I dropped my iPhone down a stairwell. It was in a case but the screen shattered. I replaced the screen with disaled iphone. Now it loses signal all the time, and goes into "searching" mode for cell signal.

iTunes says it needs to be restored to default to connect. When I restore it nothing changes. I get the same behavior. Below is my deivce log from the iPhone Config Utility. Hopefully someone can tell me if the phone is a wash.
==== Attached at 7/23/2012 11:56:40 PM ====
Jul 23 23:21:03 unknown configd[44] <Notice>: network configuration changed.
Jul 23 23:21:03 unknown configd[44] <Notice>: Captive: en0: Not probing 'can haz netz' (good signature)
Jul 23 23:21:03 unknown configd[44] <Notice>: network configuration changed.
Jul 23 23:21:04 unknown wifid[13] <Error>: WiFi:[364792864.449884]: Client itunesstored is background application
Jul 23 23:21:04 unknown ptpd[185] <Notice>: PTP interface has been activated at high speed.
Jul 23 23:21:06 unknown kernel[0] <Debug>: launchd[192] Builtin profile: syncdefaultsd (sandbox)
Jul 23 23:21:09 unknown configd[44] <Notice>: Captive: en0: Not probing 'can haz netz' (good signature)
Jul 23 23:21:09 unknown configd[44] <Notice>: network configuration changed.
Jul 23 23:21:09 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::endpointIOTimerExpired : IO stuck for endpoint 81, killing it
Jul 23 23:21:09 unknown kernel[0] <Debug>: GINTSTS=04008028 GINTMSK=a00c3800 GNPTXSTS=00080010 DAINT=00000000
Jul 23 23:21:09 unknown kernel[0] <Debug>: DAINTMSK=0015002b DCFG=00000010 DCTL=00000000 DSTS=0036ab00
Jul 23 23:21:09 unknown kernel[0] <Debug>: GRXFSIZ=0000021b GNPTXFSIZ=0010021b DPTXSIZ(1)=0040022b
Jul 23 23:21:09 unknown kernel[0] <Debug>: GAHBCFG=0000002b, GUSBCFG=00002c08, GRSTCTL=80000000
Jul 23 23:21:09 unknown kernel[0] <Debug>: DEPCTL   DEPINT   DEPTSIZ DEPDMA
Jul 23 23:21:09 unknown kernel[0] <Debug>: EP80 00008000 00000080 00000000 419c5004
Jul 23 23:21:09 unknown kernel[0] <Debug>: EP00 80028000 00000000 20080040 419c4000
Jul 23 23:21:09 unknown kernel[0] <Debug>: EP81 80888200 00000000 20080000 51dd700c
Jul 23 23:21:09 unknown kernel[0] <Debug>: EP83 004e8040 00002090 00000000 7617e65e
Jul 23 23:21:09 unknown kernel[0] <Debug>: EP85 00c98200 00002010 20000000 41f97068
Jul 23 23:21:09 unknown kernel[0] <Debug>: EP02 000a8200 00002010 00380ff4 4a03100c
Jul 23 23:21:09 unknown kernel[0] <Debug>: EP04 80088200 00000000 02008000 42011000
Jul 23 23:21:10 unknown configd[44] <Notice>: network configuration changed.
Jul 23 23:21:10 unknown UserEventAgent[12] <Warning>: DEBUG: Changing WiFi state: 1
Jul 23 23:21:10 unknown CommCenter[55] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 1
Jul 23 23:21:10 unknown SpringBoard[50] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Jul 23 23:21:10 unknown SpringBoard[50] <Notice>: MultitouchHID: detection mode: 0->255
Jul 23 23:21:10 unknown UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 1
Jul 23 23:21:11 unknown kernel[0] <Debug>: ALS: [AppleCT700] setPropertiesGated: requested ReportInterval=0 turn OFF sensor
Jul 23 23:21:13 unknown timed[194] <Notice>: (Note ) CoreTime: Received time 07/24/2012 03:21:13-0-.-0-0 -f-r-o-m -"-N-I-T-Z-"
Jul 23 23:21:13 unknown timed[194] <Notice>: (Note ) CoreTime: Not setting system time to 07/24/2012 03:21:13 from NTP because time is unchanged
Jul 23 23:21:13 unknown timed[194] <Notice>: (Note ) CoreTime: Want active time in 31.52hrs. Need active time in 114.85hrs.
Jul 23 23:21:13 unknown timed[194] <Notice>: (Note ) CoreTime: Received network time zone "NITZ" with 364792873.00 -240 DST 1 in 310
Jul 23 23:21:13 unknown timed[194] <Notice>: (Note ) CoreTime: Searching in DST time zone map for offset -240 and MCC 310
Jul 23 23:21:13 unknown timed[194] <Notice>: (Note ) CoreTime: Received timezone "America/New_York" from "NITZ"
Jul 23 23:21:13 unknown timed[194] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from NITZ
Jul 23 23:21:15 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::endpointIOTimerExpired : IO stuck for endpoint 81, killing it
Jul 23 23:21:15 unknown kernel[0] <Debug>: GINTSTS=04008028 GINTMSK=a00c3800 GNPTXSTS=00080010 DAINT=00000000
Jul 23 23:21:15 unknown kernel[0] <Debug>: DAINTMSK=0015002b DCFG=00000010 DCTL=00000000 DSTS=00131c00
Jul 23 23:21:15 unknown kernel[0] <Debug>: GRXFSIZ=0000021b GNPTXFSIZ=0010021b DPTXSIZ(1)=0040022b
Jul 23 23:21:15 unknown kernel[0] <Debug>: GAHBCFG=0000002b, GUSBCFG=00002c08, GRSTCTL=80000000
Jul 23 23:21:15 unknown kernel[0] <Debug>: DEPCTL   DEPINT   DEPTSIZ DEPDMA
Jul 23 23:21:15 unknown kernel[0] <Debug>: EP80 00008000 00000080 00000000 419c5004
Jul 23 23:21:15 unknown kernel[0] <Debug>: EP00 80028000 00000000 20080040 419c4000
Jul 23 23:21:15 unknown kernel[0] <Debug>: EP81 80888200 00000000 20080000 51dd700c
Jul 23 23:21:15 unknown kernel[0] <Debug>: EP83 004e8040 00002090 00000000 7617e65e
