I droped my z10 in the water screen touch doesnt work HELP!

I accedently dropped my z10 in the toilet. I put it in rice for 3 days. the screen turns on and you can see everything on there but when i try swiping to unlocking it or answering calls where the calling swipe appears the touch swipe doesnt work on that part so it wont allow me to answer calls of unlock? what should i do? Please help I love my z10!

More time in the rice.
1. Remove the battery immediately!! Do not attempt to turn on your BlackBerry.
2. Let the device dry in a warm, dry place for 3 to 5 days* (see below)
3. DO NOT "check it each day" by placing the battery in. Leave it be to dry completely. This takes time. Replacing the battery to check it can only damage it more (moisture + electrical current = disaster).
4. If the device is warm after the drying period, allow it to cool to room temperature before placing the battery back in.
Suggestions on drying your BlackBerry in a warm place (open, with the battery out):
*Place the BB in a container of dry UNcooked rice, and then you might also place it in any of the locations mentioned below.
*On top of any dry heat emitting electronic component: TV cabinet or CRT, LCD, cable TV/Satellite converter box or plasma monitor
*On the dashboard of your car on a sunny day
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

I can not charge my Ipad after I droped it,also the home screen dos not work,whats the solution?

i can not charge my Ipad after I droped it,also the home screen dos not work,whats the solution?

Hard Reset
Press and hold BOTH the Sleep/Wake button & the Home button until you see the Apple logo on the screen.
if no result try to back up and restore via itunes on a computer.
if wont restore try this
recovery mode
open itunes on computer
plug cable into computer not iOS device
turn device off
hold home button and plug cable into IOS device. do not release home button until an itunes graphic appears on IOS device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808

Im going to go to apple to show my phone that my wi-fi wasnt working and now iv droped my phone and the hole screen came out, its not mashed it just came out, but work, so now im worried apple my wont take care of it

im going to go to apple to show my phone that my wi-fi wasnt working and now iv droped my phone and the hole screen came out, its not smashed it just came out, butstill works, so now im worried apple my wont take care of it, what will they do ?? it was a bran new phone

You are correct to worry. There is no way for Apple to know if the wifi problem was before or after the drop. If you have Apple Care +, you can get a replacement device for a deductible. If not, user damage is not covered under the warranty or regular Apple Care. You would need to see if they will repair the screen (at your cost), or if you would have to purchase an out of warranty replacement.

Macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again

macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again lik it did before

If you have records that show that you've taken your MacBook Pro in for a year to fix the machine, I would escalate the problem to Apple Customer Relations - unfortunately I don't have a number for Spain.
It would only seem logical to me that if you've been trying to have the machine repaired during the time that the 'recall' was in effect that you should be eligible for a new logic board. But only customer relations will be able to make that call.
Good luck - take the issue as high up the food chain as you can and see what happens.
Clinton

Bridge from CS3 won't open and just sits on the task bar. If I hover over it, I can see a small view of the last screen I was working on. It won't open up full screen, what should I do. I've closed it and restarted my computer numerous times with no luck.

If I hover over it, I can see a small view of the last screen I was working on. It won't open up full screen, what should I do. I've closed it and restarted my computer numerous times with no luck.

Check System Preferences > Energy Saver
Select: Put hard disks to sleep when possible
Then click: Restore Defaults

I bought the iPad and got it home and when I turned it on, all I see is the iTunes logo w/ a usb connector and arrow. How do I clear that and go to the home screen??? HELP!

i bought the iPad and got it home and when I turned it on, all I see is the iTunes logo w/ a usb connector and arrow. How do I clear that and go to the home screen??? HELP!

You need to Set Up the iPad... Connect it to iTunes...
See here for Getting Started...
http://www.apple.com/support/ipad/
and here...
iPad User Guide iOS 5
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf

I updated to iOS 5.1 but my camera buttone form the lock screen is not working what should i do

i updated to iOS 5.1 but my camera buttone form the lock screen is not working what should i do. i tryed restoring but it didnt work .
When i try the camera loncher but it's not working

i feel stupid now because i didnt know to swipe it up lol
thanks

Has anyone actually got the Green Screen feature to work?

Has anyone actually got the Green Screen feature to work? I've been trying for about 8 hours, absolutely no success. I have followed the iMovie Help instructions and the examples on the internet, over and over again. I've tried every imaginable variation on the instructions. Nothing from my green movie shows up. The green in my video is pure green - 100% green, 0% red and 0% blue. Yet the non-green images in the video aren't getting displayed at all. Several other people have mentioned a similar problem on these forums and they are all "unanswered". Is that because this is an unsolvable problem? Is it an iMovie bug? Sigh. I'm a big fan of Apple but stuff like this gives them a bad name.

