I dropped my ipod in water and now the screen wont respond to my touch, would resetting it make it work again?
I can still see everything and it's charging but I read somewhere that if I reset it that it would work again but I'm not sure if that is true and I don't know how to reset it
That happened to my mom's phone. but she dropped it in tea:( If I were you, the best bet would be to put it in a bowl of rice, so that it is covered, and leave it there for a few days. The rice will hopefully soak up all of the water that's in your iPod. Hope this helps!
Similar Messages
-
Please help
I'm in no way an iPod technician - but I have the same model as you. If you have cracks in the screen, I'm pretty sure you need to get the screen replaced. You can see what's involved by looking here:
http://www.rapidrepair.com/Merchant2/merchant.mvc?Screen=cp-ipodtouch2g
Unless you're already an electronic technician, you'd be better off having it repaired.
Having said that, you might compare the repair price with what a newer iPod Touch would cost you. Here's just one sample page with pricing:
http://www.amazon.com/iPod-Computers/b?ie=UTF8&node=13660271
If you buy a used one, it might be just a little more than the repair cost.
(.....strange - I just came here to the forum to ask a questioin about my own iPod 2nd gen device, which I might be replacing with a newer one....) -
I dropped something on my mac and now the screen is messed up. Can this be fixed?
I am a performer and I had a mic on a mic stand in my room while I was practicing. I accidentally moved the wrong way and knocked my mic off of my stand onto my macbook pro and now the screen is messed. I don't really know a lot about computers so I was wondering, if I take my macbook to the apple store will they be able to fix it? Also, If they can fix it, any idea how much it would cost. Thanks!
The repair will be a replacement. It is an expensive repair well into the hundreds of dollars.
Ciao. -
My ipod got wet and now the screen does not respond to touch
i droped my ipod touch in some water and used the rice method to save it but now now it will turn on but it won't respond when i try to touch it. any ideas
Try restoring to factory defaults/new iPod. If yu still have the problem then it appears that the water damaged your iPod and service is required.
-
I somehow knocked my iphone 4s in the sink of water and everything seems to work except the camera. Is there a way to reinstall the software or does anyone know what I can do other than using phone protection insurance? All my pictures are there and they upload and share but just can't get the camera to take pictures.
The device is damage, it was dropped in water. You are lucky that the device works at all.
-
I was using my iPad one morning looking at ebay, and then I locked it and came back and when I clicked the home button nothing happend. When I clicked the lock button nothing happened, when I plugged it into iTunes nothing happened and it didn't show uunder "Devices" on to side. Please help me I don't know how to fix this and it's been two days since it happened.
I would then try and do a hard reset like Fernando recomends if that doesnt work you might need to try a DFU Restore.
How To DFU Restore -
I reset my IPod because there were gray lines down the screen, and now the screen is flickering, any ideas?
Try:
- Reset the iOS device. Nothing will be lost (not sure which reset you did)
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
A very good friend of mine dropped her iphone into water and now it is not working.Her husband recently passed away and text messages from him and from well wishers after his decease are feared lost. Is there any way to retrieve them?
I suggested contacting Compub in Nassau St as the info is priceless and worth the trouble of trying to regain?
Any thoughts? The poor lady is very distressIf she has backed up her iPhone she can replace that iPhone and set up the new iPhone from her backup.
You can put the iPhone that went into water into a plastic baggie with either new silica gel packets (preferred) or raw rice and let it sit for 4 - 5 days. After that time remove the phone and connect it to power for at least a half hour. While it is still connected to power reset it by holding down the power and hold button, wait for the Apple logo then let go of the buttons. Might take several tries. If it revives immediately back it up. -
HT1320 Dropped my ipod and now the screen is flipped upsidedown. How do I get it back?
I dropped my ipod nano and now the screen is flipped upside down, how do I get it back?
Reset your iPod
-
My daughter dropped her sister Ipod gen 4 32Gb and now the screen only comes up with a white screen. What should I do?
If you have an Apple Store near you, take it there and have them check it. If you don't, I would send it in for service.
-
i dropped my ipod in water ... the backlight will come on when the battery is dead and i plug it in .. but when it is on the home screen it won't come on
After drying the iPod in a sealed container od uncooked rice for a week with changing the rice daily, try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem likely caused by the water. -
My ipod recently cracked and now the right side of the touchscreen is not working. I can't even unlock the touch screen. How do I fix this problem if it even can be fixed?
You can pay to have it repaired.
-
I tried updating my iPod touch 4th gen and now the screen is bright blue or flashing white and black lines.ive tried the whole home and power button thing but it only brings up the apple icons then goes back to the blue or other screen.please help?
This has worked for some others.
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Dropped my ipad and now the screen is fuzzy can I fix?
dropped my ipad and now the screen is fuzzy, can it be fixed?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset > http://support.apple.com/kb/ht1430
Restoring > http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
I dropped my phone and now the screen is going funny.
i dropped my iphone on the ground and now the screen is going funny. by that i mean it doesn't always click on the things i want and it doesn't let me unlock my phone, what should i do?
Get it fixed. Take it to an Apple Store for them to look at.
Dropping electronics on hard surfaces does have a habit of making them go "funny" - best to avoid doing that if you can.
Maybe you are looking for
-
Solution Manager 4.0 SR2: Error during step 1 installPolicyArchive
Hi, I faced a really annoying problem in first step of Installation of a SAP Solution Manager 4.0 SR2 on Suse Linux Enterprise Server 10. The Installation hangs in Phase 1 installPolicyArchive. I think i have passed all prerequisites before starting
-
hi expert , when i use tcode me21n create a purchase number and use the tcode me29n to release the purchase order but return the systmen message , i can't be relase does anyone know what's the matter ? i create the purchase order without any error me
-
MethodBinding from commandLink not being called
Hello, I am building a dynamic datatable and everything is being rendered fine. However, now I want to implement row selection on the table and am doing so by rendering a commandLink on each row that the user can click to select the row. I would like
-
Interactive Reporting issue on Windows Server 64 Bit
Hi All, I am facing on Interactive reporting couldn't run on workspace, here are my Hyperion enviroment. 1. Hyperion version 11.1.2.1 2. All Hyperion component are running on Windows Server 2008 64 Bit 3. Installed Essbase client on the server that W
-
Smart Collection not letting me click Save
Hello, I have no smart collections or regular collections created. I am trying to create a smart collection containing all the photographs with the keyword Goofy in them. 1. I click "Create new smart collection" 2. Look in: 'my photos' folder 3. Crit