I dropped my 3gs in water; backlight not working

After I accidently dropped the iphone 3gs in water it appeared to be working but after a while when I had to use it, it was gone. Then I left it out on the hot sunlight for approx 30 min. and still did not work. 4 hours later I saw signs of coming back; in fact it did, but the backlight still has not. Can someone help?

What would you like us to do?  You've damaged your phone by dropping it in water.  It's unlikely to work again.
You'll need to bring your phone into an Apple Store for an out of warranty replacement, which will cost you 199.00 USD.

Similar Messages

  • HT5622 A month ago I dropped my iPhone in water and it works fine except for the signal  it always says "searching". Can you help with this problem?

    About a Month ago I dropped we went swimming and I dropped my iPhone in water and it works fine except at the top for the signal it says searching. Can you please help me with this problem?

    It's very likely that the phone is permanently damaged - water corrodes the very fine copper strips which form the circuitry very quickly - but only a service engineer can tell you what its condition is and whether it can be restored to health. If possible take it to an Apple Store (make an appointment) for a free assessment. Don't be surprised if you are told you will have to replace it.

  • HT1937 My iphone 4s fell in salt water and not working. What can i do?

    My iphone 4s fell in salt water and not working. What can i do? My location is Russia. Is it possible to send my device to apple-USA for repair?

    No, you would have to send it to someone you know in the USA and have them take it to any AppleStore and do an out-of-warranty replacement for $199 USD. Apple will not accept a shipment from your and the warranty is not international.
    You can take it to a 3rd party repair shop and have them open it and clean it. But you need to do it quicly saltwater will very quickly damage the components without that phone.

  • Bluetooth from iPhone 3GS to MacBook Pro not working?

    I am having (seemingly) bluetooth connection issues with "some" devices to my MacBook Pro.  I note:
    * Mouse pairs fine
    * iPhone 3GS does not remain connected (focus of this forum question)
    Error - after pairing my iPhone 3GS to my MBP I get an error:
    The Bluetooth Network is Unavailable
    There was an error connecting your device.  Make sure the device is turned on and in range.
    Notes:
    * MacBook Pro details:
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro6,2
      Processor Name:          Intel Core i7
      System Version:          Mac OS X 10.7.3 (11D50b)
    Background: Ultimately interested in teethering my iPhone 3G data connection to my MacBook Pro, but for the moment the bluetooth connection won't even remain in place.

    nothing in these articles helped unfortunately - some more clarification:
    tethering via USB from iPhone 3G to MacBook Pro => WORKS
    tethering via Bluetooth => does NOT work, with bluetooth connectioning not staying up
    During pairing process:
    devices "see each other"
    pairing appears to work, then you see that the connection drops out directly afterwards (almost immediately)
    on iPhone message = "Connection Unsuccessful - XXX's MacBook Pro is not supported"
    on MacBook - it's just the connection in Bluetooth options shows up as not connected
    in /var/log/system I see some bluetooth related lines:
    Apr 18 19:33:14 Gregs-MacBook-Pro bnepd[18950]: [IOBluetoothDevice instantiateChannel] BluetoothHCIAuthenticationRequested failed (0x0006), so retry
    Apr 18 19:33:14 Gregs-MacBook-Pro sandboxd[18966] ([18950]): bnepd(18950) deny mach-lookup com.apple.blued
    Apr 18 19:33:14 Gregs-MacBook-Pro bnepd[18950]: [IOBluetoothDevice instantiateChannel] BluetoothHCIAuthenticationRequested failed (0x0006), so disconnect device
    Apr 18 19:33:53 Gregs-MacBook-Pro blued[22]: Removing Bluetooth configured device: 00-26-08-23-23-9d
    Any other ideas?  Is it a physical problem with my MBP?  but then again my bluetooth mouse stays connected ok.  And in terms of the iPhone well it tethers fine to the iPad via bluetooth....

  • IPod touch G2 backlight not working replaced LCD, still not working

    After water got in my iPod the backlight does not work. I tried putting it in rice for a few days but the backlight still did not work.
    Then I replaced the LCD with the same result. Everything but the backlight works.
    What else can I try?

    Then there is a problem with the logic board or there is a bad connector/connection/screen

  • Problem with Macbook Pro early 2011, webcam not working in any apps and windows 7 or 8 on bootcamp, keyboard backlight not working?

    Hi Guys
    I recently bought a second hand early 2011 Macbook Pro 15 inch and are having 2 problems. The first is that none of the apps detects my webcam at all, the second is, i have Windows 8 installed on bootcamp but are unable to get the keyboard backlight to work in 7 or 8. The backlight works perfect in os x 10.8.5 though. I need a little bit of help guys.....