After several more hours of diagnosis I have identified some conditions which can make Green Screen slightly work (but not much). The condition is as follows. The green screen clip must be carefully dropped at the beginning of a video clip, such that at least the first two seconds of the green screen clip (no less, but no more or the clip will become attached to the previous clip and then it's broken again) are displayed over the PREVIOUS video clip. But the green screen will not work on the previous clip, only on the second clip. So you will always lose the first two seconds of the green screen video. It took me a lot of experimenting to discover this anomaly.
Clearly this is a bug, but since not all users on the internet experience this bug, (some online videos shows that Green Screen actually works as advertised) it's most likely related to the video card driver. My video card is an ATI 4870. If you have such a card, there's probably no hope that you can get this feature to work unless Apple fixes the driver or possibly the iMovie application, or you use my tricky workaround.

My screen has turned black as if the LCD screen isn't working. There is no damage and the phone is still responding to vibrations and there is a dial tone when called. What is wrong with my phone?

My screen has turned black as if the LCD screen isn't working. I have tried using the lockbutton and home button to turn it on, but it doesn't work. What should I do?

Your phone is probably broken.

I forgot the code for my iPhone to access the Home screen I do , please help me try formatting the iphone but when I put in nfc mode and connect it to the pc recognizes it and everything when you try to format the error 3004 appears

I forgot the code for my iPhone to access the Home screen I do , please help me
try formatting the iphone but when I put in nfc mode and connect it to the pc recognizes it and everything when you try to format the error 3004 appears

Hello polo-angulo,
I apologize, I'm a bit unclear on the nature and scope of the issue you are describing. If you are saying that you are getting an error code (3004) when you try to restore your iPhone (because you could not remember your passcode), you may find the information and troubleshooting steps outlined in the following articles helpful:
Resolve iOS update and restore errors in iTunes - Apple Support
Get help with iOS update and restore errors - Apple Support
Sincerely,
- Brenden

After done the Mavericks update from Mountain Lion, I can't no more extend my applications to the second screen. Can somebody help me ??

After done the Mavericks update from Mountain Lion, I can't no more extend my applications to the second screen. Can somebody help me ??

Check here:
System Preferences > Mission Control > uncheck Displays have separate Spaces > Log Out ( >Log Out <user>) > Log back in

Can't get a song to play on the title screen of IDVD. Help!

I can't get a song to play on the title screen of IDVD. Help! The song is there, but won't play in preview. I have done myriads of movies on IDVD, and know how to put a song onto the title screen. The volume is up, etc. but no song will go on.

Hi
Did You by any chance - change this
to
If You make it black then
- Preview - will be Silent and without Motion
- and so will resulting DVD be
But this You already knew ?
Yours Bengt W

When i touch the screen it doesnt work!!

When i touch the screen it doesnt work. I tried updating the software and changing the options on the touchscreen config. What else can i do? Any one know what to do??
Its an HP Touchsmart IQ504 Desktop. HELP!

iluvduelo wrote:
When i touch the screen it doesnt work. I tried updating the software and changing the options on the touchscreen config. What else can i do? Any one know what to do??
Its an HP Touchsmart IQ504 Desktop. HELP!
Reinstall the drivers from the HP Website and Recovery Manager.
Reset the options to factory default in the HP Touch screen Config.
If it doesn't work, either touch screen failure or software failure.
Perform a System Recovery, if it works after, it's a software problem.
Still doesn't work, hardware problem, contact HP.
I have more HP devices than you'd expect.
1 HP TouchPad 32 GB with Android
2 HP Touchsmarts (310-1000z and IQ527)
2 HP Printers (J6480 and J5750)
1 Laptop (HP DV6253CL)
Have at least some experience in each of those devices, and i'll do my best to help you.
Kudos if I helped!

Hello, into my ipod there got some water and it doesnt work. Is that possible to repair it in the apple store? Thanks!!!

Hello, into my ipod there got some water and it doesnt work. Is that possible to repair it in the apple store? Thanks!!!

Apple will not repair your iPod, instead they will exchange itfor a refurbished one for a fixed about. The price is listed here:
Apple - Support - iPod - Repair pricing

Is it possible and if so how can I right click on the on screen touch keyboard

Is it possible and if so how can I right click on the on screen touch keyboard.

No it not design for that. I just tried it. Left click only. I recomend that you do not mess with setting with in the software it self you may end up causing the keyboard to malfunction and crashing your computer.I all so just double check our computers help and support On screen keyboard settings. There was no option given for switching the mouse clicker. Just sticky keys and short cuts are listed. Sorry I hope this answered your question. I would all so not recomend trying to install other software you may find on switching key board setting unless it came from HP company design especially use on these types of computers. You may end up destroying your hard drive and computer all together.

I droped my z10 in the water screen touch doesnt work HELP!

Similar Messages

Maybe you are looking for