I missing something blindingly obvious? If anyone's got any ideas on this one I'd be eternally grateful - the ability to move things around easily was one of the main attractions of iTunes for me.

Thanks David - that wasn't it, but I have managed to find a fix after trawling through various forums - I logged out then logged back in. Simple as that! Sadly I'm still none the wiser as to what caused the problem in the first place, so don't know if or when it'll reoccur. I also found it was affecting iPhoto after I first posted, so not an iTunes specific problem obviously. Thanks to all those who posted fixes in various forums, though some looked a little too scary for me to try out...

Still loose ability to drag and drop files in Project pane.

In the last two weeks, I've had two instances where I lost
the ability to drag and drop files within the Project pane.
However, here's the kicker...the problem doesn't manefest itself
until after I end my session, close RH, then restart the computer
and restart the project. That means I don't know that I'm working
in a broken project until AFTER I've zipped up and saved the
current project. I tried addressing this in this orum once already
and I received some suggested fixes (included in the list below)
but it never fixed and and has happened again.
Some pieces of information:
- I've deleted the .xpj and cpd files, no joy.
- I've regenerated the output, then tried to move a file, no
joy.
- I've generated a CHM (supposedy to update other files), no
joy.
- I'm not attempting to move a file to a directory where that
name already exists
- If while I'm having the problem, I create a nw project, new
folders, and new topics, they move around fine.
- If I create a topic IN the directory with the problem, I
cannot move that file.
- I've zippd up a broken project and sent it to Adobe. They
openned it and it was fine. They zipped it back to me and it still
wasn't.
- If I create a new project, replicate my directory
structure, and import the htm files into the new structure (a
ubdirectory at a time), the files move fine.
- I'm only working local on Windows 2000 with 30 GB of disk
space, and I have not installed anything else on the computer in
the last 2 weeks.
- I've escalated this to the next level at Adobe and am
sitting by my phone with my headset waiting for the call back
"within the next two hours".
Anyone seen this?

quote:
Originally posted by:
Amebr
Could the files have somehow been set to read-only?
I'm not sure on the exact details of your process, but if you
open the project after unzipping it, perhaps the unzip process has
changed that file attribute...?
I appreciate your response, but no...all files and
directories had all permissions allowed. The zip process wasn't
involved until aftrer the problem showed itself...I zip just for
backup with the hope that I never have to go to it. It was my
working project that lost the ability to move files. It just turns
out that after it happened and I went to the zip that it showed
that the problem had affected the files before I zipped them and
therefore, the zip was of the broken set.

Drag and Drop Files Onto Seagate External Hardrive

I can't seem to just drag and drop files I want to store on an external hardrive with Seagate. I hate that. I just want a simple drag and drop so I can free up some space on my computer. But Seagate just seems to just seems to say **** you, we're gonna do it backwards ***. Can someone please explain how to just drag and drop files? I have zero idea, and they don't make it simple to understand.
So for the love of god....please explain it to me (without use of computer terminology or telling me places I should go on my computer that I don't know what the **** they are. Renders your help useless, and it's frustrating because no matter how many times I ask this, you just give me help i can't understand anyway.)
Please....it's not hard to ask.
If possible, use step by step instructions, if you need to tell me to go somewhere on my computer, tell me where that is too so I know where to go. Don't be vague, I can't understand vague instructions when i read them.

What is the drive formatted as? this is extremely likely the issue.
FORMAT TYPES
FAT32 (File Allocation Table)
Read/Write FAT32 from both native Windows and native Mac OS X.
Maximum file size: 4GB.
Maximum volume size: 2TB
You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
NTFS (Windows NT File System)
Read/Write NTFS from native Windows.
Read only NTFS from native Mac OS X
To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
AirPort Extreme (802.11n) and Time Capsule do not support NTFS
Maximum file size: 16 TB
Maximum volume size: 256TB
You can use this format if you routinely share a drive with multiple Windows systems.
HFS+ ((((MAC FORMAT)))) (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
Read/Write HFS+ from native Mac OS X
Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
To Read HFS+ (but not Write) from Windows, Install HFSExplorer
Maximum file size: 8EiB
Maximum volume size: 8EiB
You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
EXFAT (FAT64)
Supported in Mac OS X only in 10.6.5 or later.
Not all Windows versions support exFAT.
exFAT (Extended File Allocation Table)
AirPort Extreme (802.11n) and Time Capsule do not support exFAT
Maximum file size: 16 EiB
Maximum volume size: 64 ZiB
You can use this format if it is supported by all computers with which you intend to share the drive. See "disadvantages" for details.