Jul 23 23:21:15 unknown kernel[0] <Debug>: EP85 00c98200 00002010 20000000 41f97068
Jul 23 23:21:15 unknown kernel[0] <Debug>: EP02 000a8200 00002010 00380ff4 4a03100c
Jul 23 23:21:15 unknown kernel[0] <Debug>: EP04 80088200 00000000 02008000 42011000
Jul 23 23:21:16 unknown kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(eng)::setLinkQualityMetricGated: Setting link quality metric to 100
Jul 23 23:21:16 unknown timed[194] <Notice>: (Note ) CoreTime: Want active time in 31.52hrs. Need active time in 114.85hrs.
Jul 23 23:21:21 unknown kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(eng)::dormancySetIntervalGated: Setting dormancy interval to 2500 ms with mask 0x1700
Jul 23 23:21:45 unknown profiled[183] <Notice>: (Note ) profiled: Idled.
Jul 23 23:21:45 unknown profiled[183] <Notice>: (Note ) profiled: Service stopping.
Jul 23 23:25:10 unknown CommCenter[55] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 1
Jul 23 23:26:21 unknown lockdownd[26] <Error>: libMobileGestalt computeUniqueDeviceID: total time for bb to return imei: 0
Jul 23 23:26:21 unknown lockdownd[26] <Notice>: 2ff90000 copy_phonenumber: CTSettingCopyMyPhoneNumber() returned NULL
Jul 23 23:26:21 unknown lockdownd[26] <Error>: libMobileGestalt copyMobileEquipmentIdentifier: No MEID in CT mobile equipment info dictionary - <CFBasicHash 0x1273b0 [0x3f71b650]>{type = mutable dict, count = 5,
entries =>
1 : <CFString 0x127460 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoCurrentSubscriberId"} = <CFString 0x1274a0 [0x3f71b650]>{contents = "310410418830324"}
2 : <CFString 0x127ec0 [0x3f71b650]>{contents= "kCTMobileEquipmentInfoCurrentMobileId"} = <CFString 0x127ef0 [0x3f71b650]>{contents = "012417009917339"}
4 : <CFString 0x1274e0 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoICCID"} = <CFString 0x127510 [0x3f71b650]>{contents = "89014104254188303245"}
11 : <CFString 0x127530 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoIMEI"} = <CFString 0x127ef0 [0x3f71b650]>{contents = "012417009917339"}
12 : <CFString 0x1275a0 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoIMSI"} = <CFString 0x1274a0 [0x3f71b650]>{contents = "310410418830324"}
Jul 23 23:26:21 unknown lockdownd[26] <Notice>: 2ff90000 copy_meid: MobileGestalt failed to provide an MEID but returned no error (?)
Jul 23 23:26:22 unknown atc[199] <Error>: libMobileGestalt computeUniqueDeviceID: total time for bb to return imei: 0
Jul 23 23:26:23 unknown wifid[13] <Error>: WiFi:[364793183.480799]: Client itunesstored is background application
Jul 23 23:26:24 unknown lockdownd[26] <Error>: libMobileGestalt computeUniqueDeviceID: total time for bb to return imei: 0
Jul 23 23:26:45 unknown lockdownd[26] <Notice>: 2ff90000 _receive_message: walk away - non-SSL 1
Jul 23 23:35:09 unknown configd[44] <Notice>: network configuration changed.
Jul 23 23:35:09 unknown kernel[0] <Debug>: AppleSerialMultiplexer: !! prot::handleReadData: Dumping 27.010 buffer (8 bytes):
Jul 23 23:35:09 unknown kernel[0] <Debug>: AppleSerialMultiplexer: !! prot::handleReadData: frameStart = 0, address = 31
Jul 23 23:35:09 unknown kernel[0] <Debug>: AppleSerialMultiplexer: !! buff(3260)::__log: length 8
Jul 23 23:35:09 unknown kernel[0] <Debug>: AppleSerialMultiplexer: !! buff(3260)::__log: chunk 0 (8/0xd07b5804):
Jul 23 23:35:09 unknown kernel[0] <Debug>: AppleSerialMultiplexer: !! buff(3260)::__log: 0000 7D 01 EF A1 0D 0A 2B 58                            }.....+X
Jul 23 23:35:09 unknown kernel[0] <Debug>: AppleSerialMultiplexer: !! mux-ad(eng)::fatalError: fatal error: kASMFatalErrorInvalidChannel (8): channel was 31
Jul 23 23:35:09 unknown kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(eng)::changeMuxStateGated: state change: Engaged -> Error
Jul 23 23:35:09 unknown kernel[0] <Debug>: AppleSerialMultiplexer: !! mux-ad(err)::bsdIoctl: Fatal error code=kASMFatalErrorInvalidChannel(8)
Jul 23 23:35:09 unknown kernel[0] <Debug>: AppleSerialMultiplexer: !! mux-ad(err)::validateAndGetMuxBsdInterface: Cannot perform Receive on Bypass when state is Error
Jul 23 23:35:09 unknown CommCenter[55] <Notice>: CSI state dump requested: AppleSerialMultiplexer Fatal Error: Code kASMFatalErrorInvalidChannel (8): channel was 31: snapshot: RESET_DET: Dunno, SPCLKCON 0x1, SPCON 0xd405a, SPSTA 0x160410, SPCNT 0x128, SPTDCNT 0x127 - Protocol: MRDY Low, SRDY High(Select Exception)
Jul 23 23:35:10 unknown kernel[0] <Debug>: AppleSerialMultiplexer: !! mux-ad(err)::validateAndGetMuxBsdInterface: Cannot perform Receive on Bypass when state is Error
Jul 23 23:35:10 unknown CommCenter[55] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 0
Jul 23 23:35:10 unknown lockdownd[26] <Notice>: 3ec2cd98 lookup_baseband_info_old: The SIM status has changed
Jul 23 23:35:10 unknown lockdownd[26] <Notice>: 3ec2cd98 load_activation_records: Could not extract ICCID from record
Jul 23 23:35:10 unknown lockdownd[26] <Notice>: 3ec2cd98 load_activation_records: This is a wildcard record
