I dropped my phone and the touch screen has stopped recieving, what can i do to fix it?
i dropped my phone and the screen cracked and now the touch screen usability has diminished, what can i do to fix/repair it?
Get it serviced.
Similar Messages
-
My touch screen has stopped working. what can i do to fix this
what can I do to fix my touchscreen
Rebooting your iDevice
Hold down the Sleep (On-Off) and Home buttons together for about 10-15 seconds or until the Apple Logo appears - ignore the red slider if it appears - then let go of the buttons. The device should begin to start up.
If this doesn't work then make a Genius Appointment and take it in for service. -
I have a fairly new iPod touch and the touch screen has suddenly stopped working..... Like the bottom row of apps has stopped working and certain buttons on the keypad are not working at all what so ever I have taken it to the apple store once before they told me to update it I did so and it didn't get better I have also restored it multiple times still nothing I really would like a working I pod please help!!!
If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar -
I have done a hard reboot and yet the touch screen still does not respond
Troubleshooting Touchscreen Response...
http://support.apple.com/kb/ts1827
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430 -
is it possible to enter the lock screen with itunes or something else because i've damaged my phone and the touch screen is damaged that i'm not able to unlock it to make a backup on itunes ?
it would be very important to put the data from iphone 5 to my new 5s ..
looking forward to get some help
thxYou cant unlock your phone unless you put in your password. It may be possible that the apple store could do something about it.
-
I have an HP Touchsmart 610 1130y pc and the touch screen is not working - how can I fix it?
Does anyone know how to get the touch screen on an HP Touchsmart 610 1130y pc working again? I get an error message "CLL error: 80004005.
Ingo, the reset has worked, pressing home and sleep buttons together! The problem is that the screen turned black and the iPod does not start again.
Yesterday, I wrapped the iPod with a plastic. Today, the slide to unlock is moving, but still not reaching the end of the slide bar.
What should I do now? Try to charge it and reset it on iTunes?
(thanks, you're really helping me) -
When I try to open up itunes I am getting the message that itunes has stopped working and then microsoft sends an error message to find a solution. What can I do to fix my itunes?
First you can try;
Try restarting PC and run itunes again!
If error again than perform clean instal of itunes (uninstal first and than instal again)! -
I keep getting the message itunes has stopped working. A problem has caused itunes to stop working correctly. What can be the cause?
Hello Main Event,
Thank you for using Apple Support Communities!
I found this article while researching iTunes quitting unexpectedly on Windows 7 and feel it will help to resolve the issue here.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
It starts with troubleshooting 3rd party plug ins, then moves on to account troubleshooting if needed.
Open iTunes in Safe Mode to isolate any inference with plug-ins or scripts not manufactured by Apple.
Hold down the Shift and Control keys while opening iTunes. If performed correctly, you should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
After clicking Continue, determine whether the issue you were experiencing persists in Safe Mode.
If you see the same issue while iTunes is in Safe Mode, proceed to the Create a New User Account section below. If you do not experience the same issue, consult iTunes: Troubleshooting issues with third-party iTunes plug-insfor steps on how to remove third-party plug-ins.
Take care,
Sterling -
It's a 4th gen iPod touch and I need to know what apple will do for me
Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
My itunes has stopped playing music. I recently downloaded more music and now it has stopped playing, it says it is playing but there is no sound and the time bar does not move from 0. I have uninstalled all apple apps on my laptop and reinstalled and then updated the software. I have tried 'repair' aswell but nothing has worked.
Songs in the itunes store are also not working
-
Need help! Not sure why this happened. When I plug it into the computer it says I have to enter the password on the ipod, which iam unable. Reseting it also doesn't work.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
we did a factory restore on my ipod touch and now all we get is a pinapple that pops up. how do we open to the home screen
This is jailbroken
We are forbidden to talk about this
Learn more here
http://support.apple.com/kb/HT3743 -
Please help! I dropped my phone and the screen went black but I can still hear when I get a call or text.. How can I fix this?
See Here for > Frozen or unresponsive iPhone
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
My iPhone 4S seems to be in visual impaired mode, and the touch screen no longer works. I have tried rebooting the phone without success. How can I get back to normal mode?
I solved my own problem by clicking the home button 3 times.
-
My iphone 4s fell from the bed and the front screen glass got cracked but the touch screen is working fine, so can i replace just that screen glass?? If not what am i to do ? And how much it might cost me for that repairing??
I don't know. You'll have to ask.
FYI, if the phone was not originally sold in India, it can not be serviced in India. You will have to take it back to the country where it originated.
Maybe you are looking for
-
Javax.mail CSV file attachment corrupt?
I'm having some trouble with attaching a file to an outgoing email, it's a CSV file and when it is uploaded/attached to the email, it becomes "corrupt". Excel will still open it but if I open it in notepad the formatting is noticeably messed up. I ne
-
I just got a new computer and I transfered all of my old music via an external hard drive to the new one. All the music showed up in itunes fine so I deleted the old files. Then I went to sync my iphone I got an error that said "The song... Could n
-
Cant Install itunes on my pc.
(win7, 2gb ram, 32bit). Whenever I run the setup it stops in between and gives a msg ''An error occured during the installtn of assmbly - Microsoft.VC80.CRT.Version = ''8.0 50727.4053'' ,type='' win32'', publickey Token=''1fc8b3b9a1e18e3b'',process o
-
How to create a single business service against multiple Queues in OSB
Can I create one business servcie against multiple jms queues. and based on content routing i want to pass the queues' JNDIname for example jms://localhost:7001/jms.cf/$variable_queueName and in runtime i want to provide the queue name for variable "
-
SAP Security - Cost Centers and Profit Centers
Hi All, We want to have the ability to restrict roles on cost center and profit center per the cost center/profit center owner. For example, we only want to allow users whom own cost centers to be able to see the cost centers they own. The problem th