I dropped my iPhone in a sink doesn't work at all what do I do

Please I had important stuff on this phone help

If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these.

Similar Messages

  • HT1349 I updated my IGO primo, and now it doesn't work at all. what can you advise me

    I updated my IGO primo, and now it doesn't work at all. what can you advice me now?

    If it's stuck on the Apple logo, you'll have to force it into recovery mode and restore it.  See http://support.apple.com/kb/ht1808.

  • My home button doesn't work at all, what should I do to close my apps?

    The home button on my iPod doesn't work at all, even wen I press on it really hard. Any suggestions on what I should do?

    Try:
    http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • HT201210 I dropped my iPhone 5 and it doesn't turn on it just shows the apple and says to plug into iTunes.. then i restore it and it says error , what do i do to get my phone to turn on fully ?

    helpppp
    I dropped my iPhone 5 and it doesn't turn on it just shows the apple and says to plug into iTunes.. then i restore it and it says error , what do i do to get my phone to turn on fully ?

    See if this helps: http://support.apple.com/kb/TS3694#USB
    If it does not help, the drop probably damaged something inside the phone.

  • Hello to everyone, I have a problem with my iPhone 5, the dynimic doesn't work... i didn't drop it and didn't contact with water... so should I do? please help me =(  P.S. may be I wrote with some mistakes, so I apologyze for it

    hello to everyone, I have a problem with my iPhone 5, the dynimic doesn't work... I didn't drop it and didn't contact with water...
    so what should I do? please help me =( 
    P.S. may be I wrote with some mistakes, so I apologyze for it

    Hello darkhanfromaktobe,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Have a nice day,
    Mario

  • I dropped my iPhone in the sink

    i dropped my iphone in the sink when i was washing my hands. it just had water sort of splashed on the screen and i immediately took it out and dried it off and everything was fine. it was sitting for about an hour and i wasn't using it. then when i tried to turn it on and use it nothing happened. like i said, the phone was dried and it was working before. is there any way i can fix this?

    $149
    They do not repair .Apple exchange and all returned units are refurbished at The Apple plants in China
    So you get a device that looks like and functions like new
    Are you familiar with the results of water and electricity mixing

  • My new iPhone 4 doesn't work at all

    You are definitely not alone with your issues. I'm on my second iPhone 4 unit, and am still having the same problems. I've had proximity sensor insanity, battery draining after 8 hours of stand-by (NO USE, just sleeping) to the point that my phone goes into a coma and has to be plugged in to be revived, the grip of death dropping calls....
    But the single most irritating and infuriating problem is the signal strength/reception fluctuation. I share a house with two iPhone 3Gs users, and I had an original silverback iphone until July 2010. They all work fantastically well with no issues when I'm at home (where I am just about 24/7, since I work from home). *_My new iPhone 4 doesn't work at all.*_. Signal strength is all over the place. I did a test where I sat watching the bars showing signal strength for five minutes. In that time, I saw it switch from E (edge?) with full bars to 3G with full bars to 3G with 1 bar to 2 bars to 4 bars to 1 bar to "Searching." Then back to 3G, with degradation of bars from 3 to none, then E network appears again, this time with full strength. This all with the phone sitting on a table, not being touched by human hands.
    It seems that my iPhone is constantly switching actual physical networks, and as a result signal strength is all over the place from one 30 second period of time to the next. This drains the battery like crazy, and means that all incoming calls go to voicemail--usually without my phone ever ringing.
    The 3G phones in my house work great. The 1st G iPhone I have had since the week it came out worked great (though its battery doesn't hold much of a charge anymore, after three years). On my new IP4, games are awesome. The videos and photos are amazingly clear and high quality, and editing on the phone is out of sight. iPhone Apps rule. MobileMe syncs my contacts quickly and easy. The only thing I love more than the iP4 features is my iPad--it rocks.
    Everything works on my IP4 at home BUT THE ACTUAL TELEPHONE FUNCTIONS. This is unacceptable. In late August, after two weeks in which I had 4 minutes of phone use, the nice folks at the Apple store switched me to a new phone, no questions asked. The phone worked so much better, I could send texts and place calls most of the time (this was now the first part of September)...except that now that I was using my IP4 to make phone calls, I started having a problem with the proximity sensor during those calls. I'd be talking and my cheek would mute the phone, turn on speaker, open contacts and edit info (with gobbledygook), and of course, hang up on people.
    So around Sept. 18 I was told by Apple phone support to update to iOS 4.2, restore as new, and do two complete power up and drain down cycles. This would fix the proximity sensor and any other issues.
    Well, I would love to see if iOS 4.2 actually did fix the PS, but I can't get the signal strength to stabilize long enough to have an actual phone conversation. I'm back to watching the signal strength go up and down at random (with me touching/holding it carefully to avoid grip of death, and also when I leave phone on the table with screen lock off --no touching). It is back to switching between E network and 3G and varying strengths of wi-fi from my home network. This eats up battery from 100% to low enough to turn off in under 10 hours of standby (usually 6-7). Essentially, my IP4 is back to being unusable as a phone.
    So I did another long, involved call to Apple tech support on 9/18. They tell me that I have to turn off wi-fi, turn off 3G, turn off push/fetch and notifications, shut all apps (no multi-tasking) and do everything but switch my phone to airplane mode--and see if the battery holds up for 24 hours in standby. If that didn't work, I should restore from new, but not load any contacts or network or data or anything--just leave it as it would be out of the box new.
    As a test, I turned everything off as advised: 3G, wi-fi, push, etc. Now my battery life is back to normal, where I can have the IP4 on stand-by for up to two full days before needing a recharge. Fabulous. BUT IT'S NOT A SMART PHONE if I have to turn off 3G, turn off wireless, and not use email push and so forth.
    I'm so frustrated I could scream. I'm quickly coming to the conclusion that there is a significant flaw in the new iPhone. Or perhaps it is just an issue for iPhone 4 users in areas where the signal strength is marginal, or where there are two types of overlapping network coverage (E and 3G in my case). I know that the networks themselves are in good condition--though I'm in a semi-rural area, the state capital is 4 miles away, and I know they have a new tower and good coverage for the politicians and power brokers around town. The phone coverage area I live in has Edge network in the south part of the network area and 3G in the north part, which is the state capital. I'm right in between. Could this be the problem? AT&T says no, it's Apple's fault.
    Message was edited by: HighSierra