Jul 23 23:35:10 unknown lockdownd[26] <Notice>: 3ec2cd98 copy_activation_record: No unlock record. Looking for a care flag.
Jul 23 23:35:10 unknown lockdownd[26] <Notice>: 3ec2cd98 copy_activation_record: No care flag. Looking for a record that matches the SIM.
Jul 23 23:35:10 unknown lockdownd[26] <Notice>: 3ec2cd98 copy_activation_record: Looking up the record for ICCID 89014104254188303245
Jul 23 23:35:10 unknown lockdownd[26] <Notice>: 3ec2cd98 copy_activation_record: No record for the SIM. Looking for wildcard.
Jul 23 23:35:10 unknown SpringBoard[50] <Error>: mms: ***** isMmsConfigured = 1
Jul 23 23:35:11 unknown timed[205] <Notice>: (Note ) CoreTime: Received source unavailable from "NITZ"
Jul 23 23:35:11 unknown timed[205] <Notice>: (Note ) CoreTime: Not setting system time to 07/24/2012 03:35:11 from NTP because time is unchanged
Jul 23 23:35:11 unknown timed[205] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from NITZ
Jul 23 23:35:11 unknown timed[205] <Notice>: (Note ) CoreTime: Want active time in 31.28hrs. Need active time in 114.62hrs.
Jul 23 23:35:11 unknown lockdownd[26] <Notice>: 3ec2cd98 determine_activation_state_old: This device is a phone. It supports factory activation.
Jul 23 23:35:11 unknown lockdownd[26] <Error>: libMobileGestalt computeUniqueDeviceID: total time for bb to return imei: 0
Jul 23 23:35:11 unknown lockdownd[26] <Notice>: 3ec2cd98 determine_activation_state_old: The original activation state is WildcardActivated
Jul 23 23:35:11 unknown lockdownd[26] <Notice>: 3ec2cd98 determine_activation_state_old: SIM status: kCTSIMSupportSIMStatusNotReady
Jul 23 23:35:11 unknown lockdownd[26] <Notice>: 3ec2cd98 determine_activation_state_old: No ICCID in the activation record
Jul 23 23:35:11 unknown lockdownd[26] <Notice>: 3ec2cd98 determine_activation_state_old: The record contains a wildcard ticket
Jul 23 23:35:11 unknown lockdownd[26] <Notice>: 3ec2cd98 deliver_baseband_ticket: SIM is not in operator locked state. Ignoring activation ticket
Jul 23 23:35:11 unknown lockdownd[26] <Notice>: 3ec2cd98 determine_activation_state_old: The activation state has not changed.
Jul 23 23:35:11 unknown lockdownd[26] <Error>: libMobileGestalt computeUniqueDeviceID: total time for bb to return imei: 0
Jul 23 23:35:11 unknown lockdownd[26] <Notice>: 00299000 copy_phonenumber: CTSettingCopyMyPhoneNumber() returned NULL
Jul 23 23:35:11 unknown lockdownd[26] <Error>: libMobileGestalt copyMobileEquipmentIdentifier: No MEID in CT mobile equipment info dictionary - <CFBasicHash 0x11b710 [0x3f71b650]>{type = mutable dict, count = 5,
entries =>
1 : <CFString 0x11b7c0 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoCurrentSubscriberId"} = <CFString 0x145d20 [0x3f71b650]>{contents = "310410418830324"}
2 : <CFString 0x11b6e0 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoCurrentMobileId"} = <CFString 0x1393a0 [0x3f71b650]>{contents = "012417009917339"}
4 : <CFString 0x11b470 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoICCID"} = <CFString 0x1329f0 [0x3f71b650]>{contents = "89014104254188303245"}
11 : <CFString 0x11b4a0 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoIMEI"} = <CFString 0x1393a0 [0x3f71b650]>{contents = "012417009917339"}
12 : <CFString 0x11b4d0 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoIMSI"} = <CFString 0x145d20 [0x3f71b650]>{contents = "310410418830324"}
Jul 23 23:35:11 unknown lockdownd[26] <Notice>: 00299000 copy_meid: MobileGestalt failed to provide an MEID but returned no error (?)
Jul 23 23:35:11 unknown timed[205] <Notice>: (Note ) CoreTime: Received timezone "America/New_York" from "Location"
Jul 23 23:35:11 unknown timed[205] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from Location
Jul 23 23:35:11 unknown kernel[0] <Debug>: AppleBaseband::resetDetectInterrupt with 1
Jul 23 23:35:13 unknown CommCenter[55] <Notice>: Baseband reset:
Jul 23 23:35:13 unknown CommCenter[55] <Error>: _ReInitThrottleTimer(): Clearing throttle timer on context ID [0xffffffff] at 364793713.503971
Jul 23 23:35:13 unknown CommCenter[55] <Notice>: START LOCATION UPDATE
Jul 23 23:35:13 unknown CommCenter[55] <Notice>: STOP LOCATION UPDATE
Jul 23 23:35:14 unknown timed[205] <Notice>: (Note ) CoreTime: Want active time in 31.28hrs. Need active time in 114.62hrs.
Jul 23 23:45:20 unknown SpringBoard[50] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Jul 23 23:45:20 unknown UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 0
Jul 23 23:45:20 unknown SpringBoard[50] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Jul 23 23:45:21 unknown CommCenter[55] <Notice>: CSI state dump requested: No response from modem
Jul 23 23:45:21 unknown SpringBoard[50] <Notice>: MultitouchHID: device bootloaded
Jul 23 23:45:21 unknown SpringBoard[50] <Notice>: MultitouchHID: detection mode: 0->0
Jul 23 23:45:21 unknown kernel[0] <Debug>: set_crc_notification_state 0