Cannot drag and drop files in Finder on Yosemite 10.10

This is basically exactly as it sounds. I just discovered that I can't drag and drop files in the Finder anymore for some reason. I've restarted 3 or 4 times since upgrading, and I've reset the SMC and PRAM already. Because of this, I can't update an application I'd like to. Copying the application does not work either; the paste option is greyed out It's not just applications; click-and-drag and three-finger drag simply don't drag the file. It is not happening invisibly either; going through the motions and dropping the file on Applications yields no result.
I searched the Web for this but didn't find anything similar for Yosemite. If anyone has a suggestion or the same problem, I would love to hear it.

For two days I tried everything I could to get the drag and drop to start working again in Yosemite on my MacBook Pro Retina. I even re-installed the OS via Disk Recovery. I wound up at the Apple Store where they couldn’t find the bug either, but we did the following and I am back up and running. There is a bit of a downside, so please read all the way through.
I have no idea if this will help you, but if you log in under a GUEST account and this drag and drop issue is NOT there - then try this. For whatever reason this bug was localized to just my single user settings Library. The GUEST account could drag and drop fine. Weird. Anyway, here’s what we did at the Apple Store that has kept me up and running….
Create a new user
Logout (deactivates the busted user library) and then login as that new user.
Enable Root User (superuser) while logged in under this new user. YouTube has some 1min. videos on how to do this.
Navigate to the Library (which is usually invisible) listed under your original admin user account.
Rename this folder. I just added ORIGINAL to it.
Also, create an alias for this folder and leave it there.
Go turn off Root User and log out.
Now, when you log back in under your usual User Acct. the system can’t find the Library system folder (because you renamed it) so it creates a fresh one. This new Library folder will still be invisible to you, but should work.
This fixed my drag and drop problem.
What this does though is kill all of your plists, saved website passwords, bookmarks, application settings, etc. for everything. I mean everything. Which kind of stinks.
This is why we created the alias in Step 05, click on it and you can open your ORIGINAL Library folder and drag out the files as you need them. I guess one day I'll drag over the one setting that borked my machine, but I haven't found it yet.
This is certainly not ideal and may not even be the best solution. But it got me up and running with no loss of files, just slows me down as I have to re-populate all my log-ins, etc.
Hopefully someone will come up with a better fix or patch.
Hope this helps.

Drag and Drop files to upload snag

I am developing a Director projector application that uploads
a users local files to a server via an FTP Xtra. I would like to
have an icon on the desktop that the user can drag-and-drop files
onto and the application automatically uploads the files. I have
created a folder on the desktop and an application that poll it for
content to initiate the upload but the problem with this is that
the user, by dragging files to the folder, will unknowingly move
the files to "upload folder" and they will be removed from their
original locations. This is obviously not what anyone desires. I
would like to have the drag-and-drop trigger the upload from the
file's current location.
One solution that I have implemented is using the "Drag &
Drop Xtra", from Meliora Software, and created a MIAW that looks
like a desktop folder icon. The problem with this is that the icon
is present only when the application is running and I can not keep
it pinned down to the desktop. When it is clicked-on it will come
to the front, like any other application. Is there a way to keep a
MIAW pinned down?
Another POSSIBLE approach would be to place a shortcut to the
application on the desktop and when a file is dropped on it,
capture the file path and pass that along to the Director
application on startup. Is this possible? Is there an Xtra to do
this or does Director have this capability built in?
Ideally, we would like to have a folder on the desktop that
only allows copy-and-paste functionality to itself but that would
be an OS issue and out of the control of Director. Have any of you
created such an app? Any ideas are welcomed.
Thanks in advance.

> Another POSSIBLE approach would be to place a shortcut
to
> the application on the desktop and when a file is
dropped on it,
> capture the file path and pass that along to the
Director
> application on startup. Is this possible? Is there an
Xtra to do
> this or does Director have this capability built in?
this approach won't work because every time a file is dropped
on the icon a new instance of the projector will run.
To achieve that you need:
1) A Director version prior to MX 2004, Director MX would be
fine.
2) Remove the projector's button from the task bar when it
starts with our Window Xtra:
wndRemoveFromTaskbar(true)
3) Move the projector's window to the background with our
Window Xtra:
WndSetDepth(wndGetMain(),"back")
4) Apply a 1-bit alpha mask to change the projector's shape
to make it looking like an icon, again, with our Window Xtra:
wndTransInit(member "1BitMask",false,false)
5) Leave all the Drag&Drop Xtra code for drop as is.
That's it, it seems MIAW isn't required.