    So what to do besides complain? Troubleshoot?
    I just wonder if all of us who have had chronic signal strength and "Searching for network" issues that totally drain the battery might have something in common, despite being all over the world? I'm using wi-fi 95% of the time, and live in a semi-rural area with overlapping networks run by same carrier. Apple folks hinted that maybe in my area the network usage is nearing capacity (resulting in getting kicked off of 3G and down to E as new calls are placed that strain capacity). They also hinted there could be interference from mountains or other objects. But here's the thing--3G phones work fine, and my IP4 works fine when I'm away from home, usually in the capital city on strong 3G network. (When I say "works fine I mean the signal is good and calls go through, I haven't tested battery drain away from home yet).
    I have to conclude that the problem is the IP4 itself--something about the hardware or the software (namely, the way it connects to the phone network) is horribly wrong. Other folks who live in urban areas or with strong networks that (likely) aren't over-utilized don't seem to have this issue. After reading through these pages, it also seems the wi-fi may be a major culprit in draining the battery and in varying signal strength (this is from Apple phone support, which said that varying signal strength and the constant pinging off the home wi-fi is creating a "power struggle" and keeping the phone constantly looking for the best connection option). Mind you, 3G iphones on the same home network have no problems whatsoever.
    So while I'm not a technical expert, it seems like the problem HAS to lie in the differences in the way the IP4 connects to the cellular and/or wi-fi network. And since the connection/signal strength problem was "resolved" on my replacement phone, but then "broken" again by the software update of iOS 4.2, I'm leaning toward this being a software issue. I've offered to help Apple troubleshoot, and I'm trying to be patient--because the IP4 is a work of art and I've never had an issue with an Apple product before. But all they want me to do is restore, restore, reload, restore, and then drive 1 hour to the nearest Apple store (in Reno, NV) and get a new phone...and start the whole process over again. I don't have time for this, I need my phone back.
    I'm this close to trading in my beautiful but flawed IP4 for a 3G. Maybe I should just get a new battery for my original iPhone from 2007?
    I understand that Apple can't test for every possible variable of use all over the world, but they don't even seem to acknowledge that they have a problem with the IP4 that will not be resolved by replacing it with a new unit. They want me to believe it's a fluke, or it's just me...but I've been combing these threads and see a lot of people reporting the same issues I am--battery drain and wildly fluctuating signal strength issues, wi-fi problems, and dropped calls. Can't someone get on this? Because otherwise Apple is going to have to admit that their IP4 is not a good solution for people who live in areas of less than perfect signal strength or use wifi or whatever demonic combo I have in my home/work setting.
    Or people will have to do what I have done--if you who want the cool IP4 non-phone features, you will have to dumb down your IP4 in order to have it be even moderately useful as *a phone.* For $599 I expected better.
    My (temporary) workaround?
    To spare the battery:
    *Turn off wi-fi (which *****, because now I have to burn minutes when I'm at work using the email, downloads, safari, etc--and it's E network, so it's SLLOOOOOOOW)
    *turn off push and fetch, have mail get new messages manually
    *turn off data roaming
    To keep the signal somewhat stable (making it easier to complete calls and spare battery)
    *Turn off 3G (this leaves me on E network--fabulous, I had that with my 3 year old iPhone)
    *grip IP4 between two fingers placed at the top of the phone, away from death zone. Tough for us lefty phone users.
    *pray the free bumper will a) come soon and b) help. I'm not optimistic.
    To keep proximity sensor from going nuts and dropping calls, muting, turning on speaker etc:
    *use headset or bluetooth (unless you are also having one of the known bluetooth issues!)
    *keep phone pressed to one ear and don't move it a millimeter. Don't shift sides, don't hold phone with your shoulder, just keep it to one ear and talk fast).
    I'm about out of patience. I understand that lots of folks have and love their IP4s. I'd love to be one of those people. I'm open to suggestions and have spent many hours on phone with tech support, restoring my phone, reloading data and apps--there has to be a better way.
    Sorry for the thread-jacking, but someone from Apple has got to be following these threads--help us!
    null