Jul 23 23:45:43 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(1)
Jul 23 23:45:43 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
Jul 23 23:46:43 unknown SpringBoard[50] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Jul 23 23:46:43 unknown SpringBoard[50] <Notice>: MultitouchHID: detection mode: 0->255
Jul 23 23:46:43 unknown UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 1
Jul 23 23:46:43 unknown profiled[212] <Notice>: (Note ) profiled: Service starting...
Jul 23 23:46:43 unknown profiled[212] <Notice>: (Note ) profiled: Locking device
Jul 23 23:46:44 unknown kernel[0] <Debug>: ALS: [AppleCT700] setPropertiesGated: requested ReportInterval=0 turn OFF sensor
Jul 23 23:46:44 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
Jul 23 23:46:54 unknown kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(nr)::dormancySetIntervalGated: Setting dormancy interval to 2500 ms with mask 0x1700
Jul 23 23:46:54 unknown kernel[0] <Debug>: AppleKeyStore:timer fired
Jul 23 23:46:54 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(0)
Jul 23 23:46:54 unknown kernel[0] <Debug>: AppleKeyStore:Removing timer
Jul 23 23:46:54 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
Jul 23 23:47:24 unknown timed[213] <Notice>: (Note ) CoreTime: Want active time in 31.08hrs. Need active time in 114.41hrs.
Jul 23 23:47:34 unknown timed[213] <Notice>: (Note ) CoreTime: Not setting system time to 07/24/2012 03:47:34 from NTP because time is unchanged
Jul 23 23:47:34 unknown timed[213] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from Location
Jul 23 23:47:43 unknown profiled[212] <Notice>: (Note ) profiled: Idled.
Jul 23 23:47:43 unknown profiled[212] <Notice>: (Note ) profiled: Service stopping.
Jul 23 23:53:50unknown notification_proxy[198] <Error>: Could not receive size of message: 0 Invalid argument
Jul 23 23:53:50 unknown notification_proxy[198] <Error>: Could not receive message
Jul 23 23:54:38 unknown iapd[38] <Warning>: ERROR - /SourceCache/iapd/iapd-813.55.20/IAPPortManager.mm:-[IAPPortManager availableCurrentFromAccInMa] - 271 IOAccessoryManagerGetUSBCurrentLimitBase failed 0xe00002d9
Jul 23 23:54:38 unknown notification_proxy[200] <Error>: Could not receive size of message: 0 Invalid argument
Jul 23 23:54:38 unknown notification_proxy[200] <Error>: Could not receive message
Jul 23 23:54:38 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state pluggedin_screen_on even though we are not in it, doing nothing
Jul 23 23:54:38 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state pluggedin_charging even though we are not in it, doing nothing
Jul 23 23:54:38 unknown SpringBoard[50] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Jul 23 23:54:38 unknown UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 0
Jul 23 23:54:38 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state unplugged_screen_on even though we are not in it, doing nothing
Jul 23 23:54:38 unknown ptpd[185] <Notice>: PTP interface has been deactivated.
Jul 23 23:54:38 unknown SpringBoard[50] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Jul 23 23:54:38 unknown UserEventAgent[12] <Warning>: DEBUG: Changing powered state: 0
Jul 23 23:54:38 unknown SpringBoard[50] <Notice>: MultitouchHID: device bootloaded
Jul 23 23:54:38 unknown SpringBoard[50] <Notice>: MultitouchHID: detection mode: 0->0
Jul 23 23:54:39 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state unplugged_asleep even though we are not in it, doing nothing
Jul 23 23:54:39 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state unplugged_screen_off even though we are not in it, doing nothing
Jul 23 23:54:39 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state pluggedin_screen_off even though we are not in it, doing nothing
Jul 23 23:54:39 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 0
Jul 23 23:54:39 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType Detached
Jul 23 23:54:39 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
Jul 23 23:54:39 unknown kernel[0] <Debug>: virtual IOReturn AppleUSBDeviceMux::message(UInt32, IOService*, void*) - kMessageInterfaceWasDeActivated
Jul 23 23:54:39 unknown kernel[0] <Debug>: AppleUSBDeviceMux::reportStats: USB mux statistics:
Jul 23 23:54:39 unknown kernel[0] <Debug>: USB mux: 276 reads / 0 errors, 464 writes / 0 errors
Jul 23 23:54:39 unknown kernel[0] <Debug>: USB mux: 0 short packets, 0 dups
Jul 23 23:54:39 unknown kernel[0] <Debug>: set_crc_notification_state 0
Jul 23 23:54:39 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 1
Jul 23 23:54:39 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType USBHost
Jul 23 23:54:39 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state pluggedin_screen_off even though we are not in it, doing nothing
Jul 23 23:54:39 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state pluggedin_charging even though we are not in it, doing nothing