    Go to Apple Menu / About This Mac. Click on More Info ... next on System Report. In the left hand column, under Hardware, select USB. The right side will show the USB Device Tree. Look through that and check for "Built-in iSight". That is your camera. If it is not listed the camera is not working.
    For backlighting, try this: go to System Preferences / Keyboard. Uncheck "Adjust keyboard lighting in low light".

  • Bluetooth, iSight and Keyboard Backlight not working. Please help!

    My Bluetooth stopped working along with my iSight and Keyboard Backlight. I first noticed the weird sign over the bluetooth icon, and it read "Bluetooth not available". I payed no attention to it for a while until I tried to take a picture with Photo Booth and I read "No camera found", for some reason I tried to dim the backlight on the keyboard and a blocked sign appeared under the brightness level, not letting me do anything (Later I was able to use the backlight with the LabTick app). I have tried everything. SMC, PRAM, NVRAM, logging as diferent and new users, booting in safe mode... every solution I have found on the internet has been tested by me. Then I read this about the Hardware Test solution, and surprisingly after performing the Hardware Test no problems were found! So basically my MacBook Pro (mid 2010) is not having any trouble of any sorts with anything. Then why can't I use Bluetooth, iSight or Key backlighting (which only works through LabTick). Given the fact that the hardware test shows no problems I am not comfortable with the idea of taking it to repair. There MUST be something I can actually do to fix these issues.
    Does anybody have any idea? I repeat, these are NOT WORKING, NOT FOUND AND NOT AVAILABLE.
    - Keyboard Backlight (Only works through LabTick)
    - iSight Camera (Not found by any software)
    - Bluetooth (No info appears on the system profile, the icon on the menu bar is completely gone)
    All three issues happened at the same time, the night before everything was working perfectly fine.
    If anyone could help... please!!!
    Summary:
    MacBook Pro Mid 2010 (http://support.apple.com/kb/SP583) Unibody, can't take out the battery.
    Solutions tried:
    - Reset SMC: Turning on while holding Shift + Ctrl + Option + Power Button (This makes my MacBook forget about the battery and start up with really loud fan noise, battery icon appears with an X on it, keyboard backlight buttons work, they show brightness level on screen, but the actual light won't work, no bluetooth, no isight)
    -Reset PRAM and NVRAM: Turning on while holding Option + CMD + R + P (I have waited for 2 chimes, 3 chimes and 4 chimes at different times, nothing happens. Light, bluetooth and isight are still gone)
    -Holding Power Button for 10 seconds, 20 seconds, longer... nothing changes.
    -Creating and logging in as new admin user, nothing changes.
    -Deleting the bluetooth.plist file and powering off and on again, also rebooting
    -Deleting the SystemConfiguration folder, powering off and on again, also rebooting
    -Installing "blueutil", didn't help at all, turned it off via terminal with command blueutil off.
    -Performing Apple Hardware Test - Shows no erros or problems on any area after one full hour of testing (Performed the extended testing)
    -Leaving it powered off overnight
    Please anyone help meee!! I can't afford going crazy!
    Thank you so much in advance!
    Alvarock.

    ****UPDATE***
    Hi guys i got across this forum after searching for bluetooth, front camera and the most ANNOYING no lost keyboard backligth.
    After run all the test, procedures, tweeks and, and everything i remenbered that once i sent my MBP to repair at you bring i break, turns out that the little ribbon flex connector coming from the mother board ( from the rigth to left) was loose since the adhesive wich they used shrink do temp changes, anyhow y popped out the glas and found the flex cable totally sticked to the glass pulling out of the pcb board connector, reinstalled it smoothly and that FIXED the camera, bluetooth and keyboard backlight!..
    thats it. hope i helped some frustraded owner.

  • Macbook Pro 17inch late 2011 keyboard backlight not working

    Recently near the end of sum me 2014 I only noticed the backlight keyboard not working at all. I have done the following to try and rectify;
    1. Reset SMC
    2. Rest NVRAM
    3. Disconnected battery and the above
    4. hardware test online, result showing no issues found.
    with all outcomes proving nil. Pressing Fn + F5 or F6 does show the brightness either increasing or decreasing but with no light. I then opened her up and disconnected a cable that was to the LHS of the RAM boards but this only powers the White Sleep LED and not the backlight keyboard on this 17inch model. My next step is to remove the mother board and find the actual cable that does power the backlight LEDs and ensure that it is connected. Similarly around the same time I noticed this with the backlights the fans were running fast. However the weather has gotten cooler and the mbp is not running fans as it was when it was in the warmer months.
    Do I have to remove the motherboard and actually make sure that the connector for the backlights hasn't been dislodged?
    Anyone out there with a 17inch mbp late 2011 that has had this problem please help.
    keyboard-backlight-less
    2.5Ghz Intel Core i7
    8GB Ram
    OSX 10.7.5
    SMC Veresion 1.70f5