  • IPhone/iTunes Wifi sync doesn't work

    Hi guys,
    I don't even have hope to solve this problem anymore but I guess I should post this anyway and show apple the crap software they're giving us.
    I'm on Lion 10.7.4 (iTunes 10.6.1) and, after upgrading my iPhone 4 to iOS 5.1.1, my Wifi sync with iTunes stopped working. Out of nowhere. Looking for an answer I started digging on apple foruns and found out there are dozens of threads discussing the problem and literally hundreds of possible solutions. I've tried the following:
    - Restart iTunes and iPhone (full power cycle).
    - Check the "Sync over Wifi" option on iTunes when iPhone is connected using cable
    - Uncheck the "Block iPhone, iPod and iPad from automatically sync" on iTunes > preferences > devices.
    - Restart Router
    - Reinstalling iTunes
    - Restore iPhone
    - Move to trash "com.apple.iTunes" and "MobileDevices.framework" files. Restart Mac after.
    - Make Airport on Mac and iPhone forget the saved networks and reconfig them
    - Open ports on router 123 (all), 3689 (TCP) and 5353 (UDP)
    - Disable and enable uPnP on router
    - Install Remote app
    - Use "Release Liase" option on iPhone under Settings > General > Network > Wifi > Blue Arrow
    NONE solved it. I gave up. Apple *****.
    Interesting behaviours:
    - Remote app doesn't work at all. I can't use it under Home Sharing or that code thing. My phone and Mac simple can't see each other anymore.
    - iPhone conects fine using cable. Everything is working and, when I pull out the cable, iPhone vanish from the list. Even with the Wifi option enabled.
    So, if any of you can solve it, you will have a place in heaven. And in Apple developing team, probably.
    Thank you!

    Hi guys,
    As I suspected, none of the previous solutions worked. I strongly believe this is some crap in iOS 5.1.1 OR iTunes 10.6.1. More precisely: this is APPLE fault, not something we did wrong or didn't do.
    My Wifi sync worked great before this updates (Lion 10.7.2 and iOS 5.0). I can't isolate the problem because I did both updates in less than 24h from one another. Now I'm back to cable and I think I'll still be until Mountain Lion is out.
    @rodrigonewtonI sent apple my feedback. Basically everything I wrote here. And I can't connect bluetooth either. Luckily I barely use bluetooth on my Mac.
    @ou812ManySushi Lucky you! I'd already tried this without success. What is your iTunes and iOS?
    @joejohns90 Doesn't work here, the option is ALWAYS greyed, waiting for my Mac to do something. The only way the "sync over Wifi" button work is pluging the cable. Ironic, isn't it?
    Anyway, thanks for the feedbacks guys!

  • The screen of my iphone is broken and doesn't work anymore. Is there a way to type in my passcode on the computer/itunes?

    The screen of my iphone is broken and doesn't work anymore. Is there a way to type in my passcode on the computer/itunes?

    No, get the screen fixed.

  • My iphone 5 went into search mode and I can't place or receive calls or use the internet but my text messages work. Sprint had me do a master reset and my phone doesn't work at all now I can't get it past the activation. Will I have to pay in store?

    My iphone 5 went into search mode and I can't place or receive calls or use the internet but my text messages work. Sprint had me do a master reset and my phone doesn't work at all now I can't get it past the activation. Will I have to pay for repairs in store because I didnt get the Apple care plan when I purchased it. Sprint said it may be a phone problem not sure if I should take it to Sprint or Apple...I just need my phone

    I'm sorry to learn that you are not able to make/receive calls chelseabee! (ticket number removed) results indicate that there is no issues with the network or account provisioning. Since you have already done a hard reset http://vz.to/1gBkSJc (as per your post), I recommend exploring replacement options. If your phone is within the one year manufacturers' warranty we can provide a Certified Like New replacement http://vz.to/uyYF0o as long as no physical/liquid damage exist. If your phone has sustained physical/water damage and you have insurance, you can submit a claim to the insurance company online at this link http://bit.ly/07CrqPK
    AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport
    >> Edited to comply with the Verizon Wireless Terms of Service <<
    Edited by:  Verizon Moderator

  • How do I get my music from Media center to my iphone. Itunes won't import the MC music library, and MC won't recognize and synch to the iphone so I can't load playlists from MC to my iphone. Itunes help doesn't work.