Jul 23 23:54:39 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state unplugged_screen_off even though we are not in it, doing nothing
Jul 23 23:54:40 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 0
Jul 23 23:54:40 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType Detached
Jul 23 23:54:40 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
Jul 23 23:54:44 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(1)
Jul 23 23:54:44 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
Jul 23 23:54:58 unknown iapd[38] <Warning>: Model Number: 4
Jul 23 23:54:58 unknown iapd[38] <Warning>: MFG:
Jul 23 23:54:58 unknown iapd[38] <Warning>: Model:
Jul 23 23:54:58 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state unplugged_asleep even though we are not in it, doing nothing
Jul 23 23:54:58 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state unplugged_screen_off even though we are not in it, doing nothing
Jul 23 23:54:58 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state pluggedin_screen_off even though we are not in it, doing nothing
Jul 23 23:54:58 unknown iapd[38] <Warning>: Model Number: 4
Jul 23 23:54:58 unknown iapd[38] <Warning>: MFG:
Jul 23 23:54:58 unknown iapd[38] <Warning>: Model:
Jul 23 23:54:59 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 1
Jul 23 23:54:59 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType USBHost
Jul 23 23:54:59 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBReset
Jul 23 23:54:59 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBReset
Jul 23 23:54:59 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 0
Jul 23 23:54:59 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType Detached
Jul 23 23:54:59 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
Jul 23 23:54:59 unknown iapd[38] <Warning>: ERROR - /SourceCache/iapd/iapd-813.55.20/IAPPortManager.mm:-[IAPPortManager availableCurrentFromAccInMa] - 271 IOAccessoryManagerGetUSBCurrentLimitBase failed 0xe00002d9
Jul 23 23:54:59 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state pluggedin_screen_off even though we are not in it, doing nothing
Jul 23 23:54:59 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state pluggedin_charging even though we are not in it, doing nothing
Jul 23 23:54:59 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state unplugged_screen_off even though we are not in it, doing nothing
Jul 23 23:55:05 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state unplugged_asleep even though we are not in it, doing nothing
Jul 23 23:55:05 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state unplugged_screen_off even though we are not in it, doing nothing
Jul 23 23:55:05 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state pluggedin_screen_off even though we are not in it, doing nothing
Jul 23 23:55:06 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 1
Jul 23 23:55:06 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType USBHost
Jul 23 23:55:06 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBReset
Jul 23 23:55:06 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBReset
Jul 23 23:55:06 unknown UserEventAgent[12] <Warning>: DEBUG: Changing powered state: 1
Jul 23 23:55:07 unknown lockdownd[26] <Error>: libMobileGestalt computeUniqueDeviceID: total time for bb to return imei: 0
Jul 23 23:55:07 unknown lockdownd[26] <Notice>: 2ff90000 copy_phonenumber: CTSettingCopyMyPhoneNumber() returned NULL
Jul 23 23:55:07 unknown lockdownd[26] <Error>: libMobileGestalt copyMobileEquipmentIdentifier: No MEID in CT mobile equipment info dictionary - <CFBasicHash 0x11c730 [0x3f71b650]>{type = mutable dict, count = 5,
entries =>
1 : <CFString 0x11b890 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoCurrentSubscriberId"} = <CFString 0x132890 [0x3f71b650]>{contents = "310410418830324"}
2 : <CFString 0x11c700 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoCurrentMobileId"} = <CFString 0x139db0 [0x3f71b650]>{contents = "012417009917339"}
4 : <CFString 0x11c760 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoICCID"} = <CFString 0x11a9b0 [0x3f71b650]>{contents = "89014104254188303245"}
11 : <CFString 0x11b8d0 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoIMEI"} = <CFString 0x139db0 [0x3f71b650]>{contents = "012417009917339"}
12 : <CFString 0x134970 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoIMSI"} = <CFString 0x132890 [0x3f71b650]>{contents = "310410418830324"}
Jul 23 23:55:07 unknown lockdownd[26] <Notice>: 2ff90000 copy_meid: MobileGestalt failed to provide an MEID but returned no error (?)
Jul 23 23:55:07 unknown ptpd[218] <Notice>: PTP interface has been activated at high speed.
Jul 23 23:55:07 unknown kernel[0] <Debug>: launchd[218] Builtin profile: ptpd (sandbox)
Jul 23 23:55:07 unknown lockdownd[26] <Error>: libMobileGestalt computeUniqueDeviceID: total time for bb to return imei: 0