    Thanks Ogelthorpe, I found an excellent video (not in english but it didnt matter) https://www.youtube.com/watch?v=8HNAGodYMNA .
    What I found was that the keyboard backlight is intergrated into the black plastic cover that is between the motherboard and the back of the keys/LEDS and its all one piece back to the connector that connects to the motherboard under the LHS fan. I need more details to find out if the LEDS are controlled by a chip or what, but it seems to me that I need to visit an apple store/repairer, however this will be really difficult for me as Im in an isolated location. If there are further tests that I can conduct on my own, I would be grateful. Even if there are tests that Apple themselves conduct to find out what the problem is
    Peter

  • Screen backlight and keyboard backlight not working

    Yesterday I turned on my old but proud PowerBook17" and the *screen was black*, but you could barely see everything. *Also keyboard backlight is not working.*
    I read many many forums and all say that black screen caused by inverter failure, but in my case keyboard lighting is also dead, so I wonder *if this is something different* and not the inverter.
    I would appreciate any advises or ideas cause I love this machine..
    Thank you in advance!

    Same problem here.  I initially thought the auto-brightness problem had been fixed in 10.7.3, but sadly it hasn't. The auto-brightness works when the Mac starts, but I find it loses control and fails after wake from sleep. 
    I have telephoned AppleCare several times but they are not aware of this bug.  They think a PRAM reset cures it, but it doesn't.  As soon as the machine goes to sleep then auto-brightness fails on wake.
    I have used the Apple Form to report the bug.  It might eventually get fixed if others would kindly report it as well please.  Here is the link:
    http://www.apple.com/feedback/macosx.html

  • Keyboard backlight not working on MBP 13in Mid-2010

    The backlight on my keyboard is no longer working. When my backlight 1st stopped working it allowed me to toggle the brightness level to no results (I even tired lab kit.) After I resetmy PRAM and SMC I couldn't even try to toggle the brightness. The illumination settings in System Preferences disappeared as well. Is there anyway to fix this without having to bring my computer into the Apple Store? I use this machine for both work and school and cannot be without it for a few days. I am currently running Lion.

    Are you under warranty? If so, call Apple and report the problem and get a case number. If your warranty is about to run out, it is important to get a case number to document that the problem first occurred under warranty so that Apple can eventually fix it under warranty.
    You have already tried the usual cures--resetting the SMC and checking your settings for the keyboard. If LabTick also does not work, then you likely have a hardware problem of some sort.
    It might be worth a trip to the genius bar to have them take a look at it and maybe run their hardware test, just to get a diagnosis and repair estimate. You can also ask how long the repair will take and see if there is any possibility of having  it repaired while you wait. Once you know what's wrong and what it might take to fix it, you can delay the actual repair until a time that is more convenient to you.
    Right now there's no way to tell what's wrong--it may even be something as simple as a cable that needs to be reseated. If so, it should not take long to fix.
    Good luck!

  • Keyboard backlight not working...

    Hi everyone!
    I am having a problem that appears to be shared by other Powerbook users who have the luxury of a backlight for their keyboard: I have updated OSX and now the option of automatic illumination has gone from the Keyboard and Mouse preferences window?
    Does anyone know how this can be fixed? I have only had my laptop for 13 months and so far my hard drive has died and the system has crashed completely three times, I would be devistated if this is the logic board now? If you think it is please lie!? Only joking of course, but if anyone has a neat solution I would love to know!
    I have already tried to set-up a new user, and have removed the com.applebezelservices.plist from the library, but no joy so far.
    I use this luxury lots, since I work at night. Any help would bring festive cheer to me and my children to be!!!
    Regards,
    Simon

    Same problem here with my powerbook 15" 1.5ghz.
    It seems that this problem is common with a lot of people as I can see from the forums that I went on.
    The ambient light sensor seems defective since a software update (probably the 10.4.7). Results are that the auto-dim of the screen does not work all the time, the keyboard no longer backlight up in dark condition and the sleeping status light blinks for no reason or it stays on when computer is open.
    I've tried to zap de PRAM and reset PMU with no results.
    I've read that some people has a loose connection between logic board ans ambient light sensor... could that be the reason as you mention taht they told you so?
    I've read that some people with the same problem had their Logic Board changed as they were under warranty... but for the rest of us that are not on the warranty anymore... no answers from Apple. I think that they should open a repair ticket and that everybody who has this problem should contact Apple

  • Keyboard backlight not working - settings missing on MacBook 2,1??