    How do I get my music from Media Center to my iphone 4s. Itunes 10.5 won't import the MC music library, and MC won't recognize and synch to the iphone plugged into the USB port so I can't load playlists from MC to my iphone. Itunes help doesn't work.

    Hello and welcome to the support community
    As you know, your iPhone 5 is not compatible with our iBook G4. To get your music in iTunes from your iBook to your iPhone you would need to migrate the music files to a newer intel based Mac. A Mac which has Mac OS X 10.6 or higher installed. Then sync your iPhone 5.

  • Help iPhone 4 "Power Button doesn't work", how can I get repair it and how much will cost, want to keep same phone everything works fine not power button. :(

    My iPhone 4 power button doesn't work, how can I get repair it and how much will cost, want to keep same phone everything works fine not power button not working unable used my phone. My warranty is Expired how much will cost to put it on my phone plan? Thanks!

    Hi Julio,
    Here's a link for your question:
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
    Cheers,
    GB

  • My iphone 5c the sound doesn't work only with earphone.

    my iphone 5c the sound doesn't work it works only with earphone.

    Hi there lavodette,
    You may find the troubleshooting steps in the article below helpful.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    -Griff W. 

  • HT4623 My iPhone 4S speaker suddently doesn't work properly from one week ago? How I can do? 4s is still under warranty?

    My iPhone 4S speaker suddently doesn't work properly from one week ago? How I can do? 4s is still under warranty?

    Have you tried any troubleshooting steps, like resetting you iPhone, for example?  Or restoring it?
    If not by all means do so because your problem could be caused by software glitches that could be solved resetting or restoring.
    Warranty is for one year from date of purchase and two years if you bought Apple Care at the time of purchase. If your iPhone has a hardware issue within warranty, it would be replaced by Apple.  If it is already out of warranty, you might be eligible for an out of warranty replacement where you pay a much lower amount but this varies according to the country and currency, so it is better to check with Apple or with an authorized reseller.
    You could check your warranty status here:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • Finally got round to buying an iPhone 4, really excellent to start with. The sharing of music from my Mac Mini was excellent. ios6 update has ruined all that! The artist view miss's out most of my music and the sharing sometimes doesn't work at all!

    Finally got round to buying an iPhone 4, really excellent to start with. The sharing of music from my Mac Mini was excellent. ios6 update has ruined all that! The artist view miss's out most of my music and the sharing sometimes doesn't work at all!
    How do I get this feature working again? I am reluctant to move to iTunes 10.7 because I don't trust Apple at the moment.

    My suggestion:
    1) Always using MAC AIR with the power plug in.
    2)Don' let the power level of battory fall under 30% percentage.
    3)If the MAC can't be recharged now, just let it be with power plugged, WAIT...

Maybe you are looking for

  • Regarding Exporting and Importing internal table

    Hello Experts, I have two programs: 1) Main program: It create batch jobs through open_job,submit and close job.Giving sub program as SUBMIT. I am using Export IT to memory id 'MID' to export internal table data to sap memory in the subprogram. The d

  • I use iMac desktop. I can't save web pages as PDF file by using Firefox, but by Safari is fine.

    I'm using Mac OS X 10.6.4. Today, I tried to save my email content as a PDF file. However, I only got a PDF file that have partial content of email. Then I adjust the printer setting and did it again, then I only got a blank PDF file. There was nothi

  • Final Cut Pro 7 export drops frames

    I exported a video from Final Cut Pro 7 to a Quicktime .mov file.  The file plays fine on a mac, but when I try to play it on a pc it drops frames throughout the video.  I have other .mov files on this pc also exported from fcp7 that play just fine.

  • Not understandable message, no sender found..

    Hi guys! I have trobles with my IDoc -> SOAP scenario.. I have configured all needed objects and when I run scenario test, I get error in german: Die nachricht ist unvollstaendig. Es wurde kein sender gefunden. (<a href="http://jarunek.host.sk/sap/er

  • I'm new to jsf VWP..i need code for searching

    Hi, i need code for search... just populate records from database using jsf VWP5.5.1 how to bind in table. we enter name r value in textbox click button related records display to table.how write code in button. pls help me....