Jul 23 23:55:08 unknown atc[224] <Error>: libMobileGestalt computeUniqueDeviceID: total time for bb to return imei: 0
Jul 23 23:55:08 unknown wifid[13] <Error>: WiFi:[364794908.966216]: Client itunesstored is background application
Jul 23 23:55:13 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::endpointIOTimerExpired : IO stuck for endpoint 81, killing it
Jul 23 23:55:13 unknown kernel[0] <Debug>: GINTSTS=04008028 GINTMSK=a00c3800 GNPTXSTS=00080010 DAINT=00000000
Jul 23 23:55:13 unknown kernel[0] <Debug>: DAINTMSK=0015002b DCFG=00000010 DCTL=00000000 DSTS=00191900
Jul 23 23:55:13 unknown kernel[0] <Debug>: GRXFSIZ=0000021b GNPTXFSIZ=0010021b DPTXSIZ(1)=0040022b
Jul 23 23:55:13 unknown kernel[0] <Debug>: GAHBCFG=0000002b, GUSBCFG=00002c08, GRSTCTL=80000000
Jul 23 23:55:13 unknown kernel[0] <Debug>: DEPCTL   DEPINT   DEPTSIZ DEPDMA
Jul 23 23:55:13 unknown kernel[0] <Debug>: EP80 00008000 00000080 00000000 419c5004
Jul 23 23:55:13 unknown kernel[0] <Debug>: EP00 80028000 00000000 20080040 419c4000
Jul 23 23:55:13 unknown kernel[0] <Debug>: EP81 80888200 00000000 20080000 51e5700c
Jul 23 23:55:13 unknown kernel[0] <Debug>: EP83 004e8040 00002090 00000000 7617e65e
Jul 23 23:55:13 unknown kernel[0] <Debug>: EP85 00c98200 00002010 20000000 41f78238
Jul 23 23:55:13 unknown kernel[0] <Debug>: EP02 000a8200 00002010 00380ff4 4b4d900c
Jul 23 23:55:13 unknown kernel[0] <Debug>: EP04 80098200 00000000 02008000 42009000
Jul 23 23:55:18 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::endpointIOTimerExpired : IO stuck for endpoint 81, killing it
Jul 23 23:55:18 unknown kernel[0] <Debug>: GINTSTS=04008028 GINTMSK=a00c3800 GNPTXSTS=00080010 DAINT=00000000
Jul 23 23:55:18 unknown kernel[0] <Debug>: DAINTMSK=0015002b DCFG=00000010 DCTL=00000000 DSTS=00357b00
Jul 23 23:55:18 unknown kernel[0] <Debug>: GRXFSIZ=0000021b GNPTXFSIZ=0010021b DPTXSIZ(1)=0040022b
Jul 23 23:55:18 unknown kernel[0] <Debug>: GAHBCFG=0000002b, GUSBCFG=00002c08, GRSTCTL=80000000
Jul 23 23:55:18 unknown kernel[0] <Debug>: DEPCTL   DEPINT   DEPTSIZ DEPDMA
Jul 23 23:55:18 unknown kernel[0] <Debug>: EP80 00008000 00000080 00000000 419c5004
Jul 23 23:55:18 unknown kernel[0] <Debug>: EP00 80028000 00000000 20080040 419c4000
Jul 23 23:55:18 unknown kernel[0] <Debug>: EP81 80888200 00000000 20080000 51e5700c
Jul 23 23:55:18 unknown kernel[0] <Debug>: EP83 004e8040 00002090 00000000 7617e65e
Jul 23 23:55:18 unknown kernel[0] <Debug>: EP85 00c98200 00002010 20000000 41f78238
Jul 23 23:55:18 unknown kernel[0] <Debug>: EP02 000a8200 00002010 00380ff4 4b4d900c
Jul 23 23:55:18 unknown kernel[0] <Debug>: EP04 80098200 00000000 02008000 42009000
Jul 23 23:55:28 unknown notification_proxy[223] <Error>: Could not receive size of message: 0 Invalid argument
Jul 23 23:55:28 unknown notification_proxy[223] <Error>: Could not receive message
Jul 23 23:55:36 unknown notification_proxy[222] <Error>: Could not receive size of message: 0 Invalid argument
Jul 23 23:55:36 unknown notification_proxy[222] <Error>: Could not receive message
Jul 23 23:55:52 unknown lockdownd[26] <Notice>: 015da000 copy_phonenumber: CTSettingCopyMyPhoneNumber() returned NULL
Jul 23 23:55:52 unknown mc_mobile_tunnel[233] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jul 23 23:55:52 unknown mc_mobile_tunnel[233] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jul 23 23:55:52 unknown mc_mobile_tunnel[234] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jul 23 23:55:52 unknown mc_mobile_tunnel[234] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jul 23 23:55:52 unknown lockdownd[26] <Notice>: 015da000 set_response_error: handle_start_session SessionActive
Jul 23 23:56:06 unknown SpringBoard[50] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Jul 23 23:56:06 unknown SpringBoard[50] <Notice>: MultitouchHID: detection mode: 0->255
Jul 23 23:56:06 unknown kernel[0] <Debug>: ALS: [AppleCT700] setPropertiesGated: requested ReportInterval=0 turn OFF sensor
Jul 23 23:56:06 unknown UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 1
Jul 23 23:56:06 unknown profiled[237] <Notice>: (Note ) profiled: Service starting...
Jul 23 23:56:06 unknown profiled[237] <Notice>: (Note ) profiled: Locking device
Jul 23 23:56:07 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
Jul 23 23:56:07 unknown mc_mobile_tunnel[239] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jul 23 23:56:07 unknown mc_mobile_tunnel[239] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jul 23 23:56:16 unknown kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(nr)::dormancySetIntervalGated: Setting dormancy interval to 2500 ms with mask 0x1700
Jul 23 23:56:17 unknown kernel[0] <Debug>: AppleKeyStore:timer fired
Jul 23 23:56:17 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(0)
Jul 23 23:56:17 unknown kernel[0] <Debug>: AppleKeyStore:Removing timer
Jul 23 23:56:17 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change