    I have a macbook 2,1 that was given to me by a friend about 6 months ago. It is in perfect condition except some seperation around the edges. So, I took into the Apple store a couple of days ago and they replaced the entire 'inside' of the macbook; meaning screen surround, keyboard and surrounding 'faceplate'. (Excuse the incorrect terminology) I also mentioned to them that the keyboard didn't have any backlighting (at least I have never seen it) and the tech said would also be repaired as a result of the keyboard replacement.
    ANYWAY, I am home and the keyboard backlight is still not working. I searched mac help and found the following:
    To set keyboard backlighting for a portable computer:
      Choose Apple menu > System Preferences, click Keyboard & Mouse, and then click Keyboard.Open the Keyboard pane of Keyboard & Mouse preferences
      To enable backlighting, select the “Illuminate keyboard in low light conditions” checkbox.If you want to automatically shut off the backlight when your computer is idle, drag the slider to indicate when to turn it off.
    The only thing I saw was an option for bluetooth - n/a, keyboard shortcuts settings to change shortcuts..obviously and the keyboard setting which only gives me the choice to
    1. change the key repeat rate 
    2. change the delay until repeat rate and 3. a box to check/uncheck if I want to use the f1, f2, etc as the standard function keys.
    There is also a button at the bottom left corner which says 'modify keys' which I believe is n/a.
    I should also probably mention, when searching help, it also said "The light sensors are located in your computer’s speaker grilles, so make sure the grilles are not covered when you use your computer in low light conditions" . I have no speaker grilles (that I can see) but my speakers work. and it says; "IF the keyboard on your computer can be backlighted, you can set it so the keys can be visible in lowlight conditions". I guess the keyword here being IF so maybe this mac isn't supported for that but I think that it is from what the person at the Apple store told me after looking up my serial number.
    Just to add, I did search the forum and found close to the same problems but with different types of macs so I thought I would ask. I am still learning the ins and outs of using Mac so I hope I asked the right questions and I'm not over expanding on the question too much.
    I am sure there is a simple explanation...maybe?! So if someone could enlighten me, I would be very grateful!!!!
    Thank you!!!!
    Sarah

    welcome

  • Satellite C50D-A-138 backlight not working

    Hi, I am having a major issue with my laptop. The backlight for the display will not work. I can only faintly see the picture. I tried adjusting brighness, no joy. It outputs fine to a monitor. I have tried replacing the screen and the connecting ribbon but the issue still presents itself. Does anyone have any ideas??? I am at a loss.
    Paul

    Hi
    Connect external monitor and check if the same display problem would appear on the external display.
    In case everything would appear properly on the external display, the problem must be the internal display panel.
    The notebook’s display panel seems to use a LED backlight as the light source.
    So probably the display’s backlight doesn’t function correctly. In such case the display panel must be replaced.
    You should ensure that you are using compatible panel because many notebook displays support different technology (TFT panels without backlight and display supporting backlight like the one build in the C50D-A)

  • T400 Backlight Not Working

    I got a Lenovo T400 and the backlight stopped working (LED). Anyone have any ideas?

    I am having a weird problem where every 1/8 or so LEDs is not working - it looks like a bad solder joint deal.  At the bottom of my screen I get a row of dark shadows that are evenly spaced apart.  I took this to a shop to fix a year ago, but now it's back.  If i pinch the lower right hand corner of the screen, the shadows will temporarily go away.  
    My computer is out of warrenty, should I just go ahead and open it up with a solder gun?
    Also, the pics you have of the screen would be great, so I can see what I'm looking for.  

  • TS1405 i pod nano 5 generation backlight not working

    Dear Friends,
    my i pod nano 5 generation backlight is not working.Suddenly it stops after recharged.All 5 Rs tried but failed to problem.
    I would highly appriciate for yr. help.
    REGARDS

    If the 5 R's of troubleshooting failed to resolve the issue, then it's likely hardware related, meaning you'll need to have your iPod serviced or replaced.
    B-rock

Maybe you are looking for

  • Can not copy/create order on mobile

    Hi All, I am unable to copy an existing sales order on the mobile device. Get the following error while saving copy of Sales Document Type - User Error Error Code - 235 Context - 2005 Description - Enter a value in the field PSTYV. (PSTYV = Sales doc

  • Ipod connection problems

    After a period of about a year of the ipod working properly, I started to have connection problems. My ipod isn't recognized as connected by windows when I connect it- and I often get "a device connected to a usb port has malfunctioned and is not rec

  • 8-Core 2.93Ghz 2009 Mac Pro - suddenly is s-l-o-w...

    Hey Guys - PC convert here, and familiar with the tools I would use to diagnose items that would cause a PC to slow down (spyware, malware, bloat, registry cracks, etc), as well as hardware associated with such, I am having a quandry with my 2009 8-c

  • Passing values to javascript from database

    hi friends, I have to fetch values from the database and pass the values to the java script variable. I tried this, but is not working. When i place the script inside the java, it isnt working. Iam passing value to this script variable as argument to

  • HP Officejet 4630 - How to get % Key on keypad

    I need to change to a new network.   I'm using the Wireless Setup Wizard.  I can't enter the password because I can't find the % sign.    I've tried everything I could find on HP forums and Internet search but I still can't find how to enter %.    I