Drag and drop Files to native disk lazily

I need help on how to copy, through DnD, a file/attachment from an email application (http://columba.sf.net) to the native operating system. Theres no problem to drag and drop files that already resides on the file system, this Ive done without any problem.
The problem is that the attachment lies within the email, and it needs to be extracted before it can be copied to the correct location. For performance reasons I dont want to extract all attachments to the disk when the user opens an email with attachments. Neither do I want to extract the attachment during the user's DnD operation. I would like to make the copy/extraction when the DnD has been completed.
As Ive understood is that when I want to DnD a file to the desktop, I must have a Transferable that supports the DataFlavor javaFileListFlavor. This will return a List of Files by the getTransferData() method. But the problem is that the Files must exists on the diskdrive before it the DnD starts, ie before the getTransferData() method is called.
This I cannot do, since I the getTransferData() method is called multiple times during the DnD action, and I dont want to extract the attachment until the DnD is complete. (performance issues)
My first idea was to create an empty dummy file on the disk, and use this as the source File to be dragged around. Then when the DnD is completed, I would extract the attachment from the email and make the copy manually. Doing it this way, Im sure that
* theres no unecessary extraction,
* the user doesnt have to wait until he has choosen where to put the file
* the extraction is done according to the API for the email client.
But as it seems now, theres no way of knowing the location of the drop target from the TransferHandler or the DataFlavor. And if I dont know the location of the drop, I cannot make the manual copy.
Do anyone know of a solution or workaround, using the new or old DnD implementation?
ANy help is appreaciated!

Hi RedSolo! I've been working with the exact same problem for quite some time. I think your "workaround" in the frappucino module seems to be the best way to solve this problem. I have almost the same solution in my project. What I would like to do is to present a progressbar during the time it takes to wait for the "create files thread" to finish. But I haven't found a solution since I'm blocking the event thread. Do you have any tips or ideas how to solve this?
Thankful for any ideas!!

Drag and drop files for burn to DVD takes FOREVER

When I drag and drop files onto the blank DVD icon, the ghosts of said files just hang there for the longest time, and I get a spinny beach ball. Many, many minutes later things finally return to normal and I can proceed with burning the DVD. It's just copying some aliases, right? It didn't used to take more than a couple of seconds before I upgarded to Mavericks. So what the **** is taking so long now?
PBP 2.66 Core 2 Duo, running 10.9.1, burning to a Samsung Portable DVD Writer Model SE-218

Thanks for the reply. If I reformat the drive will I be able to access the files on it from the MAC. I do not share the drive with a PC. The files were originally created on a PC which I no longer use. I do want to continue to access the files put there by the PC. I would like to not have to copy them over to the MAC hard drive just to use them. The second aux drive is new and works fine because it was formatted by the MAC. I can drag and drop files there and work with just as if they were on the internal drive.

Open dialogue box in Lion is not supporting drag and drop files (UPDATE)

This is freaking me out. Because now in Lion you can't drag and drop file from the desktop (and other folders!) to open dialogue box. It was most usefull function in Mac OS X. Why Apple kill usabillity?
Access to the desktop is not a problem (command + d), but if the current file is located deep in the hierarchy of folders, it becomes a big problem!!!
Dear Apple, please fix it as soon as you can.
UPDATE: Omg, I found the problem, it works only if I drad and drop file on the bottom panel, not in all open dialogue box area:

Interesting, this is the second time today I've seen this one come up. It does work, drag and drop works like crazy everywhere here. What does console say when it happens (or not, in your case)?

Drag and drop files into folders in iPad reader? or iTunes?

is it possible to drag and drop files into folders in iPad reader? or iTunes? It is very clunkey to have to click each separate file to instruct it to move to the folder. Better still, can I just sync an existing folder on my hard drive so the pdf's inside always remain up to date on my iPad?

There is no way to drag and drop in Reader on an iPad.
There is no way to sync PDFs in a folder on your hard drive to those inside of Reader.
There are readers (which are NOT free) which let you do some of these things and have more capabilities. You might check out PDF Expert from Readdle which costs $9.99 US.

I can't drag and drop files...

Hello!
Out of nowhere, I can no longer drag and drop files on my desktop or within my Finder windows. I also cannot drag pictures from Safari onto my Desktop. I do not think there is a problem with my Trackpad as I can still move Safari windows and the like around the screen. I am using an Intel-based Mac Book Pro with OS X 10.5.8 Any help would be amazing and much appreciated. Thank you!

I'm having the same issue. I can no longer drag images from Safari (5.1.2) to Finder. I am on Lion (10.7.2). Has anybody found a fix for this? Having to right-click and "Save As..." makes me feel like I'm working in Windows XP, which is, needless to say, he11 of an unbearable kind.

I dragged and dropped files to my time capsule from my laptop but now I cannot find them anywhere on there... Please help

Similar Messages

Maybe you are looking for