Obviously your phone was damaged by the fall. Take it in for evaluation, servicing and/or replacement at an Apple store or authorized service provider.
Since it is out of warranty you will, most likely, have to pay.

Similar Messages

Downloaded ios8 to iPad air. Now I can't download new or purchased apps. It seems to hang up each time and goes into waiting mode.

NEw iPad air won't download apps after installing ios8. Hangs up in waiting mode

This is still happening after a week. Kind of annoying to only be able to get updates through my PC.
Here is the message I get on my iPad2:
Sign in to the iTunes Store
If you have an Apple ID, sign in with it here. AOL members can sign in using their AOL username and password.
Cancel/Buy
The Cancel/Buy are the two button choices. If I click cancel it cancels. If I click buy it shows the same message.
Again, I'm already signed in, can buy and download new apps, but cannot download updates or previously purchased apps. Yes, I can download those two things through my PC, but would like a solution to this regardless.
I've tried:
-signing out and signing in
-same thing, but powering down my ipad in between
-same thing but also setting the date forward in between (heard this works for some people)
I'm still thinking it will "fix itself" at some point, but who knows.

I am about to go get my 4th iphone 4s since November! Up in the left coener where it shows your signal strength, it goes into searching mode and stays there. Kills my battery. This one has lasted the longest-I got it December 23. Any ideas out there?

I am about to go get my 4th iphone 4s since November! Up in the left corner where it shows your signal strength, it goes into searching mode and stays there. Kills my battery. While in searching, no calls can be made/recieved, no internet, etc. This one has lasted the longest-I got it December 23. Any ideas out there?

Both. The first two, I did use my itunes. The guy at the apple store said that could be the problem. The last time they gave me a new phone and SIM card, and the tech said it wouldnt be the itunes. Just to be safe, I never connected this phone to the itunes until last night-after it started searching- to save everything since I'm sure they will be replacing the phone today. But hey, thanks for the suggestions. I'm about at my wits end with Apple!! Especially since i added a third line to my account just so I could get an iphone back.

HT1267 I have a factory unlocked Iphone 4S, it worked fine but it was lossing the signal and going into search, I decided to restore, but now can not activate it, a message can not be activated because the server is temporary unavailable try again later??

I have a factory unlocked Iphone 4S, it worked fine but it was often lossing signal and going into search, I decided to restore, but now can not activate it, a message can not be activated because the server is temporary unavailable try again later, I have tried this for 3 days, any suggestions?

yes did you buy it of somebody or a well known company such as apple or carphone warehouse?
and i mean the phone would have been activated in the first place with the sim card you get given when you first get the phone.
trying to activate the phone with another sim card that you did not get when you brought the phone may result in you not being able to activate it
no worries

My macbook boots up and only stays on for 30sec and goes into sleep mode

My macbook boots up and only stays on for 30sec and goes into sleep mode! Any suggestions as to why this might be happening? Thanks....

I assume you have checked your sleep settings in System Preferences>Energy saver
I also assume this has just happened recently and spontaneously, not after installing any particular hardware or software or you would probably have mentioned it...if anything new has been added recently, obviously just remove it!
It could be the battery - have your tried it just on mains? If it's a pre unibody MacBook try it without the battery at all. This could happen if you have a non-Apple (cheap Chinese) replacement battery.
Try NVRAM, PRAM & SMC resets (Google if you don't know how)
Try booting from the install media and repairing or reinstalling OS X. (Back up first!)
Just out of interest if you boot from a DVD or go into Open Firmware or Boot Select modes, does it still sleep after 30 seconds or is it just in OS X?

Streaming audio from my IPAD to my Apple TV from Rhapsody application. when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode.

I am Streaming audio from my IPAD to my Apple TV from Rhapsody application. when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode. I am using the Optical Out from the Apple TV to my receiver, the Apple TV is hard Wired to the Network, the IPAD is Wirelessly attached to the network (it continues to play the Audio Stream). When the Apple TV is turned back on it resumes playing once I manual select it for output from the IPAD. All device are on current releases of software. I have no Video hooked up to the Apple TV. How do I correct this?

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

Unable to view invoices and going into enter mode.

Dear all,
Under the Receivables Inquiry responsibility in the AR transaction forms (view invoice).
Unable to view invoices and going into enter mode.
Please help to debug this issue.
Thanks for your help in advance.
With Regards,
Sunil Kumar Mallina.

Please post the details of the application release, database version and OS.
Under the Receivables Inquiry responsibility in the AR transaction forms (view invoice).
Unable to view invoices and going into enter mode. Was this working before? If yes, any changes have been done recently?
Do you get any error? Please elaborate more.
Thanks,
Hussein

Apple tv loses home sharing when my computer goes into sleep mode

Just recently, my Apple TV says that home sharing is off when my computer goes into sleep mode. It never used to do that - any suggestions?

I have the same problem here. Always back-ed up with Time Machine (OSX 10.9 Mavericks) to Western Digital drives. MyBooks, MyPassport 1TB (USB 3.0), all works fine. Time Machine is actually doing back-ups overnight. Since I got this new 2TB MyPassport Ultra USB 3.0 it's working perfect during days, but every morning when I wake up the MacBook from sleep, I get this annoying error:
Time Machine couldn’t complete the backup to “MyPassportUltra”.
Unable to complete backup. An error occurred while creating the backup folder.
Latest successful backup: Today, 02:27 am
I'm also not able to write anything to that drive, or unmount it. It stil shows up in Finder, and I'm able to read all the data perfectly fine. When I do a Disk Utility Verify Disk directly after, I get this:
Checking volume
disk3s2: Scan for Volume Headers
Invalid Volume Header @ 0: I/O error
Invalid Volume Header @ 2000021315072: I/O error
disk3s2 is not a CoreStorage volume
Error: This disk needs to be repaired. Click Repair Disk.
I don't click Repair Disk, as this will probably screw up my partition. Instead, I have to unplug the USB cable (which is bad for the drive, there's no time to park the drive's heads) and plug it in again. After clicking Backup Now, Time Machine immediately starts backing up, and the drive works fine the rest of the day.
I contacted WD Support, and they are sending me a booster USB cable. As System Information reports, the drive receives enough power though:
Current Available (mA): 900
Current Required (mA): 224
Unfortunately there's no firmware update for this drive, which will probably fix this. See this topic: https://discussions.apple.com/thread/4196704.

