I dropped my phone last night, already with a little bit of glass missing at the top. The screen has gone black with blue lines down it and i cant even see my home screen. I've tried holding down the power and home button, someone please help
I dropped my phone last night, already with a little glass missing at the top. The screen is black with blue vertical lines, I cant even see my home screen I've tried holding the home and power button. Someome help?
It's broken. Take it to Apple.
Similar Messages
-
Udating my ipa and the screen has gone black with just the apple logo and an updat bar. I cant turn it on/off.
TRY THIS TRICK.... IT HAS HELPED ME SO MANY TIMES!!!
hold down the power button and the home button for about 6-8 seconds or until the screen goes black.... -
Aspire E 15 ES1-511 series screen has gone black with no cursor
Ever since I upgraded to windows 10 I've been having major issues with my screen brightness being too bright with the brightness controls inverted and my laptop not being able to restart properly always getting stuck at the acer bootup screen with the loading loop frozen(seen as two vertical dots). In response to these issues I chose to reset by removing all items and not choosing the factory default option. However when the reset was done and I was setting up my laptop, I accidently closed the lid during critical updates. After setup my laptop was working normally and I wanted to check for more updates. There was a new update and I assumed this would be more fixes so I had to restart my acer. My acer once again got frozen at bootup only this time when I boot it up multiple times I was introduced with the troubleshoot menu. I decided to reset my acer once again. A while later, I saw the screen at 99%. Later I saw that my laptop was starting to bootup, but then it got frozen at the acer logo with the two vertical dots. I shut it down and now my laptop has a black screen without a cursor. I've attempted alt f10, f2/f10, and pressing the pinhole button on the bottom of my acer. The screen is still black. I've not yet attempted to just keep my laptop on for a long while. I am staunch with the fact that the windows 10 update is the cause of all this. Please let me know if there are any other solutions.
ES1-551I had the issue too after the windows 10 upgrade. While plugged into the charger the screen would boot to black and nothing worked to restart the boot process. However it I un-plugged from the charger it would boot fine. While unplugged if I plugged in the charger the screen would go black again. This worked for me; while plugged into the charger I pressed the start button and held down the F12 key. I continued to hold the F12 key until the screen became gray. I released the F12 key and waited. The Window logon screen came on and all functionality returned. Good luck.
-
i dropped my phone last night on the floor and now it doesn't seem to be charging.
it comes up the battery on the screen but doesn't actually seem to charge.
i kept it on charge over night but that didn't work either.
can anyone help?You need to get your phone repaired. It's obviously damaged, and nothing we can suggest to you will fix that.
-
We have iPhone 4 and I plugged phone into after market hardwired plug in car (that we have used successfully for two years). The screen has gone black and wont turn on. Phone was charged. I have tried force quit- home screen and top button. iTunes is not recognizing phone when I plug into computer. help pls
FIRST charge with an Apple charger for at least 15 minutes. Then hold the HOME and SLEEP buttons at the same time until an Apple logo appears. Hold for up to 30 seconds. If nothing happens the phone hardware has failed.
-
My iPad screen has gone black. I have tried resetting it with the sleep and home buttons and it only flashes the apple on the screen for a nano second and then it goes black again. I can even hear notifications arriving, but I cannot see anything...I'd rather not reset it to the factory settings as I have a lot of things I worry about using. Either way seems to me that the system itself is working since I can hear it working, but its the screen that isn't. It has not been dropped and has been in a case for years! Please help!
When the power is on and I press the home button, I can slide my finger where the slider bar "would be" and it makes the noise as if its "opening" flashes a blue screen then returns black...
-
my iphone 5 screen has gone black in the middle of updating a app. i have tried to back it up using itunes and restore it however it will not restore my phone as i have got the app find my iphone switched on. i cannot turn it off as the screen is black. can anyone help me please??
christobell86 wrote:
... it will not restore my phone as i have got the app find my iphone switched on.
You can access iCloud.com on a computer to turn it off.
http://support.apple.com/kb/PH2702 -
When I went to update my iPod touch on iTunes, it said unable to update then the iPod shutdown and no longer showed connected in iTunes. I have tried holding down both buttons for up to 3 mins with no luck turning it on, even after a full charge. Help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I'm trying to backup my iphone and restore it because the screen has gone black. It won't allow me to do anything without putting in the passcode. I can't put in the passcode because the screen is black.
Try rebooting it (hold home and power together for 15-20 seconds). If the display doesn't come back to life, you're out of luck. You're supposed to back it up before it fails. It's too late to do so after the fact.
-
M y ipad has gone black with only the Apple logo showing afte I tried to reset. How can I restart.
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
From Here
http://support.apple.com/kb/TS3281
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
I purchased Macbook Pro i5 in March 2011. Now the screen has problem; one vertical blue line is in the screen (at the right side). I noticed this last week when I opened the macbook and now I am always seening it. I am seeing the blue vertical line always in the screen. However, I am not seeing this line when I open Word, Excel, PowerPoint files (without pictures). But I am seeing this line always when I see movies, pictures, and all the files which have pictures. Please do let me know how can I remove this vertical blue line (blue tint) pernamentally from the screen.
Regards,
UjjalBackup your files to a external hard drive and disconnect.
Call Apple and make a warranty call, then take it to the nearest Apple Store etc.
You can run these things and it might clear your issue or give further informaiton
Perform a hardware check
http://support.apple.com/kb/ht1509
Then see if resetting the SMC/PRAM resolve your issue
http://support.apple.com/kb/HT3964
https://support.apple.com/kb/HT1379 -
My Ipod touch screen has gone white with bright white spots on it. I have restored it and it shows in ITunes but the screen is still white. Is there anything I can do? The warranty has run out so I will have to pay for any repairs (if it can be repaired). Any help would be much appreciated. Thank you in advance.
If you still have problems after restoring the iPod to factory defaults/new iPod then you very likely have a hardware problem. I would make an appointment at the Genius Bar of an Apple store.
-
my iphone screen has gone white with a few grey lines down the right hand side.. Has anyone any idea how I can solve this and get my screen back to normal..? Thanks
Hi tag71,
If you are having issues with the display on your iPhone, you may find the Display portion of the following article helpful:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Regards,
- Brenden -
My ipad 2 screen has gone black
My ipad 2 screen has gone black. The only thing that shows is the circular processing icon. I have tried turning it off and on and it won't even do that. Any ideas? Thank you!
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
-
My iPads screen has gone black. Ive tried to turn fixing it by holding in sleep and home button for 15 seconds but it hasnt worked
what else can i do??Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom
Maybe you are looking for
-
Can Swing/ADF directly deploy on application server?
Hi, After creation of Swing/ADF rich client in JDevelopment, is there any way to deploy this as a WAR file on application server or this ADF option is only for direct client/server mode deployment?
-
File sent by email is not opening.
To whom it may concern, I am running on Adobe Reader XI. I have a friend who sent me three .pdf files only one of the files works. It gives me a message that the file is not supported or corrupted Why? What is the solution to the problem? Sincerely,
-
IPhone, iPhoto and Flickr
Any idea as to why when uploading pictures to Flickr from iPhoto that it scrambles up the orde in which they were taken?
-
I'm new to Dreamweaver and have imported an existing site. The site has a number of JPG's that have been divided up into different folders for ease of location. But Dreamweaver imported those assets as one long alphabetical list. Is there any way to
-
Using iWeb'06 on 10.4.11, wont publish to .Mac? theres no option to publish it to MobileMe? ideas?