I DROP MY IPOD IN WATER HOW DO I GET IT TO WORK

I DROP MY IPOD TOUCH IN WATER. HOW DO I GET IT TO WORK AGAIN?

Do not turn it on or charge until it is dry. To dry:
How to fix a wet iPod or iPhone | eHow.com

Similar Messages

  • My ipod is disabled how can i get it to work please

    my ipod is disabled it reads connect to itunes how can i get into my ipod?

    Using the Computer you usually Sync with... Follow the Steps in this Article
    Recovery Mode / Unable to Update or Restore
    http://support.apple.com/kb/HT1808

  • What do you do when you drop your iPod in water, and then your speakers don't work

    Please help

    Hello,
    I am currently an owner of an Ipod Touch 4th generation. I see you are having problems with your Ipod Touch, so I will try to find a solution to your problem.
    Make an Appointment at the Genius Bar of an Apple Store
    How did you drop it in water?
    Get an external speaker
    Hope that helps!
    If none of the above solutions work, can you please respond back ASAP as I will try to find another solution to your problem (This might even help others with the same problem!)
    Cheers!
    Pizza98704

  • I dropped my ipod in water ... the backlight will come on when the battery is dead and i plug it in .. but when it is on the home screen it won't come on

    i dropped my ipod in water ... the backlight will come on when the battery is dead and i plug it in .. but when it is on the home screen it won't come on

    After drying the iPod in a sealed container od uncooked rice for a week with changing the rice daily, try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem likely caused by the water.

  • I dropped my ipod in water now it won't work help

    I dropped my ipod in water and now it says its needs to be plugged in to itunes but when it is it says its still not and it won't respond what do i do

    If you did this recently put it in rice to absorb the water. Uhm if not, try to take it to an Apple store and give them a sob story ahha, maybe they'll give you a break. Good luck (:

  • I dropped my phone is water. How do I get it to work again?

    So I dropped my phone in water and I quickly took it out. And it still works, but the speakers are broken on it. How do I get them to work?

    You won't.  Had you placed the phone immediately in a bag of dry rice for a few days, you might have had a chance.  But turning on a phone before it dries completely just destroys it.
    Bring it in to Apple for replacement. 

  • Okay well i dropped my ipod in water saturday night and i was wondering if apple would be able to give me a replacement on my ipod4g

    okay well i dropped my ipod in water on saturday and was wondering if apple would be able to give a replacement?

    The Apple warranty does not cover accidental damage.  The ipod has a liquid contact indicator installed in it, so they will know that your device was "dunked".  So, you will have to pay the repair price to have it replaced.  The following link should give you the amount you will need to pay for your model of ipod.
    http://support.apple.com/kb/index?page=servicefaq&viewlocale=en_US&geo=United_St ates&product=ipod&select=REPAIR_PRICING

  • If i dropped my ipod in water would it still work???

    if i dropped my ipod in water would it still work ????????

    There are a couple of solutions to that. Most involve silica gel. Silica can be found in little packets at shoe stores and such, it absorbs water and moisture. If you set your iTouch in a bowl of it, and let it sit for 3 days, you may get it back to working.

  • I have 2 ipod touch's that both have frozen screens and will not reset or show up in itunes. They both froze after trying to update to the latest software version. How do I get them to work?

    I have 2 touch's that froze when trying to update to the latest ios version. Neither respond to restarting the devices. They are also not recognized in windows or itunes. How do I get these to work. I followed all of the instructions on  the apple website and they still don't work. I have verified that I have apple support for mobile devices installed in itunes and my version of itunes is 11.0.1. I am running windows 7 64bit with service pack 1 installed and all of my updates are current. Is anybody else having this problem with their apple devices?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • The touch screen is not working when I am in the Music app of my iPod Touch.  How do I get it to begin working?  It just stopped today.

    The touch screen is not working when I am in the Music app of my iPod Touch.  How do I get it to begin working?  It just stopped today.
    Does anyone know what I can do?  I am unable to switch screens, and I can not see the track that is playing.  The only was I can switch between songs is to use the controls on my headphones.

    Try the stamdard fixes to rule out a software problem:
    - Reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.

  • My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • My iTunes library is on an old PC that no longer works. I purchased a new iPod Touch.  How can I get the contents of my library to the new iPod?

    My iTunes library is on an old PC that no longer works. I purchased a new iPod Touch.  How can I get the contents of my library to the new iPod?

    My iTunes library is on an old PC that no longer works. I purchased a new iPod Touch.  How can I get the contents of my library to the new iPod?

  • I have an iPod nano 6th generation and I downloaded 3 music videos but they won't play on my iPod. They only play on my laptop/iTunes. How can I get it to work?

    I have an iPod nano 6th generation and I downloaded 3 music videos but they won't play on my iPod. They only play on my laptop/iTunes. How can I get it to work? I know that my iPod should take music videos because there is a pre-made playlist called "Music videos". Can anyone help me please????

    You can sync the music videos, but they won't play on your 6G Nano, because it does not support video playback. Sorry.
    B-rock

  • My new iPad is synced with iTunes but now it won't recognize my iPod nano. How do I get it to recognize both? iTunes synced with my Nano just fine until I added the iPad.

    My new iPad is synced with iTunes but now it won't recognize my iPod nano. How do I get it to recognize both? iTunes synced with my Nano just fine until I added the iPad.

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • HT1349 My Ipod was stolen how do i get the serial number?

    My IPOD was stolen how do I get the serial number?

    The easiest way to find your serial number is this Open Itunes...click help... run diagnostics.....(tick or untick as necessary) so that you just have ticked the last two,  device connectivity and device sync.  run these tests. it will say no ipod/ipad found but will give results of test....scroll down to bottom of results... here you will find the serial number of your last attached devices.

Maybe you are looking for

  • Where is 'save as draft' icon in Mail?

    Mail Help says to click the Save as Draft icon to save a message you're working on.  But I cannot find the icon anywhere.  I know that it saves automatically anyway, and that Apple-S saves as a draft.  But, if Help says to use the icon, I would think

  • SOAP RECEIVER and WSDL-what specifies how my SOAP REQUEST should look like?

    Hi I am sending a request to a webservice (SOAP RECEIVER) but the webservice in question does not have a wsdl. I have created my own wsdl based on another example but when mapping to the REQUEST part of this and routing it through my SOAP RECEIVER ch

  • I have iPad and I touch can I use the power cord

    I have an iPad and an itouch can I use the same power cord

  • IPhone 3Gs stuck in restore mode.  Unknown error 1015

    Error: "iPhone could not be restored. An unknown error occurred (1015)". I'm in Tanzania and was trying to jail break my phone with one of those online download programs that say they can break any iPhone. 100% guaranteed! Well, my phone is now locke

  • Need help to get serial part working

    i use this lap top to tune my race car because it has the serial port. every time i tun on my laptop i get " Your network adapter SMC IrCC (Infraded Communications Controller) (0007) is not working properly. You may need to set it up again. For more