7515 Photosmart all-in-one goes offline every time it goes into powersave mode

I bought the Costco Photosmart all-in-one 7515 and it worked fine for a long time. For the last several months, every time it goes into power save mode, it goes offline and will not wake back up until you go into the wireless settings and even then, it has to be disconnected and reconnected in order to come back online. I haved checked for updates and downloaded the printer test app and it still goes offline when it goes into power save mode. Is there any way to disable the power save mode. When it goes offline, you can still ping it, so I am at a loss.

Hello @earldoe , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing connectivity issues. I would like to help.
I would recommend that you turn off UPnP, and set the router channel width to 20mhz.
For more information, I have included an article below:
10 Wireless Router Features.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HT3205 mac going into sleep mode for no reason

my mac is playing up. Every time I open it, the screen will appear briefly then flash off as if I have put it on sleep mode. When I close the top and re-open it it does the same thing again, sometimes it works for a while, but will turn itself off again after a few mintues.
I have tried charging it, turning it off etc and nothing seems to be working. Does anyone know what this means and could help me please?

Problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset:
Resetting the System Management Controller (SMC)
Resetting the SMC on Mac portables with a battery you can remove
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery (to remove the battery - click here: MacBook or MacBook Pro).
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.
Resetting the SMC on portables with a battery you should not remove on your own
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.

Firefox goes into offline mode for no reason

Periodically, with no consistency I can detect, Firefox puts itself into offline mode. After clicking the "try again" button from one to several times, it finally recognizes that there is in fact an Internet, and deigns to connect with it. I have never manually put Firefox into offline mode.

You can try to create a new Boolean pref with the name network.manage-offline-status and set the value to false.
You can right-click on the about:config page to open the right-click context menu and use "New > Boolean" to create a new Boolean pref.
Name: network.manage-offline-status<br />
Value: false<br />

Ipod is dead, only resets and goes into disk mode

I own a 4g ipod 20gb. It had been working fine. A week ago, I put it to sleep, and when it woke up it kerp flashing the broken folder icon and then reseting. I cound not mount it. By pressing the foreward button, I would get into disk mode.
Connecting to a computer got it to say
"disk mode-do not disconnect" but it would not mount/ appear in disk utility. Somehow, I got it to finally work and formatted and reset the firmware on a friends windows comp. It worked fine once, then the same thing happened. After taking it off my mac, it will say "ok to disconnect" and freezes there
anyone have a sugestion?
ps...I got it replaced a month ago in warrenty, but now that is up. Can I still send it back (warranty on the replacement?) thanx

Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/ipod/download/
http://www.apple.com/itunes/download/
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iPod Updater and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iPod Updater and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“Partition Magic”.
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.

My Iphone 4S goes into search mode (no service)about once every week or two and the only thing that will temporaraly fix it is to do a complete restore from new. Apple has given me 2 new phones plus new sim card, I've spent hours with customedr support...

Has anyone else had this issue? I can't continue to reset my phone, it takes over an hour each time to reset and re enter all the settings and email accts. If I'm out of town when it happens, I have no phone till I get back home. I asume it must be a software problem, I've deleted most of my apps, don't know what else to do

I have the same problem ios 5.0.2 will resolve the issue.

IPhone 5 going into recovery mode

My iphone has been continously shutting off and going into recovery mode. I sometimes can get lucky and turn it back on, but my phone will randomly freeze and turn off again. I have just restored my phone this morning, and minutes after I got it up and running it shut off again. Sometimes the apple logo appears and just fades to black. I have not jailbroken or tampered with this phone in any way. It has also not been dropped. It is still under warranty, so I am thinking about replacing it. Any suggestions? Is there a known cause for this problem? Thanks.

When you restored it did your restore from a back up? Try restoring it to factory settings! If the issue/problem was in the software it could be in the backup and when you restore and put the back up on the phone you are just putting the problem right back on....

IPod touch 1st gen goes into recovery mode after shut down or lock

Alright, so I bought a used iPod touch 1st gen from a friend. It was working fine for a few weeks until it started shutting off and going into recovery mode when I locked or turned it off. When off, half of the times I can do a hard reatart and hold the home and hold buttonsand it will turn on. The other times it will just come up with a white screen. When I plug it into my computer, it says it has to be restored. And this is an ongoing loop that I cannot seem to fix. I looked up my serial number and it says it's out of warranty.
So my first question is, is there anyway I personally can fix this problem, or do I have to take it to Apple? My second question is, what are their policies on iPods that were bought used from someone else? And is there a way for me to get a warranty on it to get it repaired if I can't fix it myself or do I have to pay full price on replacement or repairs?

Welcome to Apple Discussions
Did you let iTunes restore it? Has the problem continued? The article below discusses how to put your iPod into a recovery mode so you can fix it.
http://support.apple.com/kb/HT1808
As to your warranty, you no longer have one. Apple will, for a fee, repair your iPod if it needs repairing. There are independent shops who can do it as well - just Google them.

I dropped my iPhone down a stairwell. It was in a case but the screen shattered. I replaced the screen with disaled iphone. Now it loses signal all the time, and goes into "searching" mode for cell signal.

Similar Messages

Maybe you are looking for